LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Anholt <eric@anholt.net>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	linux-rpi-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 04/29] staging: bcm2835-audio: Remove redundant substream mask checks
Date: Tue,  4 Sep 2018 17:58:33 +0200
Message-ID: <20180904155858.8001-5-tiwai@suse.de> (raw)
In-Reply-To: <20180904155858.8001-1-tiwai@suse.de>

The avail_substreams bit mask is checked for the possible racy
accesses, but this cannot happen in practice; i.e. the assignment and
the check are superfluous.

Let's rip them off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 .../vc04_services/bcm2835-audio/bcm2835-ctl.c   |  2 --
 .../vc04_services/bcm2835-audio/bcm2835-pcm.c   |  8 --------
 .../vc04_services/bcm2835-audio/bcm2835-vchiq.c | 17 +++++++----------
 .../vc04_services/bcm2835-audio/bcm2835.c       |  5 +----
 .../vc04_services/bcm2835-audio/bcm2835.h       |  2 --
 5 files changed, 8 insertions(+), 26 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
index 1c5a87580978..d2f0f609f737 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
@@ -64,8 +64,6 @@ static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol,
 
 	mutex_lock(&chip->audio_mutex);
 
-	BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK));
-
 	if (kcontrol->private_value == PCM_PLAYBACK_VOLUME)
 		ucontrol->value.integer.value[0] = chip2alsa(chip->volume);
 	else if (kcontrol->private_value == PCM_PLAYBACK_MUTE)
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index f2d8b17d0cfe..0be185350f33 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -118,14 +118,6 @@ static int snd_bcm2835_playback_open_generic(
 		goto out;
 	}
 
-	/* Check if we are ready */
-	if (!(chip->avail_substreams & (1 << idx))) {
-		/* We are not ready yet */
-		audio_error("substream(%d) device is not ready yet\n", idx);
-		err = -EAGAIN;
-		goto out;
-	}
-
 	alsa_stream = kzalloc(sizeof(*alsa_stream), GFP_KERNEL);
 	if (!alsa_stream) {
 		err = -ENOMEM;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
index bec361aff4fe..942a38942c29 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
@@ -523,16 +523,13 @@ int bcm2835_audio_set_ctls(struct bcm2835_chip *chip)
 
 	/* change ctls for all substreams */
 	for (i = 0; i < MAX_SUBSTREAMS; i++) {
-		if (chip->avail_substreams & (1 << i)) {
-			if (!chip->alsa_stream[i]) {
-				LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams);
-				ret = 0;
-			} else if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) {
-				LOG_ERR("Couldn't set the controls for stream %d\n", i);
-				ret = -1;
-			} else {
-				LOG_DBG(" Controls set for stream %d\n", i);
-			}
+		if (!chip->alsa_stream[i])
+			continue;
+		if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) {
+			LOG_ERR("Couldn't set the controls for stream %d\n", i);
+			ret = -1;
+		} else {
+			LOG_DBG(" Controls set for stream %d\n", i);
 		}
 	}
 	return ret;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index fa04f6bc9858..6876a5eadc07 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -280,7 +280,7 @@ static int snd_add_child_device(struct device *device,
 	struct snd_card *card;
 	struct device *child;
 	struct bcm2835_chip *chip;
-	int err, i;
+	int err;
 
 	child = snd_create_device(device, &audio_driver->driver,
 				  audio_driver->driver.name);
@@ -325,9 +325,6 @@ static int snd_add_child_device(struct device *device,
 		return err;
 	}
 
-	for (i = 0; i < numchans; i++)
-		chip->avail_substreams |= (1 << i);
-
 	err = snd_card_register(card);
 	if (err) {
 		dev_err(child, "Failed to register card, error %d\n", err);
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
index 5dc427240a1d..c0e7df4914ed 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
@@ -98,8 +98,6 @@ struct bcm2835_chip {
 	struct snd_card *card;
 	struct snd_pcm *pcm;
 	struct snd_pcm *pcm_spdif;
-	/* Bitmat for valid reg_base and irq numbers */
-	unsigned int avail_substreams;
 	struct device *dev;
 	struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS];
 
