linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>,
	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>,
	Peter Korsgaard <peter.korsgaard@barco.com>,
	Peter Rosin <peda@axentia.se>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Dominik Brodowski <linux@dominikbrodowski.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Michael Hennerich <Michael.Hennerich@analog.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Jiri Slaby <jslaby@suse.com>, Willy Tarreau <w@1wt.eu>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-mmc@vger.kernel.org, netdev@vger.kernel.org,
	linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-serial@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Janusz Krzysztofik <jmkrzyszt@gmail.com>
Subject: [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
Date: Sat,  1 Sep 2018 00:56:13 +0200	[thread overview]
Message-ID: <20180831225616.29221-2-jmkrzyszt@gmail.com> (raw)
In-Reply-To: <20180831225616.29221-1-jmkrzyszt@gmail.com>

Most users of get/set array functions iterate consecutive bits of data,
usually a single integer, while processing array of results obtained
from, or building an array of values to be passed to those functions.
Save time wasted on those iterations by changing the functions' API to
accept bitmaps.

All current users are updated as well.

More benefits from the change are expected as soon as planned support
for accepting/passing those bitmaps directly from/to respective GPIO
chip callbacks if applicable is implemented.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 Documentation/driver-api/gpio/consumer.rst  | 22 ++++----
 drivers/auxdisplay/hd44780.c                | 62 ++++++++-------------
 drivers/bus/ts-nbus.c                       | 21 ++-----
 drivers/gpio/gpio-max3191x.c                | 17 +++---
 drivers/gpio/gpiolib.c                      | 86 +++++++++++++++--------------
 drivers/gpio/gpiolib.h                      |  4 +-
 drivers/i2c/muxes/i2c-mux-gpio.c            | 14 ++---
 drivers/mmc/core/pwrseq_simple.c            | 13 ++---
 drivers/mux/gpio.c                          | 15 ++---
 drivers/net/phy/mdio-mux-gpio.c             | 11 ++--
 drivers/pcmcia/soc_common.c                 | 11 ++--
 drivers/phy/motorola/phy-mapphone-mdm6600.c | 17 +++---
 drivers/staging/iio/adc/ad7606.c            |  9 +--
 drivers/tty/serial/serial_mctrl_gpio.c      |  7 ++-
 include/linux/gpio/consumer.h               | 18 +++---
 15 files changed, 145 insertions(+), 182 deletions(-)

diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index aa03f389d41d..ed68042ddccf 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -323,29 +323,29 @@ The following functions get or set the values of an array of GPIOs::
 
 	int gpiod_get_array_value(unsigned int array_size,
 				  struct gpio_desc **desc_array,
-				  int *value_array);
+				  unsigned long *value_bitmap);
 	int gpiod_get_raw_array_value(unsigned int array_size,
 				      struct gpio_desc **desc_array,
-				      int *value_array);
+				      unsigned long *value_bitmap);
 	int gpiod_get_array_value_cansleep(unsigned int array_size,
 					   struct gpio_desc **desc_array,
-					   int *value_array);
+					   unsigned long *value_bitmap);
 	int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
 					   struct gpio_desc **desc_array,
-					   int *value_array);
+					   unsigned long *value_bitmap);
 
 	void gpiod_set_array_value(unsigned int array_size,
 				   struct gpio_desc **desc_array,
-				   int *value_array)
+				   unsigned long *value_bitmap)
 	void gpiod_set_raw_array_value(unsigned int array_size,
 				       struct gpio_desc **desc_array,
-				       int *value_array)
+				       unsigned long *value_bitmap)
 	void gpiod_set_array_value_cansleep(unsigned int array_size,
 					    struct gpio_desc **desc_array,
-					    int *value_array)
+					    unsigned long *value_bitmap)
 	void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 						struct gpio_desc **desc_array,
-						int *value_array)
+						unsigned long *value_bitmap)
 
 The array can be an arbitrary set of GPIOs. The functions will try to access
 GPIOs belonging to the same bank or chip simultaneously if supported by the
@@ -356,8 +356,8 @@ accessed sequentially.
 The functions take three arguments:
 	* array_size	- the number of array elements
 	* desc_array	- an array of GPIO descriptors
-	* value_array	- an array to store the GPIOs' values (get) or
-			  an array of values to assign to the GPIOs (set)
+	* value_bitmap	- a bitmap to store the GPIOs' values (get) or
+			  a bitmap of values to assign to the GPIOs (set)
 
 The descriptor array can be obtained using the gpiod_get_array() function
 or one of its variants. If the group of descriptors returned by that function
@@ -366,7 +366,7 @@ the struct gpio_descs returned by gpiod_get_array()::
 
 	struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
 	gpiod_set_array_value(my_gpio_descs->ndescs, my_gpio_descs->desc,
-			      my_gpio_values);
+			      my_gpio_value_bitmap);
 
 It is also possible to access a completely arbitrary array of descriptors. The
 descriptors may be obtained using any combination of gpiod_get() and
diff --git a/drivers/auxdisplay/hd44780.c b/drivers/auxdisplay/hd44780.c
index f1a42f0f1ded..7ee4f9a65bfc 100644
--- a/drivers/auxdisplay/hd44780.c
+++ b/drivers/auxdisplay/hd44780.c
@@ -62,20 +62,15 @@ static void hd44780_strobe_gpio(struct hd44780 *hd)
 /* write to an LCD panel register in 8 bit GPIO mode */
 static void hd44780_write_gpio8(struct hd44780 *hd, u8 val, unsigned int rs)
 {
-	int values[10];	/* for DATA[0-7], RS, RW */
-	unsigned int i, n;
-
-	for (i = 0; i < 8; i++)
-		values[PIN_DATA0 + i] = !!(val & BIT(i));
-	values[PIN_CTRL_RS] = rs;
-	n = 9;
-	if (hd->pins[PIN_CTRL_RW]) {
-		values[PIN_CTRL_RW] = 0;
-		n++;
-	}
+	DECLARE_BITMAP(value_bitmap, 10);	/* for DATA[0-7], RS, RW */
+	unsigned int n;
+
+	*value_bitmap = val;
+	__assign_bit(8, value_bitmap, rs);
+	n = hd->pins[PIN_CTRL_RW] ? 10 : 9;
 
