From: jacopo mondi <jacopo@jmondi.org>
To: Steve Longerbeam <slongerbeam@gmail.com>
Cc: linux-media@vger.kernel.org,
"Steve Longerbeam" <steve_longerbeam@mentor.com>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Sebastian Reichel" <sre@kernel.org>,
"Hans Verkuil" <hans.verkuil@cisco.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 06/17] media: v4l2-fwnode: Add a convenience function for registering subdevs with notifiers
Date: Thu, 13 Sep 2018 12:37:27 +0200 [thread overview]
Message-ID: <20180913103727.GB28160@w540> (raw)
In-Reply-To: <1531175957-1973-7-git-send-email-steve_longerbeam@mentor.com>
[-- Attachment #1: Type: text/plain, Size: 6515 bytes --]
Hi Steve,
On Mon, Jul 09, 2018 at 03:39:06PM -0700, Steve Longerbeam wrote:
> Adds v4l2_async_register_fwnode_subdev(), which is a convenience function
> for parsing a sub-device's fwnode port endpoints for connected remote
> sub-devices, registering a sub-device notifier, and then registering
> the sub-device itself.
>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
> ---
> Changes since v5:
> - add call to v4l2_async_notifier_init().
> Changes since v4:
> - none
> Changes since v3:
> - remove support for port sub-devices, such sub-devices will have to
> role their own.
> Changes since v2:
> - fix error-out path in v4l2_async_register_fwnode_subdev() that forgot
> to put device.
> Changes since v1:
> - add #include <media/v4l2-subdev.h> to v4l2-fwnode.h for
> 'struct v4l2_subdev' declaration.
> ---
> drivers/media/v4l2-core/v4l2-fwnode.c | 64 +++++++++++++++++++++++++++++++++++
> include/media/v4l2-fwnode.h | 38 +++++++++++++++++++++
> 2 files changed, 102 insertions(+)
>
> diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
> index 67ad333..94d867a 100644
> --- a/drivers/media/v4l2-core/v4l2-fwnode.c
> +++ b/drivers/media/v4l2-core/v4l2-fwnode.c
> @@ -872,6 +872,70 @@ int v4l2_async_register_subdev_sensor_common(struct v4l2_subdev *sd)
> }
> EXPORT_SYMBOL_GPL(v4l2_async_register_subdev_sensor_common);
>
> +int v4l2_async_register_fwnode_subdev(
The meat of this function is to register a subdev with a notifier,
so I would make it clear in the function name which is otherwise
misleading
> + struct v4l2_subdev *sd, size_t asd_struct_size,
> + unsigned int *ports, unsigned int num_ports,
> + int (*parse_endpoint)(struct device *dev,
> + struct v4l2_fwnode_endpoint *vep,
> + struct v4l2_async_subdev *asd))
> +{
> + struct v4l2_async_notifier *notifier;
> + struct device *dev = sd->dev;
> + struct fwnode_handle *fwnode;
> + int ret;
> +
> + if (WARN_ON(!dev))
> + return -ENODEV;
> +
> + fwnode = dev_fwnode(dev);
> + if (!fwnode_device_is_available(fwnode))
> + return -ENODEV;
> +
> + notifier = kzalloc(sizeof(*notifier), GFP_KERNEL);
> + if (!notifier)
> + return -ENOMEM;
> +
> + v4l2_async_notifier_init(notifier);
> +
> + if (!ports) {
> + ret = v4l2_async_notifier_parse_fwnode_endpoints(
> + dev, notifier, asd_struct_size, parse_endpoint);
> + if (ret < 0)
> + goto out_cleanup;
> + } else {
> + unsigned int i;
> +
> + for (i = 0; i < num_ports; i++) {
It's not particularly exciting to iterate on pointers received from
callers without checking for num_ports first.
Also the caller has to allocate an array of "ports" and keep track of it
just to pass it to this function and I don't see a way to set the
notifier's ops before the notifier gets registered here below.
> + ret = v4l2_async_notifier_parse_fwnode_endpoints_by_port(
> + dev, notifier, asd_struct_size,
> + ports[i], parse_endpoint);
> + if (ret < 0)
> + goto out_cleanup;
> + }
> + }
> +
> + ret = v4l2_async_subdev_notifier_register(sd, notifier);
> + if (ret < 0)
> + goto out_cleanup;
> +
> + ret = v4l2_async_register_subdev(sd);
> + if (ret < 0)
> + goto out_unregister;
> +
> + sd->subdev_notifier = notifier;
This is set already by v4l2_async_subdev_notifier_register()
In general, I have doubts this function is really needed. It requires
the caller to reserve memory just to pass down a list of intergers,
and there is no way to set subdev ops.
Could you have a look at how drivers/media/platform/rcar-vin/rcar-csi2.c
registers a subdevice and an associated notifier and see if in your
opinion it can be implemented in the same way in your imx csi/csi2 driver,
or you still like this one most?
