From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/4] ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+
Date: Thu, 30 Aug 2018 21:54:03 +0300 [thread overview]
Message-ID: <20180830185404.7224-4-digetx@gmail.com> (raw)
In-Reply-To: <20180830185404.7224-1-digetx@gmail.com>
The external memory arbitration configuration is getting reset after
memory entering into self-refresh mode, it shall be restored on the
exit. Note that MC_EMEM_ARB_CFG register is shadowed and latching
happens on the EMC timing update. This fixes 2x GPU performance
degradation after resuming from LP1 on Tegra30.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/mach-tegra/iomap.h | 9 +++++++++
arch/arm/mach-tegra/sleep-tegra30.S | 21 +++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 9e5b2f869fc8..9bc291e76887 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -79,15 +79,24 @@
#define TEGRA_PMC_BASE 0x7000E400
#define TEGRA_PMC_SIZE SZ_256
+#define TEGRA_MC_BASE 0x7000F000
+#define TEGRA_MC_SIZE SZ_1K
+
#define TEGRA_EMC_BASE 0x7000F400
#define TEGRA_EMC_SIZE SZ_1K
+#define TEGRA114_MC_BASE 0x70019000
+#define TEGRA114_MC_SIZE SZ_4K
+
#define TEGRA_EMC0_BASE 0x7001A000
#define TEGRA_EMC0_SIZE SZ_2K
#define TEGRA_EMC1_BASE 0x7001A800
#define TEGRA_EMC1_SIZE SZ_2K
+#define TEGRA124_MC_BASE 0x70019000
+#define TEGRA124_MC_SIZE SZ_4K
+
#define TEGRA124_EMC_BASE 0x7001B000
#define TEGRA124_EMC_SIZE SZ_2K
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 99ac9c6dcf7c..828f6c37afde 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -44,6 +44,8 @@
#define EMC_XM2VTTGENPADCTRL 0x310
#define EMC_XM2VTTGENPADCTRL2 0x314
+#define MC_EMEM_ARB_CFG 0x90
+
#define PMC_CTRL 0x0
#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
@@ -418,6 +420,22 @@ _pll_m_c_x_done:
movweq r0, #:lower16:TEGRA124_EMC_BASE
movteq r0, #:upper16:TEGRA124_EMC_BASE
+ cmp r10, #TEGRA30
+ moveq r2, #0x20
+ movweq r4, #:lower16:TEGRA_MC_BASE
+ movteq r4, #:upper16:TEGRA_MC_BASE
+ cmp r10, #TEGRA114
+ moveq r2, #0x34
+ movweq r4, #:lower16:TEGRA114_MC_BASE
+ movteq r4, #:upper16:TEGRA114_MC_BASE
+ cmp r10, #TEGRA124
+ moveq r2, #0x20
+ movweq r4, #:lower16:TEGRA124_MC_BASE
+ movteq r4, #:upper16:TEGRA124_MC_BASE
+
+ ldr r1, [r5, r2] @ restore MC_EMEM_ARB_CFG
+ str r1, [r4, #MC_EMEM_ARB_CFG]
+
exit_self_refresh:
ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
str r1, [r0, #EMC_XM2VTTGENPADCTRL]
@@ -546,6 +564,7 @@ tegra30_sdram_pad_address:
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+ .word TEGRA_MC_BASE + MC_EMEM_ARB_CFG @0x20
tegra30_sdram_pad_address_end:
tegra114_sdram_pad_address:
@@ -562,6 +581,7 @@ tegra114_sdram_pad_address:
.word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
+ .word TEGRA114_MC_BASE + MC_EMEM_ARB_CFG @0x34
tegra114_sdram_pad_adress_end:
tegra124_sdram_pad_address:
@@ -573,6 +593,7 @@ tegra124_sdram_pad_address:
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+ .word TEGRA124_MC_BASE + MC_EMEM_ARB_CFG @0x20
tegra124_sdram_pad_address_end:
tegra30_sdram_pad_size:
--
2.18.0
next prev parent reply other threads:[~2018-08-30 18:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 18:54 [PATCH v1 0/4] EMC fixes for Tegra30+ Dmitry Osipenko
2018-08-30 18:54 ` [PATCH v1 1/4] ARM: tegra: Fix missed EMC registers latching on resume from LP1 on Tegra30+ Dmitry Osipenko
2018-11-19 21:27 ` Jon Hunter
2018-11-19 21:51 ` Jon Hunter
2018-08-30 18:54 ` [PATCH v1 2/4] ARM: tegra: Fix DRAM refresh-interval clobbering on resume from LP1 on Tegra30 Dmitry Osipenko
2018-11-19 21:34 ` Jon Hunter
2018-11-19 22:09 ` Dmitry Osipenko
2018-11-19 22:32 ` Dmitry Osipenko
2018-11-20 10:26 ` Jon Hunter
2018-11-20 11:22 ` Dmitry Osipenko
2018-11-20 10:25 ` Jon Hunter
2018-11-20 10:27 ` Jon Hunter
2018-08-30 18:54 ` Dmitry Osipenko [this message]
2018-11-19 21:51 ` [PATCH v1 3/4] ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+ Jon Hunter
2018-08-30 18:54 ` [PATCH v1 4/4] ARM: tegra: Clear EMC interrupts " Dmitry Osipenko
2018-11-19 22:00 ` Jon Hunter
2018-11-19 22:35 ` Dmitry Osipenko
2018-11-20 10:27 ` Jon Hunter
2018-11-20 11:32 ` Dmitry Osipenko
2018-10-15 12:34 ` [PATCH v1 0/4] EMC fixes for Tegra30+ Dmitry Osipenko
2018-11-18 22:06 ` Dmitry Osipenko
2018-11-19 15:42 ` Jon Hunter
2018-11-19 17:05 ` Dmitry Osipenko
2018-11-19 21:26 ` Jon Hunter
2018-11-19 22:48 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180830185404.7224-4-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pdeschrijver@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).