 	/* Present the data to the port */
-	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA0], values);
+	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA0], value_bitmap);
 
 	hd44780_strobe_gpio(hd);
 }
@@ -83,32 +78,25 @@ static void hd44780_write_gpio8(struct hd44780 *hd, u8 val, unsigned int rs)
 /* write to an LCD panel register in 4 bit GPIO mode */
 static void hd44780_write_gpio4(struct hd44780 *hd, u8 val, unsigned int rs)
 {
-	int values[10];	/* for DATA[0-7], RS, RW, but DATA[0-3] is unused */
-	unsigned int i, n;
+	DECLARE_BITMAP(value_bitmap, 6);	/* for DATA[4-7], RS, RW */
+	unsigned int n;
 
 	/* High nibble + RS, RW */
-	for (i = 4; i < 8; i++)
-		values[PIN_DATA0 + i] = !!(val & BIT(i));
-	values[PIN_CTRL_RS] = rs;
-	n = 5;
-	if (hd->pins[PIN_CTRL_RW]) {
-		values[PIN_CTRL_RW] = 0;
-		n++;
-	}
+	*value_bitmap = val >> 4;
+	__assign_bit(4, value_bitmap, rs);
+	n = hd->pins[PIN_CTRL_RW] ? 6 : 5;
 
 	/* Present the data to the port */
-	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4],
-				       &values[PIN_DATA4]);
+	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], value_bitmap);
 
 	hd44780_strobe_gpio(hd);
 
 	/* Low nibble */
-	for (i = 0; i < 4; i++)
-		values[PIN_DATA4 + i] = !!(val & BIT(i));
+	*value_bitmap &= ~0x0f;
+	*value_bitmap |= val & 0x0f;
 
 	/* Present the data to the port */
-	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4],
-				       &values[PIN_DATA4]);
+	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], value_bitmap);
 
 	hd44780_strobe_gpio(hd);
 }
@@ -155,23 +143,17 @@ static void hd44780_write_cmd_gpio4(struct charlcd *lcd, int cmd)
 /* Send 4-bits of a command to the LCD panel in raw 4 bit GPIO mode */
 static void hd44780_write_cmd_raw_gpio4(struct charlcd *lcd, int cmd)
 {
-	int values[10];	/* for DATA[0-7], RS, RW, but DATA[0-3] is unused */
+	/* for DATA[0-7], RS, RW, but DATA[0-3] is unused */
+	DECLARE_BITMAP(value_bitmap, 6);
 	struct hd44780 *hd = lcd->drvdata;
-	unsigned int i, n;
+	unsigned int n;
 
 	/* Command nibble + RS, RW */
-	for (i = 0; i < 4; i++)
-		values[PIN_DATA4 + i] = !!(cmd & BIT(i));
-	values[PIN_CTRL_RS] = 0;
-	n = 5;
-	if (hd->pins[PIN_CTRL_RW]) {
-		values[PIN_CTRL_RW] = 0;
-		n++;
-	}
+	*value_bitmap = cmd & 0x0f;
+	n = hd->pins[PIN_CTRL_RW] ? 6 : 5;
 
 	/* Present the data to the port */
-	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4],
-				       &values[PIN_DATA4]);
+	gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], value_bitmap);
 
 	hd44780_strobe_gpio(hd);
 }
diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 073fd9011154..2ac5239df865 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -110,13 +110,11 @@ static void ts_nbus_set_direction(struct ts_nbus *ts_nbus, int direction)
  */
 static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
 {
-	int i;
-	int values[8];
-
-	for (i = 0; i < 8; i++)
-		values[i] = 0;
+	DECLARE_BITMAP(value_bitmap, 8);
+	
+	*value_bitmap = 0;
 
-	gpiod_set_array_value_cansleep(8, ts_nbus->data->desc, values);
+	gpiod_set_array_value_cansleep(8, ts_nbus->data->desc, value_bitmap);
 	gpiod_set_value_cansleep(ts_nbus->csn, 0);
 	gpiod_set_value_cansleep(ts_nbus->strobe, 0);
 	gpiod_set_value_cansleep(ts_nbus->ale, 0);
@@ -157,16 +155,9 @@ static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
 static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
 {
 	struct gpio_descs *gpios = ts_nbus->data;
-	int i;
-	int values[8];
-
-	for (i = 0; i < 8; i++)
-		if (byte & BIT(i))
-			values[i] = 1;
-		else
-			values[i] = 0;
+	DECLARE_BITMAP(value_bitmap, 8) = { byte, };
 
-	gpiod_set_array_value_cansleep(8, gpios->desc, values);
+	gpiod_set_array_value_cansleep(8, gpios->desc, value_bitmap);
 }
 
 /*
diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c
index b5b9cb1fda50..c4ec1c82af27 100644
--- a/drivers/gpio/gpio-max3191x.c
+++ b/drivers/gpio/gpio-max3191x.c
@@ -315,17 +315,20 @@ static void gpiod_set_array_single_value_cansleep(unsigned int ndescs,
 						  struct gpio_desc **desc,
 						  int value)
 {
-	int i, *values;
+	unsigned long *value_bitmap;
 
-	values = kmalloc_array(ndescs, sizeof(*values), GFP_KERNEL);
-	if (!values)
+	value_bitmap = kmalloc_array(BITS_TO_LONGS(ndescs),
+				     sizeof(*value_bitmap), GFP_KERNEL);
+	if (!value_bitmap)
 		return;
 
-	for (i = 0; i < ndescs; i++)
-		values[i] = value;
+	if (value)
+		bitmap_fill(value_bitmap, ndescs);
+	else
+		bitmap_zero(value_bitmap, ndescs);
 
-	gpiod_set_array_value_cansleep(ndescs, desc, values);
-	kfree(values);
+	gpiod_set_array_value_cansleep(ndescs, desc, value_bitmap);
+	kfree(value_bitmap);
 }
 
 static struct gpio_descs *devm_gpiod_get_array_optional_count(
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e8f8a1999393..f0e9ffa8cab6 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -427,7 +427,7 @@ static long linehandle_ioctl(struct file *filep, unsigned int cmd,
 	struct linehandle_state *lh = filep->private_data;
 	void __user *ip = (void __user *)arg;
 	struct gpiohandle_data ghd;
-	int vals[GPIOHANDLES_MAX];
+	unsigned long value_bitmap[BITS_TO_LONGS(GPIOHANDLES_MAX)];
 	int i;
 
 	if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
@@ -436,13 +436,13 @@ static long linehandle_ioctl(struct file *filep, unsigned int cmd,
 							true,
 							lh->numdescs,
 							lh->descs,
-							vals);
+							value_bitmap);
 		if (ret)
 			return ret;
 
 		memset(&ghd, 0, sizeof(ghd));
 		for (i = 0; i < lh->numdescs; i++)
-			ghd.values[i] = vals[i];
+			ghd.values[i] = test_bit(i, value_bitmap);
 
 		if (copy_to_user(ip, &ghd, sizeof(ghd)))
 			return -EFAULT;
@@ -461,14 +461,14 @@ static long linehandle_ioctl(struct file *filep, unsigned int cmd,
 
 		/* Clamp all values to [0,1] */
 		for (i = 0; i < lh->numdescs; i++)
-			vals[i] = !!ghd.values[i];
+			__assign_bit(i, value_bitmap, !!ghd.values[i]);
 
 		/* Reuse the array setting function */
 		return gpiod_set_array_value_complex(false,
 					      true,
 					      lh->numdescs,
 					      lh->descs,
-					      vals);
+					      value_bitmap);
 	}
 	return -EINVAL;
 }
@@ -2784,7 +2784,7 @@ static int gpio_chip_get_multiple(struct gpio_chip *chip,
 int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 				  unsigned int array_size,
 				  struct gpio_desc **desc_array,
-				  int *value_array)
+				  unsigned long *value_bitmap)
 {
 	int i = 0;
 
@@ -2835,7 +2835,7 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 
 			if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 				value = !value;
-			value_array[j] = value;
+			__assign_bit(j, value_bitmap, value);
 			trace_gpio_value(desc_to_gpio(desc), 1, value);
 		}
 
@@ -2895,9 +2895,9 @@ EXPORT_SYMBOL_GPL(gpiod_get_value);
 
 /**
  * gpiod_get_raw_array_value() - read raw values from an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be read
- * @value_array: array to store the read values
+ * @value_bitmap: bitmap to store the read values
  *
  * Read the raw values of the GPIOs, i.e. the values of the physical lines
  * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
@@ -2907,20 +2907,21 @@ EXPORT_SYMBOL_GPL(gpiod_get_value);
  * and it will complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_get_raw_array_value(unsigned int array_size,
-			      struct gpio_desc **desc_array, int *value_array)
+			      struct gpio_desc **desc_array,
+			      unsigned long *value_bitmap)
 {
 	if (!desc_array)
 		return -EINVAL;
 	return gpiod_get_array_value_complex(true, false, array_size,
-					     desc_array, value_array);
+					     desc_array, value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
 
 /**
  * gpiod_get_array_value() - read values from an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be read
- * @value_array: array to store the read values
+ * @value_bitnap: bitmap to store the read values
  *
  * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
  * into account.  Return 0 in case of success, else an error code.
@@ -2929,12 +2930,13 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
  * and it will complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_get_array_value(unsigned int array_size,
-			  struct gpio_desc **desc_array, int *value_array)
+			  struct gpio_desc **desc_array,
+			  unsigned long *value_bitmap)
 {
 	if (!desc_array)
 		return -EINVAL;
 	return gpiod_get_array_value_complex(false, false, array_size,
-					     desc_array, value_array);
+					     desc_array, value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_get_array_value);
 
@@ -3027,7 +3029,7 @@ static void gpio_chip_set_multiple(struct gpio_chip *chip,
 int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 				   unsigned int array_size,
 				   struct gpio_desc **desc_array,
-				   int *value_array)
+				   unsigned long *value_bitmap)
 {
 	int i = 0;
 
@@ -3056,7 +3058,7 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 		do {
 			struct gpio_desc *desc = desc_array[i];
 			int hwgpio = gpio_chip_hwgpio(desc);
-			int value = value_array[i];
+			int value = test_bit(i, value_bitmap);
 
 			if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 				value = !value;
@@ -3152,9 +3154,9 @@ EXPORT_SYMBOL_GPL(gpiod_set_value);
 
