LKML Archive on lore.kernel.org
 help / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, p.zabel@pengutronix.de,
	mka@chromium.org, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	mark.rutland@arm.com, linux-arm-msm@vger.kernel.org,
	tsoni@codeaurora.org, Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH v3 1/6] dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
Date: Thu, 30 Aug 2018 00:42:10 +0530
Message-ID: <20180829191215.10071-2-sibis@codeaurora.org> (raw)
In-Reply-To: <20180829191215.10071-1-sibis@codeaurora.org>

Add PDC Global (Power Domain Controller) binding for SDM845 SoCs.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 .../bindings/reset/qcom,pdc-global.txt        | 52 +++++++++++++++++++
 include/dt-bindings/reset/qcom,sdm845-pdc.h   | 20 +++++++
 2 files changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
 create mode 100644 include/dt-bindings/reset/qcom,sdm845-pdc.h

diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
new file mode 100644
index 000000000000..a62a492843e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
@@ -0,0 +1,52 @@
+PDC Global
+======================================
+
+This binding describes a reset-controller found on PDC-Global (Power Domain
+Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
+
+Required properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be:
+		    "qcom,sdm845-pdc-global"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the register
+	            space.
+
+- #reset-cells:
+	Usage: required
+	Value type: <uint>
+	Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+pdc_reset: reset-controller@b2e0000 {
+	compatible = "qcom,sdm845-pdc-global";
+	reg = <0xb2e0000 0x20000>;
+	#reset-cells = <1>;
+};
+
+PDC reset clients
+======================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For a list of all valid reset indices see
+<dt-bindings/reset/qcom,sdm845-pdc.h>
+
+Example:
+
+modem-pil@4080000 {
+	...
+
+	resets = <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "pdc_reset";
+
+	...
+};
diff --git a/include/dt-bindings/reset/qcom,sdm845-pdc.h b/include/dt-bindings/reset/qcom,sdm845-pdc.h
new file mode 100644
index 000000000000..53c37f9c319a
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sdm845-pdc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_PDC_SDM_845_H
+#define _DT_BINDINGS_RESET_PDC_SDM_845_H
+
+#define PDC_APPS_SYNC_RESET	0
+#define PDC_SP_SYNC_RESET	1
+#define PDC_AUDIO_SYNC_RESET	2
+#define PDC_SENSORS_SYNC_RESET	3
+#define PDC_AOP_SYNC_RESET	4
+#define PDC_DEBUG_SYNC_RESET	5
+#define PDC_GPU_SYNC_RESET	6
+#define PDC_DISPLAY_SYNC_RESET	7
+#define PDC_COMPUTE_SYNC_RESET	8
+#define PDC_MODEM_SYNC_RESET	9
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-29 19:12 [PATCH v3 0/6] Add support for PDC Global on " Sibi Sankar
2018-08-29 19:12 ` Sibi Sankar [this message]
2018-08-29 19:12 ` [PATCH v3 2/6] reset: qcom: PDC Global (Power Domain Controller) reset controller Sibi Sankar
2018-09-03 19:31   ` Bjorn Andersson
2018-08-29 19:12 ` [PATCH v3 3/6] dt-bindings: remoteproc: qcom: Remove additional definition tag Sibi Sankar
2018-09-03 19:32   ` Bjorn Andersson
2018-09-10 18:28   ` Rob Herring
2018-08-29 19:12 ` [PATCH v3 4/6] dt-bindings: remoteproc: Add PDC reset binding for Q6V5 PIL Sibi Sankar
2018-08-29 19:12 ` [PATCH v3 5/6] remoteproc: qcom: q6v5-pil: Explicitly get mss_restart line Sibi Sankar
2018-08-29 19:12 ` [PATCH v3 6/6] remoteproc: qcom: q6v5-pil: Add PDC reset for modem on SDM845 SoCs Sibi Sankar
2018-09-03 19:36 ` [PATCH v3 0/6] Add support for PDC Global " Bjorn Andersson
2018-10-04 18:27   ` Sibi Sankar
2018-10-05  8:46     ` Philipp Zabel
2018-10-05 18:48       ` Bjorn Andersson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180829191215.10071-2-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mka@chromium.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox