linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Tony Xie <tony.xie@rock-chips.com>
Cc: heiko@sntech.de, broonie@kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.com, a.zummo@towertech.it,
	alexandre.belloni@bootlin.com, sboyd@kernel.org,
	linux-clk@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, chenjh@rock-chips.com,
	xsf@rock-chips.com, zhangqing@rock-chips.com,
	huangtao@rock-chips.com
Subject: Re: [PATCH v3 1/5] mfd: rk808: Add RK817 and RK809 support
Date: Tue, 11 Sep 2018 12:47:32 +0100	[thread overview]
Message-ID: <20180911114732.GL4185@dell> (raw)
In-Reply-To: <1535081441-20718-2-git-send-email-tony.xie@rock-chips.com>

On Fri, 24 Aug 2018, Tony Xie wrote:

>     The rk809 and rk817 are a Power Management IC (PMIC) for multimedia
>     and handheld devices. It contains the following components:
> 
>         - Regulators
>         - RTC
>         - Clocking
> 
>     Both RK809 and RK817 chips are using a similar register map,
>     so we can reuse the RTC and Clocking and regulators functionality.
> 
> Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
> ---
>  drivers/mfd/Kconfig       |   6 +-
>  drivers/mfd/rk808.c       | 218 +++++++++++++++++++++++++++++++++++++++++++++-
>  include/linux/mfd/rk808.h | 172 ++++++++++++++++++++++++++++++++++++
>  kernel/reboot.c           |   1 +
>  4 files changed, 391 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index b860eb5..84f2f22 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -967,14 +967,14 @@ config MFD_RC5T583
>  	  different functionality of the device.
>  
>  config MFD_RK808
> -	tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
> +	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
>  	depends on I2C && OF
>  	select MFD_CORE
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
>  	help
> -	  If you say yes here you get support for the RK805, RK808 and RK818
> -	  Power Management chips.
> +	  If you say yes here you get support for the RK805, RK809 and RK817,
> +	  RK808 and RK818 Power Management chips.

Any reason why you've taken these out of order?