 /**
  * gpiod_set_raw_array_value() - assign values to an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be assigned
- * @value_array: array of values to assign
+ * @value_bitmap: bitmap of values to assign
  *
  * Set the raw values of the GPIOs, i.e. the values of the physical lines
  * without regard for their ACTIVE_LOW status.
@@ -3163,20 +3165,21 @@ EXPORT_SYMBOL_GPL(gpiod_set_value);
  * complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_set_raw_array_value(unsigned int array_size,
-			 struct gpio_desc **desc_array, int *value_array)
+			 struct gpio_desc **desc_array,
+			 unsigned long *value_bitmap)
 {
 	if (!desc_array)
 		return -EINVAL;
 	return gpiod_set_array_value_complex(true, false, array_size,
-					desc_array, value_array);
+					desc_array, value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
 
 /**
  * gpiod_set_array_value() - assign values to an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be assigned
- * @value_array: array of values to assign
+ * @value_bitmap: bitmap of values to assign
  *
  * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
  * into account.
@@ -3185,12 +3188,13 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
  * complain if the GPIO chip functions potentially sleep.
  */
 void gpiod_set_array_value(unsigned int array_size,
-			   struct gpio_desc **desc_array, int *value_array)
+			   struct gpio_desc **desc_array,
+			   unsigned long *value_bitmap)
 {
 	if (!desc_array)
 		return;
 	gpiod_set_array_value_complex(false, false, array_size, desc_array,
-				      value_array);
+				      value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_set_array_value);
 
@@ -3410,9 +3414,9 @@ EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
 
 /**
  * gpiod_get_raw_array_value_cansleep() - read raw values from an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be read
- * @value_array: array to store the read values
+ * @value_bitmap: bitmap to store the read values
  *
  * Read the raw values of the GPIOs, i.e. the values of the physical lines
  * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
@@ -3422,21 +3426,21 @@ EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
  */
 int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
 				       struct gpio_desc **desc_array,
-				       int *value_array)
+				       unsigned long *value_bitmap)
 {
 	might_sleep_if(extra_checks);
 	if (!desc_array)
 		return -EINVAL;
 	return gpiod_get_array_value_complex(true, true, array_size,
-					     desc_array, value_array);
+					     desc_array, value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value_cansleep);
 
 /**
  * gpiod_get_array_value_cansleep() - read values from an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be read
- * @value_array: array to store the read values
+ * @value_bitmap: bitmap to store the read values
  *
  * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
  * into account.  Return 0 in case of success, else an error code.
@@ -3445,13 +3449,13 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value_cansleep);
  */
 int gpiod_get_array_value_cansleep(unsigned int array_size,
 				   struct gpio_desc **desc_array,
-				   int *value_array)
+				   unsigned long *value_bitmap)
 {
 	might_sleep_if(extra_checks);
 	if (!desc_array)
 		return -EINVAL;
 	return gpiod_get_array_value_complex(false, true, array_size,
-					     desc_array, value_array);
+					     desc_array, value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_get_array_value_cansleep);
 
@@ -3493,9 +3497,9 @@ EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
 
 /**
  * gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be assigned
- * @value_array: array of values to assign
+ * @value_bitmap: bitmap of values to assign
  *
  * Set the raw values of the GPIOs, i.e. the values of the physical lines
  * without regard for their ACTIVE_LOW status.
@@ -3504,13 +3508,13 @@ EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
  */
 int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 					struct gpio_desc **desc_array,
-					int *value_array)
+					unsigned long *value_bitmap)
 {
 	might_sleep_if(extra_checks);
 	if (!desc_array)
 		return -EINVAL;
 	return gpiod_set_array_value_complex(true, true, array_size, desc_array,
-				      value_array);
+				      value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep);
 
@@ -3533,9 +3537,9 @@ void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n)
 
 /**
  * gpiod_set_array_value_cansleep() - assign values to an array of GPIOs
- * @array_size: number of elements in the descriptor / value arrays
+ * @array_size: number of elements in the descriptor array / value bitmap
  * @desc_array: array of GPIO descriptors whose values will be assigned
- * @value_array: array of values to assign
+ * @value_bitmap: bitmap of values to assign
  *
  * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
  * into account.
@@ -3544,13 +3548,13 @@ void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n)
  */
 void gpiod_set_array_value_cansleep(unsigned int array_size,
 				    struct gpio_desc **desc_array,
-				    int *value_array)
+				    unsigned long *value_bitmap)
 {
 	might_sleep_if(extra_checks);
 	if (!desc_array)
 		return;
 	gpiod_set_array_value_complex(false, true, array_size, desc_array,
-				      value_array);
+				      value_bitmap);
 }
 EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
 
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index a7e49fef73d4..11e83d2eef89 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -187,11 +187,11 @@ struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip, u16 hwnum);
 int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 				  unsigned int array_size,
 				  struct gpio_desc **desc_array,
-				  int *value_array);
+				  unsigned long *value_bitmap);
 int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 				   unsigned int array_size,
 				   struct gpio_desc **desc_array,
-				   int *value_array);
+				   unsigned long *value_bitmap);
 