-- 
2.18.0


  parent reply index

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-04 15:58 [PATCH 00/29] staging: bcm2835-audio: Cleanups and fixes Takashi Iwai
2018-09-04 15:58 ` [PATCH 01/29] staging: bcm2835-audio: Clean up mutex locks Takashi Iwai
2018-09-04 15:58 ` [PATCH 02/29] staging: bcm2835-audio: Remove redundant spdif stream ctls Takashi Iwai
2018-09-04 15:58 ` [PATCH 03/29] staging: bcm2835-audio: Clean up include files in bcm2835-ctl.c Takashi Iwai
2018-09-08 13:25   ` Stefan Wahren
2018-09-08 16:21     ` Takashi Iwai
2018-09-04 15:58 ` Takashi Iwai [this message]
2018-09-04 15:58 ` [PATCH 05/29] staging: bcm2835-audio: Fix mute controls, volume handling cleanup Takashi Iwai
2018-09-04 15:58 ` [PATCH 06/29] staging: bcm2835-audio: Remove redundant function calls Takashi Iwai
2018-09-04 15:58 ` [PATCH 07/29] staging: bcm2835-audio: Remove superfluous open flag Takashi Iwai
2018-09-04 15:58 ` [PATCH 08/29] staging: bcm2835-audio: Drop useless running flag and check Takashi Iwai
2018-09-04 15:58 ` [PATCH 09/29] staging: bcm2835-audio: Fix incorrect draining handling Takashi Iwai
2018-09-04 15:58 ` [PATCH 10/29] staging: bcm2835-audio: Kill unused spinlock Takashi Iwai
2018-09-04 15:58 ` [PATCH 11/29] staging: bcm2835-audio: Use PCM runtime values instead Takashi Iwai
2018-09-04 15:58 ` [PATCH 12/29] staging: bcm2835-audio: Drop unnecessary pcm indirect setup Takashi Iwai
2018-09-04 15:58 ` [PATCH 13/29] staging: bcm2835-audio: Drop useless NULL check Takashi Iwai
2018-09-04 15:58 ` [PATCH 14/29] staging: bcm2835-audio: Propagate parameter setup error Takashi Iwai
2018-09-04 15:58 ` [PATCH 15/29] staging: bcm2835-audio: Drop debug messages in bcm2835-pcm.c Takashi Iwai
2018-09-04 15:58 ` [PATCH 16/29] staging: bcm2835-audio: Drop superfluous mutex lock during prepare Takashi Iwai
2018-09-08 13:40   ` Stefan Wahren
2018-09-08 16:12     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 17/29] staging: bcm2835-audio: Add 10ms period constraint Takashi Iwai
2018-09-19  9:42   ` Stefan Wahren
2018-09-19  9:52     ` Takashi Iwai
2018-09-19 12:41       ` Stefan Wahren
2018-09-19 12:47         ` Mike Brady
2018-09-19 18:39         ` Takashi Iwai
2018-10-09 13:18           ` [PATCH 17/29] staging: bcm2835-audio: Add 10ms period constraint [Resend in plain text...] Mike Brady
2018-10-09 13:44             ` Takashi Iwai
2018-10-09 15:28               ` Mike Brady
2018-10-09 15:32                 ` Takashi Iwai
2018-10-11 12:53                 ` Mike Brady
2018-10-11 14:07                   ` Stefan Wahren
2018-10-13 15:00                   ` Mike Brady
2018-10-13 15:45                     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 18/29] staging: bcm2835-audio: Make single vchi handle Takashi Iwai
2018-09-04 15:58 ` [PATCH 19/29] staging: bcm2835-audio: Code refactoring of vchiq accessor codes Takashi Iwai
2018-09-04 15:58 ` [PATCH 20/29] staging: bcm2835-audio: Operate non-atomic PCM ops Takashi Iwai
2018-09-04 15:58 ` [PATCH 21/29] staging: bcm2835-audio: Use card->private_data Takashi Iwai
2018-09-04 15:58 ` [PATCH 22/29] staging: bcm2835-audio: Use standard error print helpers Takashi Iwai
2018-09-04 15:58 ` [PATCH 23/29] staging: bcm2835-audio: Remove unnecessary header file includes Takashi Iwai
2018-09-04 15:58 ` [PATCH 24/29] staging: bcm2835-audio: Move module parameter description Takashi Iwai
2018-09-04 15:58 ` [PATCH 25/29] staging: bcm2835-audio: Use coherent device buffers Takashi Iwai
2018-09-04 15:58 ` [PATCH 26/29] staging: bcm2835-audio: Set SNDRV_PCM_INFO_SYNC_APPLPTR Takashi Iwai
2018-09-04 15:58 ` [PATCH 27/29] staging: bcm2835-audio: Simplify PCM creation helpers Takashi Iwai
2018-09-04 15:58 ` [PATCH 28/29] staging: bcm2835-audio: Simplify kctl " Takashi Iwai
2018-09-04 15:58 ` [PATCH 29/29] staging: bcm2835-audio: Simplify card object management Takashi Iwai
2018-09-08 13:18 ` [PATCH 00/29] staging: bcm2835-audio: Cleanups and fixes Stefan Wahren
2018-09-08 16:21   ` Takashi Iwai
2018-09-08 17:00     ` Stefan Wahren
2018-09-08 17:16       ` Takashi Iwai
2018-09-10  9:12     ` Greg Kroah-Hartman
2018-09-10  9:16       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180904155858.8001-5-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=eric@anholt.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=stefan.wahren@i2se.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git