>  	  This driver provides common support for accessing the device
>  	  through I2C interface. The device supports multiple sub-devices
>  	  including interrupts, RTC, LDO & DCDC regulators, and onkey.
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> index 216fbf6..62e2fe1 100644
> --- a/drivers/mfd/rk808.c
> +++ b/drivers/mfd/rk808.c
> @@ -62,6 +62,29 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  	return false;
>  }
>  
> +static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	/*
> +	 * Notes:
> +	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
> +	 *   we don't use that feature.  It's better to cache.
> +	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
> +	 *   bits are cleared in case when we shutoff anyway, but better safe.
> +	 */
> +
> +	switch (reg) {
> +	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
> +	case RK817_RTC_STATUS_REG:
> +	case RK817_INT_STS_REG0:
> +	case RK817_INT_STS_REG1:
> +	case RK817_INT_STS_REG2:
> +	case RK817_SYS_STS:
> +		return true;
> +	}
> +
> +	return true;
> +}
> +
>  static const struct regmap_config rk818_regmap_config = {
>  	.reg_bits = 8,
>  	.val_bits = 8,
> @@ -86,6 +109,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  	.volatile_reg = rk808_is_volatile_reg,
>  };
>  
> +static const struct regmap_config rk817_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = RK817_GPIO_INT_CFG,
> +	.cache_type = REGCACHE_NONE,
> +	.volatile_reg = rk817_is_volatile_reg,
> +};
> +
>  static struct resource rtc_resources[] = {
>  	{
>  		.start  = RK808_IRQ_RTC_ALARM,
> @@ -94,6 +125,13 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  	}
>  };
>  
> +static struct resource rk817_rtc_resources[] = {
> +	{
> +		.start  = RK817_IRQ_RTC_ALARM,
> +		.end    = RK817_IRQ_RTC_ALARM,
> +		.flags  = IORESOURCE_IRQ,
> +	}
> +};
>  static struct resource rk805_key_resources[] = {
>  	{
>  		.start  = RK805_IRQ_PWRON_FALL,
> @@ -107,6 +145,19 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  	}
>  };
>  
> +static struct resource rk817_pwrkey_resources[] = {
> +	{
> +		.start  = RK817_IRQ_PWRON_RISE,
> +		.end    = RK817_IRQ_PWRON_RISE,
> +		.flags  = IORESOURCE_IRQ,
> +	},
> +	{
> +		.start  = RK817_IRQ_PWRON_FALL,
> +		.end    = RK817_IRQ_PWRON_FALL,
> +		.flags  = IORESOURCE_IRQ,
> +	},
> +};
> +
>  static const struct mfd_cell rk805s[] = {
>  	{ .name = "rk808-clkout", },
>  	{ .name = "rk808-regulator", },
> @@ -132,6 +183,21 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  	},
>  };
>  
> +static const struct mfd_cell rk817s[] = {
> +	{ .name = "rk808-clkout",},
> +	{ .name = "rk808-regulator",},
> +	{
> +		.name = "rk8xx-pwrkey",
> +		.num_resources = ARRAY_SIZE(rk817_pwrkey_resources),
> +		.resources = &rk817_pwrkey_resources[0],
> +	},
> +	{
> +		.name = "rk808-rtc",
> +		.num_resources = ARRAY_SIZE(rk817_rtc_resources),
> +		.resources = &rk817_rtc_resources[0],
> +	},
> +};
> +
>  static const struct mfd_cell rk818s[] = {
>  	{ .name = "rk808-clkout", },
>  	{ .name = "rk808-regulator", },
> @@ -167,6 +233,13 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  						    VB_LO_SEL_3500MV },
>  };
>  
> +static const struct rk808_reg_data rk817_pre_init_reg[] = {
> +	{RK817_RTC_CTRL_REG, RTC_STOP, RTC_STOP},
> +	{RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_H},
> +	{RK817_SYS_CFG(1), RK817_HOTDIE_TEMP_MSK | RK817_TSD_TEMP_MSK,
> +					   RK817_HOTDIE_105 | RK817_TSD_140},
> +};
> +
>  static const struct rk808_reg_data rk818_pre_init_reg[] = {
>  	/* improve efficiency */
>  	{ RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK,  BUCK_ILMIN_250MA },
> @@ -332,6 +405,39 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  	},
>  };
>  
> +#define REGMAP_IRQ_M(_id) \
> +	[_id] = {				\
> +		.mask = BIT(((_id) % 8)),	\
> +		.reg_offset = ((_id) / 8),	\
> +	}

If this is helpful for you, it will be helpful for others.

Please submit this to the Regmap subsystem.