 /* This is just passed between gpiolib and devres */
 struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 401308e3d036..e28ddc20000d 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -22,18 +22,16 @@ struct gpiomux {
 	struct i2c_mux_gpio_platform_data data;
 	unsigned gpio_base;
 	struct gpio_desc **gpios;
-	int *values;
 };
 
 static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
 {
-	int i;
-
-	for (i = 0; i < mux->data.n_gpios; i++)
-		mux->values[i] = (val >> i) & 1;
+	DECLARE_BITMAP(value_bitmap, mux->data.n_gpios);
+	
+	*value_bitmap = val;
 
 	gpiod_set_array_value_cansleep(mux->data.n_gpios,
-				       mux->gpios, mux->values);
+				       mux->gpios, value_bitmap);
 }
 
 static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
@@ -182,15 +180,13 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 
 	muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values,
-			     mux->data.n_gpios * sizeof(*mux->gpios) +
-			     mux->data.n_gpios * sizeof(*mux->values), 0,
+			     mux->data.n_gpios * sizeof(*mux->gpios), 0,
 			     i2c_mux_gpio_select, NULL);
 	if (!muxc) {
 		ret = -ENOMEM;
 		goto alloc_failed;
 	}
 	mux->gpios = muxc->priv;
-	mux->values = (int *)(mux->gpios + mux->data.n_gpios);
 	muxc->priv = mux;
 
 	platform_set_drvdata(pdev, muxc);
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index a8b9fee4d62a..fd7791e072b3 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -40,18 +40,13 @@ static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
 	struct gpio_descs *reset_gpios = pwrseq->reset_gpios;
 
 	if (!IS_ERR(reset_gpios)) {
-		int i, *values;
 		int nvalues = reset_gpios->ndescs;
+		DECLARE_BITMAP(value_bitmap, nvalues);
 
-		values = kmalloc_array(nvalues, sizeof(int), GFP_KERNEL);
-		if (!values)
-			return;
+		*value_bitmap = value;
 
-		for (i = 0; i < nvalues; i++)
-			values[i] = value;
-
-		gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc, values);
-		kfree(values);
+		gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
+					       value_bitmap);
 	}
 }
 
diff --git a/drivers/mux/gpio.c b/drivers/mux/gpio.c
index 6fdd9316db8b..17b7b1c21d90 100644
--- a/drivers/mux/gpio.c
+++ b/drivers/mux/gpio.c
@@ -17,20 +17,17 @@
 
 struct mux_gpio {
 	struct gpio_descs *gpios;
-	int *val;
 };
 
 static int mux_gpio_set(struct mux_control *mux, int state)
 {
 	struct mux_gpio *mux_gpio = mux_chip_priv(mux->chip);
-	int i;
-
-	for (i = 0; i < mux_gpio->gpios->ndescs; i++)
-		mux_gpio->val[i] = (state >> i) & 1;
+	DECLARE_BITMAP(value_bitmap, mux_gpio->gpios->ndescs);
+	
+	*value_bitmap = state;
 
 	gpiod_set_array_value_cansleep(mux_gpio->gpios->ndescs,
-				       mux_gpio->gpios->desc,
-				       mux_gpio->val);
+				       mux_gpio->gpios->desc, value_bitmap);
 
 	return 0;
 }
@@ -58,13 +55,11 @@ static int mux_gpio_probe(struct platform_device *pdev)
 	if (pins < 0)
 		return pins;
 
-	mux_chip = devm_mux_chip_alloc(dev, 1, sizeof(*mux_gpio) +
-				       pins * sizeof(*mux_gpio->val));
+	mux_chip = devm_mux_chip_alloc(dev, 1, sizeof(*mux_gpio));
 	if (IS_ERR(mux_chip))
 		return PTR_ERR(mux_chip);
 
 	mux_gpio = mux_chip_priv(mux_chip);
-	mux_gpio->val = (int *)(mux_gpio + 1);
 	mux_chip->ops = &mux_gpio_ops;
 
 	mux_gpio->gpios = devm_gpiod_get_array(dev, "mux", GPIOD_OUT_LOW);
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index bc90764a8b8d..3907e9528949 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -20,23 +20,21 @@
 struct mdio_mux_gpio_state {
 	struct gpio_descs *gpios;
 	void *mux_handle;
-	int values[];
 };
 
 static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
 				   void *data)
 {
 	struct mdio_mux_gpio_state *s = data;
-	unsigned int n;
+	DECLARE_BITMAP(value_bitmap, s->gpios->ndescs);
 
 	if (current_child == desired_child)
 		return 0;
 
-	for (n = 0; n < s->gpios->ndescs; n++)
-		s->values[n] = (desired_child >> n) & 1;
+	*value_bitmap = desired_child;
 
 	gpiod_set_array_value_cansleep(s->gpios->ndescs, s->gpios->desc,
-				       s->values);
+				       value_bitmap);
 
 	return 0;
 }
@@ -51,8 +49,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(gpios))
 		return PTR_ERR(gpios);
 
-	s = devm_kzalloc(&pdev->dev, struct_size(s, values, gpios->ndescs),
-			 GFP_KERNEL);
+	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
 	if (!s) {
 		gpiod_put_array(gpios);
 		return -ENOMEM;
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index c5f2344c189b..44288b1a57ee 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -351,19 +351,22 @@ static int soc_common_pcmcia_config_skt(
 
 	if (ret == 0) {
 		struct gpio_desc *descs[2];
-		int values[2], n = 0;
+		DECLARE_BITMAP(value_bitmap, 2);
+		int n = 0;
 
 		if (skt->gpio_reset) {
 			descs[n] = skt->gpio_reset;
-			values[n++] = !!(state->flags & SS_RESET);
+			__assign_bit(n++, value_bitmap,
+				     !!(state->flags & SS_RESET));
 		}
 		if (skt->gpio_bus_enable) {
 			descs[n] = skt->gpio_bus_enable;
-			values[n++] = !!(state->flags & SS_OUTPUT_ENA);
+			__assign_bit(n++, value_bitmap,
+				     !!(state->flags & SS_OUTPUT_ENA));
 		}
 
 		if (n)
-			gpiod_set_array_value_cansleep(n, descs, values);
+			gpiod_set_array_value_cansleep(n, descs, value_bitmap);
 
