From: Al Viro <viro@ZenIV.linux.org.uk>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 22/50] fdti_sio: switch to ->[sg]et_serial()
Date: Thu, 13 Sep 2018 03:40:21 +0100 [thread overview]
Message-ID: <20180913024049.24567-22-viro@ZenIV.linux.org.uk> (raw)
In-Reply-To: <20180913024049.24567-1-viro@ZenIV.linux.org.uk>
From: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
drivers/usb/serial/ftdi_sio.c | 48 +++++++++++++++++++------------------------
1 file changed, 21 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b5cef322826f..758ba789e997 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1055,6 +1055,10 @@ static int ftdi_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
+static int get_serial_info(struct tty_struct *tty,
+ struct serial_struct *ss);
+static int set_serial_info(struct tty_struct *tty,
+ struct serial_struct *ss);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
static bool ftdi_tx_empty(struct usb_serial_port *port);
static int ftdi_get_modem_status(struct usb_serial_port *port,
@@ -1091,6 +1095,8 @@ static struct usb_serial_driver ftdi_sio_device = {
.tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.ioctl = ftdi_ioctl,
+ .get_serial = get_serial_info,
+ .set_serial = set_serial_info,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.tx_empty = ftdi_tx_empty,
@@ -1443,48 +1449,42 @@ static int read_latency_timer(struct usb_serial_port *port)
return 0;
}
-static int get_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *retinfo)
+static int get_serial_info(struct tty_struct *tty,
+ struct serial_struct *ss)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct serial_struct tmp;
- memset(&tmp, 0, sizeof(tmp));
- tmp.flags = priv->flags;
- tmp.baud_base = priv->baud_base;
- tmp.custom_divisor = priv->custom_divisor;
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
+ ss->flags = priv->flags;
+ ss->baud_base = priv->baud_base;
+ ss->custom_divisor = priv->custom_divisor;
return 0;
}
static int set_serial_info(struct tty_struct *tty,
- struct usb_serial_port *port, struct serial_struct __user *newinfo)
+ struct serial_struct *ss)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct serial_struct new_serial;
struct ftdi_private old_priv;
- if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
- return -EFAULT;
-
mutex_lock(&priv->cfg_lock);
old_priv = *priv;
/* Do error checking and permission checking */
if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.flags ^ priv->flags) & ~ASYNC_USR_MASK) {
+ if ((ss->flags ^ priv->flags) & ~ASYNC_USR_MASK) {
mutex_unlock(&priv->cfg_lock);
return -EPERM;
}
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- priv->custom_divisor = new_serial.custom_divisor;
+ (ss->flags & ASYNC_USR_MASK));
+ priv->custom_divisor = ss->custom_divisor;
goto check_and_exit;
}
- if (new_serial.baud_base != priv->baud_base) {
+ if (ss->baud_base != priv->baud_base) {
mutex_unlock(&priv->cfg_lock);
return -EINVAL;
}
@@ -1492,8 +1492,8 @@ static int set_serial_info(struct tty_struct *tty,
/* Make the changes - these are privileged changes! */
priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- priv->custom_divisor = new_serial.custom_divisor;
+ (ss->flags & ASYNC_FLAGS));
+ priv->custom_divisor = ss->custom_divisor;
check_and_exit:
write_latency_timer(port);
@@ -1507,10 +1507,8 @@ static int set_serial_info(struct tty_struct *tty,
dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n");
change_speed(tty, port);
- mutex_unlock(&priv->cfg_lock);
}
- else
- mutex_unlock(&priv->cfg_lock);
+ mutex_unlock(&priv->cfg_lock);
return 0;
}
@@ -2452,10 +2450,6 @@ static int ftdi_ioctl(struct tty_struct *tty,
void __user *argp = (void __user *)arg;
switch (cmd) {
- case TIOCGSERIAL:
- return get_serial_info(port, argp);
- case TIOCSSERIAL:
- return set_serial_info(tty, port, argp);
case TIOCSERGETLSR:
return get_lsr_info(port, argp);
default:
--
2.11.0
next prev parent reply other threads:[~2018-09-13 2:41 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 2:31 [PATCHES] tty ioctls cleanups, compat and not only Al Viro
2018-09-13 2:40 ` [PATCH 01/50] presence of RS485 ioctls has been unconditional since 2014 Al Viro
2018-09-13 2:40 ` [PATCH 02/50] move compat handling of tty ioctls to tty_compat_ioctl() Al Viro
2018-09-14 15:15 ` Arnd Bergmann
2018-09-14 18:16 ` gregkh
2018-09-14 19:38 ` Arnd Bergmann
2018-09-15 18:51 ` gregkh
2018-09-13 2:40 ` [PATCH 03/50] tty_ioctl(): drop FIONBIO handling Al Viro
2018-09-13 2:40 ` [PATCH 04/50] mos7720: bury dead TIOCM... in ->ioctl() Al Viro
2018-09-14 13:31 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 05/50] tty_ioctl(): start taking TIOC[SG]SERIAL into separate methods Al Viro
2018-09-14 13:22 ` Johan Hovold
2018-09-14 15:18 ` Al Viro