See: include/linux/regmap.h

> +static const struct regmap_irq rk817_irqs[RK817_IRQ_END] = {
> +	REGMAP_IRQ_M(0),
> +	REGMAP_IRQ_M(1),
> +	REGMAP_IRQ_M(2),
> +	REGMAP_IRQ_M(3),
> +	REGMAP_IRQ_M(4),
> +	REGMAP_IRQ_M(5),
> +	REGMAP_IRQ_M(6),
> +	REGMAP_IRQ_M(7),
> +	REGMAP_IRQ_M(8),
> +	REGMAP_IRQ_M(9),
> +	REGMAP_IRQ_M(10),
> +	REGMAP_IRQ_M(11),
> +	REGMAP_IRQ_M(12),
> +	REGMAP_IRQ_M(13),
> +	REGMAP_IRQ_M(14),
> +	REGMAP_IRQ_M(15),
> +	REGMAP_IRQ_M(16),
> +	REGMAP_IRQ_M(17),
> +	REGMAP_IRQ_M(18),
> +	REGMAP_IRQ_M(19),
> +	REGMAP_IRQ_M(20),
> +	REGMAP_IRQ_M(21),
> +	REGMAP_IRQ_M(22),
> +	REGMAP_IRQ_M(23)
> +};
> +
>  static struct regmap_irq_chip rk805_irq_chip = {
>  	.name = "rk805",
>  	.irqs = rk805_irqs,
> @@ -355,6 +461,18 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>  	.init_ack_masked = true,
>  };
>  
> +static struct regmap_irq_chip rk817_irq_chip = {
> +	.name = "rk817",
> +	.irqs = rk817_irqs,
> +	.num_irqs = ARRAY_SIZE(rk817_irqs),
> +	.num_regs = 3,
> +	.irq_reg_stride = 2,
> +	.status_base = RK817_INT_STS_REG0,
> +	.mask_base = RK817_INT_STS_MSK_REG0,
> +	.ack_base = RK817_INT_STS_REG0,
> +	.init_ack_masked = true,
> +};
> +
>  static const struct regmap_irq_chip rk818_irq_chip = {
>  	.name = "rk818",
>  	.irqs = rk818_irqs,
> @@ -423,9 +541,39 @@ static void rk818_device_shutdown(void)
>  		dev_err(&rk808_i2c_client->dev, "power off error!\n");
>  }
>  
> +static void rk8xx_device_shutdown_prepare(void)
> +{
> +	int ret;
> +	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
> +
> +	if (!rk808) {
> +		dev_warn(&rk808_i2c_client->dev,
> +			 "have no rk808, so do nothing here\n");

This isn't a good warning to an end user.

Where is "here"?

Please provide something a little more forthcoming/descriptive.

> +		return;
> +	}
> +
> +	switch (rk808->variant) {
> +	case RK809_ID:
> +	case RK817_ID:
> +		ret = regmap_update_bits(rk808->regmap,
> +					 RK817_SYS_CFG(3),
> +					 RK817_SLPPIN_FUNC_MSK,
> +					 SLPPIN_DN_FUN);
> +		if (ret) {
> +			dev_warn(&rk808_i2c_client->dev,
> +				 "switch pin func to power down error!\n");

Again, what does this mean to an end user?  Probably very little.

> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +}
> +
>  static const struct of_device_id rk808_of_match[] = {
>  	{ .compatible = "rockchip,rk805" },
>  	{ .compatible = "rockchip,rk808" },
> +	{ .compatible = "rockchip,rk809" },
> +	{ .compatible = "rockchip,rk817" },
>  	{ .compatible = "rockchip,rk818" },
>  	{ },
>  };
> @@ -438,10 +586,11 @@ static int rk808_probe(struct i2c_client *client,
>  	struct rk808 *rk808;
>  	const struct rk808_reg_data *pre_init_reg;
>  	const struct mfd_cell *cells;
> -	void (*pm_pwroff_fn)(void);
> +	void (*pm_pwroff_fn)(void) = NULL;
>  	int nr_pre_init_regs;
>  	int nr_cells;
>  	int pm_off = 0, msb, lsb;
> +	unsigned char pmic_id_msb = RK808_ID_MSB, pmic_id_lsb = RK808_ID_LSB;

Please place these on separate lines.

>  	int ret;
>  	int i;
>  
> @@ -449,15 +598,20 @@ static int rk808_probe(struct i2c_client *client,
>  	if (!rk808)
>  		return -ENOMEM;
>  
> +	if (of_device_is_compatible(np, "rockchip,rk817") ||
> +	    of_device_is_compatible(np, "rockchip,rk809")) {
> +		pmic_id_msb = RK817_ID_MSB;
> +		pmic_id_lsb = RK817_ID_LSB;
> +	}

Rather than pre-assign default values at declaration, I think it would
be cleaner to have an else here.