 		/*
 		 * This really needs a better solution.  The IRQ
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index 0075fb0bef8c..b348272f7f1a 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -157,15 +157,12 @@ static const struct phy_ops gpio_usb_ops = {
  */
 static void phy_mdm6600_cmd(struct phy_mdm6600 *ddata, int val)
 {
-	int values[PHY_MDM6600_NR_CMD_LINES];
-	int i;
+	DECLARE_BITMAP(value_bitmap, PHY_MDM6600_NR_CMD_LINES);
 
-	val &= (1 << PHY_MDM6600_NR_CMD_LINES) - 1;
-	for (i = 0; i < PHY_MDM6600_NR_CMD_LINES; i++)
-		values[i] = (val & BIT(i)) >> i;
+	*value_bitmap = val & ((1 << PHY_MDM6600_NR_CMD_LINES) - 1);
 
 	gpiod_set_array_value_cansleep(PHY_MDM6600_NR_CMD_LINES,
-				       ddata->cmd_gpios->desc, values);
+				       ddata->cmd_gpios->desc, value_bitmap);
 }
 
 /**
@@ -176,7 +173,7 @@ static void phy_mdm6600_status(struct work_struct *work)
 {
 	struct phy_mdm6600 *ddata;
 	struct device *dev;
-	int values[PHY_MDM6600_NR_STATUS_LINES];
+	DECLARE_BITMAP(value_bitmap, PHY_MDM6600_NR_STATUS_LINES);
 	int error, i, val = 0;
 
 	ddata = container_of(work, struct phy_mdm6600, status_work.work);
@@ -184,14 +181,14 @@ static void phy_mdm6600_status(struct work_struct *work)
 
 	error = gpiod_get_array_value_cansleep(PHY_MDM6600_NR_STATUS_LINES,
 					       ddata->status_gpios->desc,
-					       values);
+					       value_bitmap);
 	if (error)
 		return;
 
 	for (i = 0; i < PHY_MDM6600_NR_STATUS_LINES; i++) {
-		val |= values[i] << i;
+		val |= test_bit(i, value_bitmap) << i;
 		dev_dbg(ddata->dev, "XXX %s: i: %i values[i]: %i val: %i\n",
-			__func__, i, values[i], val);
+			__func__, i, test_bit(i, value_bitmap), val);
 	}
 	ddata->status = val;
 
diff --git a/drivers/staging/iio/adc/ad7606.c b/drivers/staging/iio/adc/ad7606.c
index 25b9fcd5e3a4..18b6d10b0176 100644
--- a/drivers/staging/iio/adc/ad7606.c
+++ b/drivers/staging/iio/adc/ad7606.c
@@ -202,7 +202,7 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct ad7606_state *st = iio_priv(indio_dev);
-	int values[3];
+	DECLARE_BITMAP(value_bitmap, 3);
 	int ret, i;
 
 	switch (mask) {
@@ -227,13 +227,10 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			return ret;
 
-		values[0] = (ret >> 0) & 1;
-		values[1] = (ret >> 1) & 1;
-		values[2] = (ret >> 2) & 1;
+		*value_bitmap = ret;
 
 		mutex_lock(&st->lock);
-		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
-				      values);
+		gpiod_set_array_value(3, st->gpio_os->desc, value_bitmap);
 		st->oversampling = val;
 		mutex_unlock(&st->lock);
 
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index 1c06325beaca..edfe8c688479 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -40,7 +40,7 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
 {
 	enum mctrl_gpio_idx i;
 	struct gpio_desc *desc_array[UART_GPIO_MAX];
-	int value_array[UART_GPIO_MAX];
+	DECLARE_BITMAP(value_bitmap, UART_GPIO_MAX);
 	unsigned int count = 0;
 
 	if (gpios == NULL)
@@ -49,10 +49,11 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
 	for (i = 0; i < UART_GPIO_MAX; i++)
 		if (gpios->gpio[i] && mctrl_gpios_desc[i].dir_out) {
 			desc_array[count] = gpios->gpio[i];
-			value_array[count] = !!(mctrl & mctrl_gpios_desc[i].mctrl);
+			__assign_bit(count, value_bitmap,
+				     !!(mctrl & mctrl_gpios_desc[i].mctrl));
 			count++;
 		}
-	gpiod_set_array_value(count, desc_array, value_array);
+	gpiod_set_array_value(count, desc_array, value_bitmap);
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_set);
 
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 21ddbe440030..1b21dc7b0fad 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -104,36 +104,38 @@ int gpiod_direction_output_raw(struct gpio_desc *desc, int value);
 /* Value get/set from non-sleeping context */
 int gpiod_get_value(const struct gpio_desc *desc);
 int gpiod_get_array_value(unsigned int array_size,
-			  struct gpio_desc **desc_array, int *value_array);
+			  struct gpio_desc **desc_array,
+			  unsigned long *value_bitmap);
 void gpiod_set_value(struct gpio_desc *desc, int value);
 void gpiod_set_array_value(unsigned int array_size,
-			   struct gpio_desc **desc_array, int *value_array);
+			   struct gpio_desc **desc_array,
+			   unsigned long *value_bitmap);
 int gpiod_get_raw_value(const struct gpio_desc *desc);
 int gpiod_get_raw_array_value(unsigned int array_size,
 			      struct gpio_desc **desc_array,
-			      int *value_array);
+			      unsigned long *value_bitmap);
 void gpiod_set_raw_value(struct gpio_desc *desc, int value);
 int gpiod_set_raw_array_value(unsigned int array_size,
 			       struct gpio_desc **desc_array,
-			       int *value_array);
+			       unsigned long *value_bitmap);
 