Thanks
j
> +
> + return 0;
> +
> +out_unregister:
> + v4l2_async_notifier_unregister(notifier);
> +out_cleanup:
> + v4l2_async_notifier_cleanup(notifier);
> + kfree(notifier);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(v4l2_async_register_fwnode_subdev);
> +
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Sakari Ailus <sakari.ailus@linux.intel.com>");
> MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
> diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
> index ea7a8b2..031ebb0 100644
> --- a/include/media/v4l2-fwnode.h
> +++ b/include/media/v4l2-fwnode.h
> @@ -23,6 +23,7 @@
> #include <linux/types.h>
>
> #include <media/v4l2-mediabus.h>
> +#include <media/v4l2-subdev.h>
>
> struct fwnode_handle;
> struct v4l2_async_notifier;
> @@ -360,4 +361,41 @@ int v4l2_async_notifier_parse_fwnode_endpoints_by_port(
> int v4l2_async_notifier_parse_fwnode_sensor_common(
> struct device *dev, struct v4l2_async_notifier *notifier);
>
> +/**
> + * v4l2_async_register_fwnode_subdev - registers a sub-device to the
> + * asynchronous sub-device framework
> + * and parses fwnode endpoints
> + *
> + * @sd: pointer to struct &v4l2_subdev
> + * @asd_struct_size: size of the driver's async sub-device struct, including
> + * sizeof(struct v4l2_async_subdev). The &struct
> + * v4l2_async_subdev shall be the first member of
> + * the driver's async sub-device struct, i.e. both
> + * begin at the same memory address.
> + * @ports: array of port id's to parse for fwnode endpoints. If NULL, will
> + * parse all ports owned by the sub-device.
> + * @num_ports: number of ports in @ports array. Ignored if @ports is NULL.
> + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
> + * endpoint. Optional.
> + *
> + * This function is just like v4l2_async_register_subdev() with the
> + * exception that calling it will also allocate a notifier for the
> + * sub-device, parse the sub-device's firmware node endpoints using
> + * v4l2_async_notifier_parse_fwnode_endpoints() or
> + * v4l2_async_notifier_parse_fwnode_endpoints_by_port(), and
> + * registers the sub-device notifier. The sub-device is similarly
> + * unregistered by calling v4l2_async_unregister_subdev().
> + *
> + * While registered, the subdev module is marked as in-use.
> + *
> + * An error is returned if the module is no longer loaded on any attempts
> + * to register it.
> + */
> +int v4l2_async_register_fwnode_subdev(
> + struct v4l2_subdev *sd, size_t asd_struct_size,
> + unsigned int *ports, unsigned int num_ports,
> + int (*parse_endpoint)(struct device *dev,
> + struct v4l2_fwnode_endpoint *vep,
> + struct v4l2_async_subdev *asd));
> +
> #endif /* _V4L2_FWNODE_H */
> --
> 2.7.4
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2018-09-13 10:37 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1531175957-1973-1-git-send-email-steve_longerbeam@mentor.com>
2018-07-09 22:39 ` [PATCH v6 01/17] media: v4l2-fwnode: ignore endpoints that have no remote port parent Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 02/17] media: v4l2: async: Allow searching for asd of any type Steve Longerbeam
2018-09-24 17:06 ` Mauro Carvalho Chehab
2018-09-25 21:04 ` Steve Longerbeam
2018-09-25 22:20 ` Mauro Carvalho Chehab
2018-09-26 1:05 ` Steve Longerbeam
2018-09-26 9:33 ` Mauro Carvalho Chehab
2018-09-26 10:40 ` Sakari Ailus
2018-09-26 17:49 ` Steve Longerbeam
2018-09-28 12:16 ` Sakari Ailus
2018-09-29 17:40 ` Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 03/17] media: v4l2: async: Add v4l2_async_notifier_add_subdev Steve Longerbeam
2018-08-03 15:13 ` jacopo mondi
2018-08-04 16:39 ` Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 04/17] media: v4l2: async: Add convenience functions to allocate and add asd's Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 05/17] media: v4l2-fwnode: Switch to v4l2_async_notifier_add_subdev Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 06/17] media: v4l2-fwnode: Add a convenience function for registering subdevs with notifiers Steve Longerbeam
2018-09-13 10:37 ` jacopo mondi [this message]
2018-09-13 12:44 ` Sakari Ailus
2018-09-13 12:58 ` jacopo mondi
2018-09-14 0:57 ` Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 07/17] media: platform: video-mux: Register a subdev notifier Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 08/17] media: imx: csi: " Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 09/17] media: imx: mipi csi-2: " Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 10/17] media: staging/imx: of: Remove recursive graph walk Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 11/17] media: staging/imx: Loop through all registered subdevs for media links Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 12/17] media: staging/imx: Rename root notifier Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 13/17] media: staging/imx: Switch to v4l2_async_notifier_add_*_subdev Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 14/17] media: staging/imx: TODO: Remove one assumption about OF graph parsing Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 16/17] media: v4l2: async: Remove notifier subdevs array Steve Longerbeam
2018-07-23 12:35 ` Sakari Ailus
2018-07-23 16:44 ` Steve Longerbeam
2018-07-23 17:24 ` Sakari Ailus
2018-08-04 10:33 ` jacopo mondi
2018-08-04 17:20 ` Steve Longerbeam
2018-07-09 22:39 ` [PATCH v6 17/17] [media] v4l2-subdev.rst: Update doc regarding subdev descriptors Steve Longerbeam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913103727.GB28160@w540 \
--to=jacopo@jmondi.org \
--cc=hans.verkuil@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
--cc=slongerbeam@gmail.com \
--cc=sre@kernel.org \
--cc=steve_longerbeam@mentor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).