>  	/* Read chip variant */
> -	msb = i2c_smbus_read_byte_data(client, RK808_ID_MSB);
> +	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
>  	if (msb < 0) {
>  		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
>  			RK808_ID_MSB);
>  		return msb;
>  	}
>  
> -	lsb = i2c_smbus_read_byte_data(client, RK808_ID_LSB);
> +	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
>  	if (lsb < 0) {
>  		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
>  			RK808_ID_LSB);
> @@ -495,6 +649,16 @@ static int rk808_probe(struct i2c_client *client,
>  		nr_cells = ARRAY_SIZE(rk818s);
>  		pm_pwroff_fn = rk818_device_shutdown;
>  		break;
> +	case RK809_ID:
> +	case RK817_ID:
> +		rk808->regmap_cfg = &rk817_regmap_config;
> +		rk808->regmap_irq_chip = &rk817_irq_chip;
> +		pre_init_reg = rk817_pre_init_reg;
> +		nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
> +		cells = rk817s;
> +		nr_cells = ARRAY_SIZE(rk817s);
> +		pm_power_off_prepare = rk8xx_device_shutdown_prepare;
> +		break;
>  	default:
>  		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
>  			rk808->variant);
> @@ -568,9 +732,56 @@ static int rk808_remove(struct i2c_client *client)
>  	return 0;
>  }
>  
> +static int rk8xx_suspend(struct device *dev)
> +{
> +	int ret = 0;
> +	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
> +
> +	switch (rk808->variant) {
> +	case RK809_ID:
> +	case RK817_ID:
> +		ret = regmap_update_bits(rk808->regmap,
> +					 RK817_SYS_CFG(3),
> +					 RK817_SLPPIN_FUNC_MSK,
> +					 SLPPIN_SLP_FUN);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int rk8xx_resume(struct device *dev)
> +{
> +	int ret = 0;
> +	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
> +
> +	switch (rk808->variant) {
> +	case RK809_ID:
> +	case RK817_ID:
> +		ret = regmap_update_bits(rk808->regmap,
> +					 RK817_SYS_CFG(3),
> +					 RK817_SLPPIN_FUNC_MSK,
> +					 SLPPIN_NULL_FUN);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops rk8xx_pm_ops = {
> +	.suspend = rk8xx_suspend,
> +	.resume =  rk8xx_resume,
> +};

Looks like you want SIMPLE_DEV_PM_OPS() here.

>  static const struct i2c_device_id rk808_ids[] = {
>  	{ "rk805" },
>  	{ "rk808" },
> +	{ "rk809" },
> +	{ "rk817" },
>  	{ "rk818" },
>  	{ },
>  };

I don't think this table is required anymore.

Try removing it.

> @@ -580,6 +791,7 @@ static int rk808_remove(struct i2c_client *client)
>  	.driver = {
>  		.name = "rk808",
>  		.of_match_table = rk808_of_match,
> +		.pm = &rk8xx_pm_ops,
>  	},
>  	.probe    = rk808_probe,
>  	.remove   = rk808_remove,
> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
> index d315659..b973b0a 100644
> --- a/include/linux/mfd/rk808.h
> +++ b/include/linux/mfd/rk808.h
> @@ -382,6 +382,7 @@ enum rk805_reg {
>  #define SWITCH1_EN	BIT(5)
>  #define DEV_OFF_RST	BIT(3)
>  #define DEV_OFF		BIT(0)
> +#define RTC_STOP	BIT(0)
>  
>  #define VB_LO_ACT		BIT(4)
>  #define VB_LO_SEL_3500MV	(7 << 0)
> @@ -396,6 +397,175 @@ enum rk805_reg {
>  #define SLEEP_FUN			(0x1 << 2)
>  #define RK8XX_ID_MSK			0xfff0
>  #define FPWM_MODE			BIT(7)
> +enum rk817_reg_id {
> +	RK817_ID_DCDC1 = 0,
> +	RK817_ID_DCDC2,
> +	RK817_ID_DCDC3,
> +	RK817_ID_DCDC4,
> +	RK817_ID_LDO1,
> +	RK817_ID_LDO2,
> +	RK817_ID_LDO3,
> +	RK817_ID_LDO4,
> +	RK817_ID_LDO5,
> +	RK817_ID_LDO6,
> +	RK817_ID_LDO7,
> +	RK817_ID_LDO8,
> +	RK817_ID_LDO9,
> +	RK817_ID_BOOST,
> +	RK817_ID_BOOST_OTG_SW,
> +	RK817_NUM_REGULATORS
> +};
> +
> +enum rk809_reg_id {
> +	RK809_ID_DCDC5 = RK817_ID_BOOST,
> +	RK809_ID_SW1,
> +	RK809_ID_SW2,
> +	RK809_NUM_REGULATORS
> +};
> +
> +#define RK817_SECONDS_REG		0x00
> +#define RK817_MINUTES_REG		0x01
> +#define RK817_HOURS_REG			0x02
> +#define RK817_DAYS_REG			0x03
> +#define RK817_MONTHS_REG		0x04
> +#define RK817_YEARS_REG			0x05
> +#define RK817_WEEKS_REG			0x06
> +#define RK817_ALARM_SECONDS_REG		0x07
> +#define RK817_ALARM_MINUTES_REG		0x08
> +#define RK817_ALARM_HOURS_REG		0x09
> +#define RK817_ALARM_DAYS_REG		0x0a
> +#define RK817_ALARM_MONTHS_REG		0x0b
> +#define RK817_ALARM_YEARS_REG		0x0c
> +#define RK817_RTC_CTRL_REG		0xd
> +#define RK817_RTC_STATUS_REG		0xe
> +#define RK817_RTC_INT_REG		0xf
> +#define RK817_RTC_COMP_LSB_REG		0x10
> +#define RK817_RTC_COMP_MSB_REG		0x11
> +
> +#define RK817_POWER_EN_REG(i)		(0xb1 + (i))
> +#define RK817_POWER_SLP_EN_REG(i)	(0xb5 + (i))
> +
> +#define RK817_POWER_CONFIG		(0xb9)
> +
> +#define RK817_BUCK_CONFIG_REG(i)	(0xba + (i) * 3)
> +
> +#define RK817_BUCK1_ON_VSEL_REG		0xBB
> +#define RK817_BUCK1_SLP_VSEL_REG	0xBC
> +
> +#define RK817_BUCK2_CONFIG_REG		0xBD
> +#define RK817_BUCK2_ON_VSEL_REG		0xBE
> +#define RK817_BUCK2_SLP_VSEL_REG	0xBF
> +
> +#define RK817_BUCK3_CONFIG_REG		0xC0
> +#define RK817_BUCK3_ON_VSEL_REG		0xC1
> +#define RK817_BUCK3_SLP_VSEL_REG	0xC2
> +
> +#define RK817_BUCK4_CONFIG_REG		0xC3
> +#define RK817_BUCK4_ON_VSEL_REG		0xC4
> +#define RK817_BUCK4_SLP_VSEL_REG	0xC5
> +
> +#define RK817_LDO_ON_VSEL_REG(idx)	(0xcc + (idx) * 2)
> +#define RK817_BOOST_OTG_CFG		(0xde)
> +
> +#define RK817_ID_MSB			0xed
> +#define RK817_ID_LSB			0xee
> +
> +#define RK817_SYS_STS			0xf0
> +#define RK817_SYS_CFG(i)		(0xf1 + (i))
> +
> +#define RK817_ON_SOURCE_REG		0xf5
> +#define RK817_OFF_SOURCE_REG		0xf6
> +
> +/* INTERRUPT REGISTER */
> +#define RK817_INT_STS_REG0		0xf8
> +#define RK817_INT_STS_MSK_REG0		0xf9
> +#define RK817_INT_STS_REG1		0xfa
> +#define RK817_INT_STS_MSK_REG1		0xfb
> +#define RK817_INT_STS_REG2		0xfc
> +#define RK817_INT_STS_MSK_REG2		0xfd
> +#define RK817_GPIO_INT_CFG		0xfe
> +
> +/* IRQ Definitions */