 /* Value get/set from sleeping context */
 int gpiod_get_value_cansleep(const struct gpio_desc *desc);
 int gpiod_get_array_value_cansleep(unsigned int array_size,
 				   struct gpio_desc **desc_array,
-				   int *value_array);
+				   unsigned long *value_bitmap);
 void gpiod_set_value_cansleep(struct gpio_desc *desc, int value);
 void gpiod_set_array_value_cansleep(unsigned int array_size,
 				    struct gpio_desc **desc_array,
-				    int *value_array);
+				    unsigned long *value_bitmap);
 int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc);
 int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
 				       struct gpio_desc **desc_array,
-				       int *value_array);
+				       unsigned long *value_bitmap);
 void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value);
 int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 					struct gpio_desc **desc_array,
-					int *value_array);
+					unsigned long *value_bitmap);
 
 int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
 int gpiod_set_transitory(struct gpio_desc *desc, bool transitory);
-- 
2.16.4


  reply	other threads:[~2018-08-31 22:55 UTC|newest]

Thread overview: 206+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18 23:57 [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 1/8] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-07-19  6:17   ` Boris Brezillon
2018-07-20 17:57     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 2/8] mtd: rawnand: ams-delta: Write protect device during probe Janusz Krzysztofik
2018-07-19  6:22   ` Boris Brezillon
2018-07-20 18:02     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-07-19  6:23   ` Boris Brezillon
2018-07-20 18:12     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 4/8] mtd: rawnand: ams-delta: Optimize pointer resolution on read/write Janusz Krzysztofik
2018-07-19  6:25   ` Boris Brezillon
2018-07-20 18:14     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 5/8] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-07-19  6:28   ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 6/8] gpio: omap: Add get/set_multiple() callbacks Janusz Krzysztofik
2018-07-29 20:29   ` Linus Walleij
2018-08-03  1:52     ` Grygorii Strashko
2018-08-03 16:47   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 7/8] mtd: rawnand: ams-delta: Check sanity of data GPIO resource Janusz Krzysztofik
2018-07-19  6:44   ` Boris Brezillon
2018-07-29 20:36     ` Linus Walleij
2018-07-29 21:16       ` Boris Brezillon
2018-07-29 20:33   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 8/8] mtd: rawnand: ams-delta: Use GPIO callbacks for data I/O Janusz Krzysztofik
2018-07-19  6:47   ` Boris Brezillon
2018-07-20 18:38     ` Janusz Krzysztofik
2018-07-20 19:48       ` Boris Brezillon
2018-07-19  6:15 ` [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors " Boris Brezillon
2018-07-20 17:55   ` Janusz Krzysztofik
2018-07-20 19:25     ` Boris Brezillon
2018-10-03 12:00   ` [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op() Janusz Krzysztofik
2018-10-03 12:30     ` Boris Brezillon
2018-10-03 13:55       ` Janusz Krzysztofik
2018-10-03 14:06         ` Boris Brezillon
2018-10-04 13:52           ` Janusz Krzysztofik
2018-10-04 13:59             ` Boris Brezillon
2018-10-04 14:11               ` Janusz Krzysztofik
2018-10-04 14:22                 ` Boris Brezillon
2018-10-12 20:41     ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Janusz Krzysztofik
2018-10-12 20:41       ` [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op() Janusz Krzysztofik
2018-10-13  6:05         ` Boris Brezillon
2018-10-13  5:55       ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Boris Brezillon
2018-10-15 19:41       ` [PATCH v3 1/3] " Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 2/3] mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/W Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 3/3] mtd: rawnand: ams-delta: Convert the driver to ->exec_op() Janusz Krzysztofik
2018-11-11 20:53         ` [PATCH v3 1/3] mtd: rawnand: Provide helper for polling GPIO R/B pin Miquel Raynal
2018-08-06 22:29 ` [RFC PATCH v2] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 01/12] mtd: rawnand: ams-delta: Assign mtd->dev.parent, not mtd->owner Janusz Krzysztofik
2018-08-06 23:54     ` Marek Vasut
2018-08-07 21:55       ` Janusz Krzysztofik
2018-08-07 16:57     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 02/12] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-10 10:10     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 04/12] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-07 17:00     ` Boris Brezillon
2018-08-10 10:11     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write Janusz Krzysztofik
2018-08-06 23:57     ` Marek Vasut
2018-08-07 17:06     ` Boris Brezillon
2018-08-07 17:11       ` Janusz Krzysztofik
2018-08-10 10:25     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 06/12] ARM: OMAP1: ams-delta: drop obsolete NAND resources Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-08-07 18:57     ` Boris Brezillon
2018-08-08 16:55       ` Janusz Krzysztofik
2018-08-08 17:42         ` Miquel Raynal
2018-08-06 22:29   ` [RFC PATCH v2 08/12] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-07 17:02     ` Boris Brezillon
2018-08-07 17:15       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 09/12] gpiolib: Identify GPIO descriptor arrays with direct mapping Janusz Krzysztofik
2018-08-06 23:29     ` Linus Walleij
2018-08-07 16:50       ` Janusz Krzysztofik
2018-08-07 17:10         ` Boris Brezillon
2018-08-07 17:14     ` Boris Brezillon
2018-08-07 17:19       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 10/12] gpiolib: Introduce bitmap get/set array API extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 11/12] mtd: rawnand: ams-delta: Use GPIO API bitmap extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 12/12] gpiolib: Add fast processing path to bitmap API functions Janusz Krzysztofik
2018-08-06 23:43     ` Linus Walleij
2018-08-07 17:29       ` Janusz Krzysztofik
2018-08-07 17:47         ` Boris Brezillon
2018-08-10 10:55           ` Linus Walleij
2018-08-13 22:34   ` [PATCH v3 0/7] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 1/7] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 2/7] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 4/7] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 5/7] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-16  7:30       ` Boris Brezillon
2018-08-13 22:34     ` [PATCH v3 6/7] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 7/7] mtd: rawnand: ams-delta: use GPIO API for data I/O Janusz Krzysztofik
