LKML Archive on
 help / Atom feed
* [PATCH][regulator-next] regulator: pfuze100-regulator: fix spelling mistake "standy" -> "standby"
@ 2018-09-14 12:38 Colin King
  0 siblings, 0 replies; 1+ messages in thread
From: Colin King @ 2018-09-14 12:38 UTC (permalink / raw)
  To: Liam Girdwood, Mark Brown; +Cc: kernel-janitors, linux-kernel

From: Colin Ian King <>

Trivial fix to spelling mistake in dev_info message

Signed-off-by: Colin Ian King <>
 drivers/regulator/pfuze100-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 1e43a9de3bd5..dd41a9bb3f5c 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -576,7 +576,7 @@ static struct pfuze_chip *syspm_pfuze_chip;
 static void pfuze_power_off_prepare(void)
-	dev_info(syspm_pfuze_chip->dev, "Configure standy mode for power off");
+	dev_info(syspm_pfuze_chip->dev, "Configure standby mode for power off");
 	/* Switch from default mode: APS/APS to APS/Off */
 	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,

^ permalink raw reply	[flat|nested] 1+ messages in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-14 12:38 [PATCH][regulator-next] regulator: pfuze100-regulator: fix spelling mistake "standy" -> "standby" Colin King

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox