[PATCH v2 1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes

[PATCH v2 1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes

[Alexandre Belloni]

Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index c7b8d2c009cd..af972e91d6bc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -136,7 +136,7 @@
 	bus-num = <0>;
 	status = "okay";
 
-	qflash0: s25fl128s@0 {
+	qflash0: flash@0 {
 		compatible = "spansion,m25p80";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index e69306e6b0b1..219068220b84 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -165,7 +165,7 @@
 	bus-num = <0>;
 	status = "okay";
 
-	qflash0: s25fl128s@0 {
+	qflash0: flash@0 {
 		compatible = "spansion,m25p80";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 440e111651d5..df676b30357b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -103,7 +103,7 @@
 	bus-num = <0>;
 	status = "okay";
 
-	qflash0: s25fs512s@0 {
+	qflash0: flash@0 {
 		compatible = "spansion,m25p80";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -111,7 +111,7 @@
 		reg = <0>;
 	};
 
-	qflash1: s25fs512s@1 {
+	qflash1: flash@1 {
 		compatible = "spansion,m25p80";
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.19.0.rc1

[PATCH v2 2/5] arm64: dts: fsl: ls1046a: disable the flash controller by default

[Alexandre Belloni]

Set the Integrated Flash Controller status to disabled so each board has
the option to enable it. All the existing users have status = "okay" so
there is no functional change.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b90..2d8122019cd8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -200,6 +200,7 @@
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			big-endian;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		qspi: quadspi@1550000 {
-- 
2.19.0.rc1

[PATCH v2 3/5] arm64: dts: fsl: ls1046a: disable uarts by default

[Alexandre Belloni]

Disable the UARTs by defaultto avoid registering unused UARTs. This
effectively change the number of registered UARTS for the RDB and QDS from
4 to 2 but this seems the right thing to do.

It is especially useful when connecting other 8250 uart on PCIe for example
as the default maximum number of 8250 UARTs that can be registered is 4.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 2d8122019cd8..62ae3ee19d6f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -423,6 +423,7 @@
 			reg = <0x00 0x21c0500 0x0 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		duart1: serial@21c0600 {
@@ -430,6 +431,7 @@
 			reg = <0x00 0x21c0600 0x0 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		duart2: serial@21d0500 {
@@ -437,6 +439,7 @@
 			reg = <0x0 0x21d0500 0x0 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		duart3: serial@21d0600 {
@@ -444,6 +447,7 @@
 			reg = <0x0 0x21d0600 0x0 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
-- 
2.19.0.rc1

[PATCH v2 4/5] dt-bindings: Add vendor prefix for Microsys

[Alexandre Belloni]

Add vendor prefix for MicroSys Electronics GmbH

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2c3fc512e746..10155a44b783 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -235,6 +235,7 @@ micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
 microcrystal	Micro Crystal AG
 micron	Micron Technology Inc.
+microsys	MicroSys Electronics GmbH
 minix	MINIX Technology Ltd.
 miramems	MiraMEMS Sensing Technology Co., Ltd.
 mitsubishi	Mitsubishi Electric Corporation
-- 
2.19.0.rc1

[PATCH v2 5/5] arm64: dts: add Microsys MPX-LS1046A SoM and SBC-LS1046A SBC

[Alexandre Belloni]

Microsys designs a SoM based on the LS1046A named miriac MPX-LS1046A
https://microsys.de/products/system-on-modules/qoriqr-armr-architecture/miriactm-mpx-ls1046a/

It also provides an SBC accepting this SoM, the miriac SBC-LS1046
https://microsys.de/en/products/single-board-computer/miriactm-sbcs/miriactm-sbc-ls1046a/

This adds a dtsi for the SoM and a dts for the SBC.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---

Changes in v2:
 - Addressed Shawn's comments

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../fsl-ls1046a-miriac-mpxls1046.dtsi         |  62 ++++++++++
 .../freescale/fsl-ls1046a-miriac-sbc1046.dts  | 116 ++++++++++++++++++
 3 files changed, 179 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-mpxls1046.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-sbc1046.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 86e18adb695a..b0b81ca887e8 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-miriac-sbc1046.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-mpxls1046.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-mpxls1046.dtsi
new file mode 100644
index 000000000000..b4f998fbe460
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-mpxls1046.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/ {
+	compatible = "microsys,mpxls1046a", "fsl,ls1046a";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8803";
+		reg = <0x32>;
+	};
+
+	temp-sensor@4c {
+		compatible = "national,lm90";
+		reg = <0x4c>;
+	};
+
+	eeprom@50 {
+		compatible = "at24,24c128";
+		reg = <0x50>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+};
+
+&qspi {
+	num-cs = <1>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-sbc1046.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-sbc1046.dts
new file mode 100644
index 000000000000..c0c8ebdd6bb4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-miriac-sbc1046.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+#include "fsl-ls1046a-miriac-mpxls1046.dtsi"
+
+/ {
+	model = "Microsys miriac SBC-LS1046A";
+	compatible = "microsys,sbc1046a", "microsys,mpxls1046a", "fsl,ls1046a";
+
+	aliases {
+		ethernet0 = &enet2;
+		ethernet1 = &enet4;
+		ethernet2 = &enet5;
+		ethernet3 = &enet6;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "at24,24c128";
+		reg = <0x57>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ifc {
+	nand@0,0 {
+		partition@0 {
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			reg = <0x00100000 0x00100000>;
+			label = "NAND U-Boot Env";
+		};
+
+		partition@200000 {
+			reg = <0x00200000 0x01E00000>;
+			label = "NAND FIT Image";
+		};
+
+		partition@02000000 {
+			reg = <0x02000000 0x1e000000>;
+			label = "NAND (RW) UBIFS Root File System";
+		};
+	};
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	compatible = "fsl,fman", "simple-bus";
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 {
+		phy-handle = <&sgmii_phy3>;
+		phy-connection-type = "sgmii";
+	};
+
+	mdio@fc000 {
+		sgmii_phy3: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		sgmii_phy2: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		sgmii_phy1: ethernet-phy@2 {
+			reg = <2>;
+		};
+
+		rgmii_phy1: ethernet-phy@3 {
+			reg = <3>;
+		};
+	};
+};
-- 
2.19.0.rc1

Re: [PATCH v2 4/5] dt-bindings: Add vendor prefix for Microsys

[Shawn Guo, Rob Herring]

+Rob

@Rob, Are you okay with this?  The patch should really be sent to you
from the beginning.

Shawn

On Mon, Sep 03, 2018 at 04:08:39PM +0200, Alexandre Belloni wrote:
> Add vendor prefix for MicroSys Electronics GmbH
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 2c3fc512e746..10155a44b783 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -235,6 +235,7 @@ micrel	Micrel Inc.
>  microchip	Microchip Technology Inc.
>  microcrystal	Micro Crystal AG
>  micron	Micron Technology Inc.
> +microsys	MicroSys Electronics GmbH
>  minix	MINIX Technology Ltd.
>  miramems	MiraMEMS Sensing Technology Co., Ltd.
>  mitsubishi	Mitsubishi Electric Corporation
> -- 
> 2.19.0.rc1
> 

Re: [PATCH v2 1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes

[Shawn Guo]

The series looks good to me.  @Leo, what about you?