> +#define RK817_IRQ_PWRON_FALL		0
> +#define RK817_IRQ_PWRON_RISE		1
> +#define RK817_IRQ_PWRON			2
> +#define RK817_IRQ_PWMON_LP		3
> +#define RK817_IRQ_HOTDIE		4
> +#define RK817_IRQ_RTC_ALARM		5
> +#define RK817_IRQ_RTC_PERIOD		6
> +#define RK817_IRQ_VB_LO			7
> +#define RK817_IRQ_PLUG_IN		(8 + 0)
> +#define RK817_IRQ_PLUG_OUT		(8 + 1)
> +#define RK817_IRQ_CHRG_TERM		(8 + 2)
> +#define RK817_IRQ_CHRG_TIME		(8 + 3)
> +#define RK817_IRQ_CHRG_TS		(8 + 4)
> +#define RK817_IRQ_USB_OV		(8 + 5)
> +#define RK817_IRQ_CHRG_IN_CLMP		(8 + 6)
> +#define RK817_IRQ_BAT_DIS_ILIM		(8 + 7)
> +#define RK817_IRQ_GATE_GPIO		(16 + 0)
> +#define RK817_IRQ_TS_GPIO		(16 + 1)
> +#define RK817_IRQ_CODEC_PD		(16 + 2)
> +#define RK817_IRQ_CODEC_PO		(16 + 3)
> +#define RK817_IRQ_CLASSD_MUTE_DONE	(16 + 4)
> +#define RK817_IRQ_CLASSD_OCP		(16 + 5)
> +#define RK817_IRQ_BAT_OVP		(16 + 6)
> +#define RK817_IRQ_CHRG_BAT_HI		(16 + 7)
> +#define RK817_IRQ_END			(RK817_IRQ_CHRG_BAT_HI + 1)
> +
> +/*
> + * rtc_ctrl 0xd
> + * same as 808, except bit4
> + */
> +#define RK817_RTC_CTRL_RSV4		BIT(4)
> +
> +/* power config 0xb9 */
> +#define RK817_BUCK3_FB_RES_MSK		BIT(6)
> +#define RK817_BUCK3_FB_RES_INTER	BIT(6)
> +#define RK817_BUCK3_FB_RES_EXT		0
> +
> +/* buck config 0xba */
> +#define RK817_RAMP_RATE_OFFSET		6
> +#define RK817_RAMP_RATE_MASK		(0x3 << RK817_RAMP_RATE_OFFSET)
> +#define RK817_RAMP_RATE_3MV_PER_US	(0x0 << RK817_RAMP_RATE_OFFSET)
> +#define RK817_RAMP_RATE_6_3MV_PER_US	(0x1 << RK817_RAMP_RATE_OFFSET)
> +#define RK817_RAMP_RATE_12_5MV_PER_US	(0x2 << RK817_RAMP_RATE_OFFSET)
> +#define RK817_RAMP_RATE_25MV_PER_US	(0x3 << RK817_RAMP_RATE_OFFSET)
> +
> +/* sys_cfg1 0xf2 */
> +#define RK817_HOTDIE_TEMP_MSK		(0x3 << 4)
> +#define RK817_HOTDIE_85			(0x0 << 4)
> +#define RK817_HOTDIE_95			(0x1 << 4)
> +#define RK817_HOTDIE_105		(0x2 << 4)
> +#define RK817_HOTDIE_115		(0x3 << 4)
> +
> +#define RK817_TSD_TEMP_MSK		BIT(6)
> +#define RK817_TSD_140			0
> +#define RK817_TSD_160			BIT(6)
> +
> +#define RK817_CLK32KOUT2_EN		BIT(7)
> +
> +/* sys_cfg3 0xf4 */
> +#define RK817_SLPPIN_FUNC_MSK		(0x3 << 3)
> +#define SLPPIN_NULL_FUN			(0x0 << 3)
> +#define SLPPIN_SLP_FUN			(0x1 << 3)
> +#define SLPPIN_DN_FUN			(0x2 << 3)
> +#define SLPPIN_RST_FUN			(0x3 << 3)
> +
> +#define RK817_RST_FUNC_MSK		(0x3 << 6)
> +#define RK817_RST_FUNC_SFT		(6)
> +#define RK817_RST_FUNC_CNT		(3)
> +#define RK817_RST_FUNC_DEV		(0) /* reset the dev */
> +#define RK817_RST_FUNC_REG		(0x1 << 6) /* reset the reg only */
> +
> +#define RK817_SLPPOL_MSK		BIT(5)
> +#define RK817_SLPPOL_H			BIT(5)
> +#define RK817_SLPPOL_L			(0)
> +
> +/* gpio&int 0xfe */
> +#define RK817_INT_POL_MSK		BIT(1)
> +#define RK817_INT_POL_H			BIT(1)
> +#define RK817_INT_POL_L			0
> +#define RK809_BUCK5_CONFIG(i)		(RK817_BOOST_OTG_CFG + (i) * 1)
>  
>  enum {
>  	BUCK_ILMIN_50MA,
> @@ -443,6 +613,8 @@ enum {
>  enum {
>  	RK805_ID = 0x8050,
>  	RK808_ID = 0x0000,
> +	RK809_ID = 0x8090,
> +	RK817_ID = 0x8170,
>  	RK818_ID = 0x8181,
>  };
>  
> diff --git a/kernel/reboot.c b/kernel/reboot.c
> index e4ced88..83810d7 100644
> --- a/kernel/reboot.c
> +++ b/kernel/reboot.c
> @@ -49,6 +49,7 @@
>   */
>  
>  void (*pm_power_off_prepare)(void);
> +EXPORT_SYMBOL_GPL(pm_power_off_prepare);

