From: Marcel Ziswiler <marcel@ziswiler.com>
To: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v2 05/34] ARM: tegra: apalis_t30: annotate/clean-up pcie controller/port nodes
Date: Fri, 31 Aug 2018 18:37:47 +0200 [thread overview]
Message-ID: <20180831163817.23970-6-marcel@ziswiler.com> (raw)
In-Reply-To: <20180831163817.23970-1-marcel@ziswiler.com>
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Annotate PCIe port nodes and clean-up PCIe controller/port status' with
respect to carrier board vs. module level device trees. As port 3
connects to the on-module Gigabit Ethernet MACPHY it is always enabled
together with the PCIe controller itself.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v2:
- Clean-up PCIe controller/port status' as well.
arch/arm/boot/dts/tegra30-apalis-eval.dts | 6 ------
arch/arm/boot/dts/tegra30-apalis.dtsi | 5 +++++
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 0dc85a20bd45..e3c70e7d8d37 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -23,8 +23,6 @@
};
pcie@3000 {
- status = "okay";
-
pci@1,0 {
status = "okay";
};
@@ -32,10 +30,6 @@
pci@2,0 {
status = "okay";
};
-
- pci@3,0 {
- status = "okay";
- };
};
host1x@50000000 {
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index fc279a073ac5..c810c044025a 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -15,6 +15,7 @@
};
pcie@3000 {
+ status = "okay";
avdd-pexa-supply = <&vdd2_reg>;
avdd-pexb-supply = <&vdd2_reg>;
avdd-pex-pll-supply = <&vdd2_reg>;
@@ -24,15 +25,19 @@
vdd-pexa-supply = <&vdd2_reg>;
vdd-pexb-supply = <&vdd2_reg>;
+ /* Apalis type specific */
pci@1,0 {
nvidia,num-lanes = <4>;
};
+ /* Apalis PCIe */
pci@2,0 {
nvidia,num-lanes = <1>;
};
+ /* I210/I211 Gigabit Ethernet Controller (on-module) */
pci@3,0 {
+ status = "okay";
nvidia,num-lanes = <1>;
pcie@0 {
reg = <0 0 0 0 0>;
--
2.14.4
next prev parent reply other threads:[~2018-08-31 16:38 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-31 16:37 [PATCH v2 00/34] ARM: dts: tegra: apalis_t30: major revamp incl. v1.1 hardware support Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 01/34] ARM: tegra: apalis_t30: fix mmc1 cmd pull-up Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 02/34] ARM: tegra: apalis_t30: pull-up sd card detect pins Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 03/34] ARM: tegra: apalis_t30: add local-mac-address property Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 04/34] ARM: tegra: apalis_t30: reorder pcie properties Marcel Ziswiler
2018-08-31 16:37 ` Marcel Ziswiler [this message]
2018-08-31 16:37 ` [PATCH v2 06/34] ARM: tegra: apalis_t30: reorder host1x/hdmi properties Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 07/34] ARM: tegra: apalis_t30: regulator clean-up Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 08/34] ARM: tegra: apalis_t30: add missing regulators Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 09/34] ARM: tegra: apalis_t30: annotate uarts and move compatible to board Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 10/34] ARM: tegra: apalis_t30: drop unused cami2c label Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 11/34] ARM: tegra: apalis_t30: white-space/newline clean-up Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 12/34] ARM: tegra: apalis_t30: drop unused mmc1/sd1 labels Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 13/34] ARM: tegra: apalis_t30: annotate mmc1/sd1 Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 14/34] ARM: tegra: apalis_t30: move dr_mode property from phy to controller Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 15/34] ARM: tegra: apalis_t30: reorder backlight properties Marcel Ziswiler
2018-09-03 9:22 ` Daniel Thompson
2018-09-03 11:50 ` Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 16/34] ARM: tegra: apalis_t30: drop pwmleds Marcel Ziswiler
2018-08-31 16:37 ` [PATCH v2 17/34] ARM: tegra: apalis_t30: pinmux clean-up Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 18/34] ARM: tegra: apalis_t30: add missing pinmux Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 19/34] ARM: tegra: apalis_t30: use proper irq-gpio for stmpe811 Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 20/34] ARM: tegra: apalis_t30: further lm95245 temperature sensor annotation Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 21/34] ARM: tegra: apalis_t30: add i2c-thermtrip Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 22/34] ARM: tegra: apalis_t30: add proper emmc vmmc and vqmmc supplies Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 23/34] ARM: tegra: apalis_t30: enable emmc ddr52 mode Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 24/34] ARM: tegra: apalis_t30: get rid of fake clocks simple bus Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 25/34] ARM: tegra: apalis_t30: line break long compatible property line Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 26/34] dt-bindings: add broadcom (formerly plx technology) vendor prefix Marcel Ziswiler
2018-08-31 18:01 ` Andreas Färber
2018-09-25 18:24 ` Rob Herring
2018-08-31 16:38 ` [PATCH v2 27/34] ARM: tegra: apalis_t30: drop module level model and compatible Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 28/34] ARM: tegra: apalis_t30: drop obsolete spidev nodes Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 29/34] ARM: tegra: apalis_t30: hog group for pcie switch reset gpio Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 30/34] ARM: tegra: apalis_t30: rename hdmiddc to hdmi_ddc Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 31/34] ARM: tegra: apalis_t30: rename tps65911@2d, stmpe811@41 and tps62362@60 Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 32/34] ARM: tegra: apalis_t30: fix mcp2515 can controller interrupt polarity Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 33/34] ARM: tegra: apalis_t30: move hda node from carrier to module Marcel Ziswiler
2018-08-31 16:38 ` [PATCH v2 34/34] ARM: tegra: apalis_t30: support v1.1 hardware revision Marcel Ziswiler
2018-09-25 18:32 ` Rob Herring
2018-09-26 14:46 ` [PATCH v2 00/34] ARM: dts: tegra: apalis_t30: major revamp incl. v1.1 hardware support Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831163817.23970-6-marcel@ziswiler.com \
--to=marcel@ziswiler.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).