2018-08-16  7:39       ` Boris Brezillon
2018-08-20 21:39     ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-24 12:57         ` Boris Brezillon
2018-09-05  6:47       ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-09-05 20:53         ` Janusz Krzysztofik
2018-09-07 16:45           ` Tony Lindgren
2018-09-19  8:46             ` Miquel Raynal
2018-09-19 22:52       ` [PATCH v5 " Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-09-23 11:35         ` [PATCH v5 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-08-20 23:43     ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-21  6:49         ` Peter Rosin
2018-08-21  6:52           ` Peter Rosin
2018-08-29 12:03         ` Miguel Ojeda
2018-08-29 18:01           ` Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-29  9:06       ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-08-29 18:16         ` Janusz Krzysztofik
2018-08-29 10:19       ` Ulf Hansson
2018-08-29 20:48       ` [PATH v5 " Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-30  4:30           ` Peter Rosin
2018-08-30  7:40           ` Geert Uytterhoeven
2018-08-30 11:10           ` Miguel Ojeda
2018-08-30 15:35             ` David Laight
2018-09-02 10:19             ` Janusz Krzysztofik
2018-08-31  9:14           ` Linus Walleij
2018-08-29 20:48         ` [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-29 20:49         ` [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-31 22:56         ` [PATH v6 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-31 22:56           ` Janusz Krzysztofik [this message]
2018-09-01  0:23             ` [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Peter Rosin
2018-09-04 15:28             ` kbuild test robot
2018-09-04 15:28             ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-31 22:56           ` [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-04 15:27             ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-02 12:01           ` [PATCH v7 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-02 13:21               ` Lukas Wunner
2018-09-03  4:31               ` Matthew Wilcox
2018-09-03 14:24                 ` Geert Uytterhoeven
2018-09-03 15:07               ` Geert Uytterhoeven
2018-09-04 15:29               ` kbuild test robot
2018-09-05  6:46               ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-03 14:21               ` Geert Uytterhoeven
2018-09-04 15:23               ` kbuild test robot
2018-09-05  7:11               ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
     [not found]               ` <CGME20180920101151eucas1p221f5a1715b8556bb9d99bf08fe09ce6f@eucas1p2.samsung.com>
2018-09-20 10:11                 ` Marek Szyprowski
2018-09-20 15:48                   ` Janusz Krzysztofik
2018-09-20 16:21                     ` Janusz Krzysztofik
2018-09-21  8:18                       ` Marek Szyprowski
2018-09-21 10:51                         ` Janusz Krzysztofik
2018-09-21 11:26                           ` Janusz Krzysztofik
2018-09-21 14:14                           ` Marek Szyprowski
2018-09-23 10:43                             ` Janusz Krzysztofik
2018-09-23 23:53                               ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Janusz Krzysztofik
2018-09-23 23:53                                 ` [PATCH 1/2] gpiolib: Fix missing updates of bitmap index Janusz Krzysztofik
2018-09-24  8:11                                   ` Linus Walleij
2018-09-29 12:20                                   ` [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit() Janusz Krzysztofik
2018-10-01  6:46                                     ` Marek Szyprowski
2018-10-01  9:37                                     ` Linus Walleij
2018-09-23 23:53                                 ` [PATCH 2/2] gpiolib: Fix array members of same chip processed separately Janusz Krzysztofik
2018-09-24  8:13                                   ` Linus Walleij
2018-09-24  9:43                                 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Marek Szyprowski
2018-09-24 11:08                                   ` Janusz Krzysztofik
2018-09-24 11:38                                     ` Marek Szyprowski
2018-09-24 14:18                                       ` Janusz Krzysztofik
2018-09-25 19:24                                         ` [PATCH] mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap Janusz Krzysztofik
2018-09-26  7:50                                           ` Linus Walleij
2018-09-26  8:14                                           ` Marek Szyprowski
     [not found]                                           ` <7a4906d9-ffb1-f2af-07e7-d5815dcd0d8c@samsung.com>
2018-09-26  8:27                                             ` Marek Szyprowski
2018-10-12 19:09                                           ` [RFT PATCH] " Janusz Krzysztofik
2018-10-15  8:32                                             ` Marek Szyprowski
2018-10-15 10:29                                             ` Ulf Hansson
2018-10-15 14:27                                             ` Linus Walleij
2018-09-20 18:05                     ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Dan Carpenter
2018-09-20 15:49                   ` Linus Walleij
2018-09-05 21:50             ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-13  9:22               ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-09-19 18:08                 ` Linus Walleij
2018-11-21 11:08     ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-11-23 17:02         ` Tony Lindgren
2018-11-21 11:08       ` [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 14:53         ` Boris Brezillon
2018-11-21 11:08       ` [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources Janusz Krzysztofik
2018-11-21 14:56       ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Boris Brezillon
2018-11-23 17:03         ` Tony Lindgren
2018-12-07  8:04           ` Miquel Raynal
2018-12-07 16:10             ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180831225616.29221-2-jmkrzyszt@gmail.com \
    --to=jmkrzyszt@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andrew@lunn.ch \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=f.fainelli@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=jslaby@suse.com \
    --cc=kishon@ti.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux@dominikbrodowski.net \
    --cc=miguel.ojeda.sandonis@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=peter.korsgaard@barco.com \
    --cc=pmeerw@pmeerw.net \
    --cc=ulf.hansson@linaro.org \
    --cc=w@1wt.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).