Why do you need this where no other driver in the kernel does?

>  /**
>   *	emergency_restart - reboot the system

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2018-09-11 11:47 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-24  3:30 [PATCH v3 0/5] support a new type of PMIC,including two chips(rk817 and rk809) Tony Xie
2018-08-24  3:30 ` [PATCH v3 1/5] mfd: rk808: Add RK817 and RK809 support Tony Xie
2018-09-11 11:47   ` Lee Jones [this message]
2018-10-23  3:12     ` tony
2018-10-23  6:26       ` Lee Jones
2018-10-23  7:21         ` tony
2018-08-24  3:30 ` [PATCH v3 2/5] regulator: rk808: add RK809 and RK817 support Tony Xie
2018-08-24 12:23   ` Wadim Egorov
2018-08-24  3:30 ` [PATCH v3 3/5] dt-bindings: mfd: rk808: Add binding information for RK809 and RK817 Tony Xie
2018-08-28 22:40   ` Rob Herring
2018-09-11 12:37   ` Lee Jones
2018-08-24  3:30 ` [PATCH v3 4/5] rtc: rk808: add RK809 and RK817 support Tony Xie
2018-08-27 21:14   ` Alexandre Belloni
2018-08-24  3:35 ` Tony Xie
2018-08-24  3:36 ` [PATCH v3 5/5] clk: RK808: " Tony Xie
2018-08-31 17:34   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180911114732.GL4185@dell \
    --to=lee.jones@linaro.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=chenjh@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tony.xie@rock-chips.com \
    --cc=xsf@rock-chips.com \
    --cc=zhangqing@rock-chips.com \
    --subject='Re: [PATCH v3 1/5] mfd: rk808: Add RK817 and RK809 support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).