Shawn

On Mon, Sep 03, 2018 at 04:08:36PM +0200, Alexandre Belloni wrote:
> Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
>  arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
>  arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
>  3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> index c7b8d2c009cd..af972e91d6bc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> @@ -136,7 +136,7 @@
>  	bus-num = <0>;
>  	status = "okay";
>  
> -	qflash0: s25fl128s@0 {
> +	qflash0: flash@0 {
>  		compatible = "spansion,m25p80";
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> index e69306e6b0b1..219068220b84 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> @@ -165,7 +165,7 @@
>  	bus-num = <0>;
>  	status = "okay";
>  
> -	qflash0: s25fl128s@0 {
> +	qflash0: flash@0 {
>  		compatible = "spansion,m25p80";
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> index 440e111651d5..df676b30357b 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> @@ -103,7 +103,7 @@
>  	bus-num = <0>;
>  	status = "okay";
>  
> -	qflash0: s25fs512s@0 {
> +	qflash0: flash@0 {
>  		compatible = "spansion,m25p80";
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> @@ -111,7 +111,7 @@
>  		reg = <0>;
>  	};
>  
> -	qflash1: s25fs512s@1 {
> +	qflash1: flash@1 {
>  		compatible = "spansion,m25p80";
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> -- 
> 2.19.0.rc1
> 

Re: [PATCH v2 1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes

[Li Yang]

On Sun, Sep 9, 2018 at 10:11 PM Shawn Guo <shawnguo@kernel.org> wrote:
>
> The series looks good to me.  @Leo, what about you?

Looks fine to me too.

Acked-by: Li Yang <leoyang.li@nxp.com>

>
> Shawn
>
> On Mon, Sep 03, 2018 at 04:08:36PM +0200, Alexandre Belloni wrote:
> > Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
> >  3 files changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> > index c7b8d2c009cd..af972e91d6bc 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> > @@ -136,7 +136,7 @@
> >       bus-num = <0>;
> >       status = "okay";
> >
> > -     qflash0: s25fl128s@0 {
> > +     qflash0: flash@0 {
> >               compatible = "spansion,m25p80";
> >               #address-cells = <1>;
> >               #size-cells = <1>;
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> > index e69306e6b0b1..219068220b84 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> > @@ -165,7 +165,7 @@
> >       bus-num = <0>;
> >       status = "okay";
> >
> > -     qflash0: s25fl128s@0 {
> > +     qflash0: flash@0 {
> >               compatible = "spansion,m25p80";
> >               #address-cells = <1>;
> >               #size-cells = <1>;
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > index 440e111651d5..df676b30357b 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > @@ -103,7 +103,7 @@
> >       bus-num = <0>;
> >       status = "okay";
> >
> > -     qflash0: s25fs512s@0 {
> > +     qflash0: flash@0 {
> >               compatible = "spansion,m25p80";
> >               #address-cells = <1>;
> >               #size-cells = <1>;
> > @@ -111,7 +111,7 @@
> >               reg = <0>;
> >       };
> >
> > -     qflash1: s25fs512s@1 {
> > +     qflash1: flash@1 {
> >               compatible = "spansion,m25p80";
> >               #address-cells = <1>;
> >               #size-cells = <1>;
> > --
> > 2.19.0.rc1
> >

Re: [PATCH v2 4/5] dt-bindings: Add vendor prefix for Microsys

[Alexandre Belloni]

On 10/09/2018 08:38:53+0800, Shawn Guo wrote:
> +Rob
> 
> @Rob, Are you okay with this?  The patch should really be sent to you
> from the beginning.
> 

Ah right, Rob was cced on v1 and I forgot to do that in v2.

> Shawn
> 
> On Mon, Sep 03, 2018 at 04:08:39PM +0200, Alexandre Belloni wrote:
> > Add vendor prefix for MicroSys Electronics GmbH
> > 
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> > ---
> >  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > index 2c3fc512e746..10155a44b783 100644
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > @@ -235,6 +235,7 @@ micrel	Micrel Inc.
> >  microchip	Microchip Technology Inc.
> >  microcrystal	Micro Crystal AG
> >  micron	Micron Technology Inc.
> > +microsys	MicroSys Electronics GmbH
> >  minix	MINIX Technology Ltd.
> >  miramems	MiraMEMS Sensing Technology Co., Ltd.
> >  mitsubishi	Mitsubishi Electric Corporation
> > -- 
> > 2.19.0.rc1
> > 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com