2018-09-14 16:23 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 06/50] simserial: switch to ->[sg]et_serial() Al Viro
2018-09-13 2:40 ` [PATCH 07/50] fwserial: " Al Viro
2018-09-13 2:40 ` [PATCH 08/50] greybus/uart: " Al Viro
2018-09-14 13:31 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 09/50] amiserial: " Al Viro
2018-09-13 10:33 ` Greg Kroah-Hartman
2018-10-11 17:58 ` Geert Uytterhoeven
2018-10-13 5:36 ` Al Viro
2018-09-13 2:40 ` [PATCH 10/50] cyclades: " Al Viro
2018-09-13 2:40 ` [PATCH 11/50] ipwireless: " Al Viro
2018-09-14 12:00 ` David Sterba
2018-09-13 2:40 ` [PATCH 12/50] isicom: " Al Viro
2018-09-13 2:40 ` [PATCH 13/50] moxa: " Al Viro
2018-09-13 2:40 ` [PATCH 14/50] mxser: " Al Viro
2018-09-13 2:40 ` [PATCH 15/50] serial_core: " Al Viro
2018-09-13 2:40 ` [PATCH 16/50] rfcomm: get rid of mentioning TIOC[SG]SERIAL Al Viro
2018-09-13 2:40 ` [PATCH 17/50] usb-serial: begin switching to ->[sg]et_serial() Al Viro
2018-09-14 13:39 ` Johan Hovold
2018-09-14 15:23 ` Al Viro
2018-09-14 15:26 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 18/50] cdc-acm: switch " Al Viro
2018-09-13 2:40 ` [PATCH 19/50] ark3116: switch to ->get_serial() Al Viro
2018-09-14 13:41 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 20/50] f81232: " Al Viro
2018-09-14 13:42 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 21/50] f81534: " Al Viro
2018-09-14 13:43 ` Johan Hovold
2018-09-13 2:40 ` Al Viro [this message]
2018-09-14 13:47 ` [PATCH 22/50] fdti_sio: switch to ->[sg]et_serial() Johan Hovold
2018-09-13 2:40 ` [PATCH 23/50] io_edgeport: switch to ->get_serial() Al Viro
2018-09-14 13:58 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 24/50] io_ti: " Al Viro
2018-09-14 13:59 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 25/50] mos7720: " Al Viro
2018-09-14 14:02 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 26/50] mos7840: " Al Viro
2018-09-14 14:07 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 27/50] opticon: " Al Viro
2018-09-14 14:08 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 28/50] pl2303: " Al Viro
2018-09-14 14:08 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 29/50] quatech2: " Al Viro
2018-09-14 14:09 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 30/50] ssu100: " Al Viro
2018-09-14 14:10 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 31/50] ti_usb_3410_5052: switch to ->[sg]et_serial() Al Viro
2018-09-14 14:12 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 32/50] whiteheat: switch to ->get_serial() Al Viro
2018-09-14 14:15 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 33/50] usb_wwan: switch to ->[sg]et_serial() Al Viro
2018-09-14 14:18 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 34/50] complete ->[sg]et_serial() switchover Al Viro
2018-09-14 14:20 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 35/50] synclink: reduce pointless checks in ->ioctl() Al Viro
2018-09-13 2:40 ` [PATCH 36/50] take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl() Al Viro
2018-09-13 2:40 ` [PATCH 37/50] kill capinc_tty_ioctl() Al Viro
2018-09-13 2:40 ` [PATCH 38/50] isdn_tty: TCSBRK{,P} won't reach ->ioctl() Al Viro
2018-09-13 2:40 ` [PATCH 39/50] dgnc: TIOCM... " Al Viro
2018-09-13 2:40 ` [PATCH 40/50] kill the rest of tty COMPAT_IOCTL() entries Al Viro
2018-09-13 10:55 ` Arnd Bergmann
2018-09-13 2:40 ` [PATCH 41/50] dgnc: break-related ioctls won't reach ->ioctl() Al Viro
2018-09-13 11:59 ` Greg Kroah-Hartman
2018-09-13 2:40 ` [PATCH 42/50] remove fallback to drivers for TIOCGICOUNT Al Viro
2018-09-14 14:23 ` Johan Hovold
2018-09-13 2:40 ` [PATCH 43/50] dgnc: leave TIOC[GS]SOFTCAR to ldisc Al Viro
2018-09-13 2:40 ` [PATCH 44/50] dgnc: don't bother with (empty) stub for TCXONC Al Viro
2018-09-13 2:40 ` [PATCH 45/50] gigaset: don't try to printk userland buffer contents Al Viro
2018-09-13 2:40 ` [PATCH 46/50] vt_compat_ioctl(): clean up, use compat_ptr() properly Al Viro
2018-09-13 10:10 ` Arnd Bergmann
2018-09-13 2:40 ` [PATCH 47/50] gigaset: add ->compat_ioctl() Al Viro
2018-09-13 2:40 ` [PATCH 48/50] compat_ioctl - kill keyboard ioctl handling Al Viro
2018-09-13 2:40 ` [PATCH 49/50] pty: fix compat ioctls Al Viro
2018-09-13 2:40 ` [PATCH 50/50] synclink_gt(): fix compat_ioctl() Al Viro
2018-09-13 11:19 ` [PATCHES] tty ioctls cleanups, compat and not only Arnd Bergmann
2018-09-13 20:31 ` Al Viro
2018-09-13 20:56 ` Arnd Bergmann
2018-09-14 2:27 ` Al Viro
2018-09-14 8:21 ` Arnd Bergmann
2018-09-14 15:10 ` Al Viro
2018-09-14 15:33 ` Arnd Bergmann
2018-09-13 11:59 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913024049.24567-22-viro@ZenIV.linux.org.uk \
--to=viro@zeniv.linux.org.uk \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).