linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Feng Tang <feng.tang@intel.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Hocko <mhocko@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	linux-kernel@vger.kernel.org, x86@kernel.org,
	Ingo Molnar <mingo@elte.hu>,
	"H . Peter Anvin" <hpa@linux.intel.com>,
	Yinghai Lu <yinghai@kernel.org>,
	Dave Hansen <dave.hansen@intel.com>,
	Andi Kleen <ak@linux.intel.com>
Subject: Re: [PATCH] x86, mm: Reserver some memory for bootmem allocator for NO_BOOTMEM
Date: Sun, 16 Sep 2018 22:35:49 +0800	[thread overview]
Message-ID: <20180916143549.zmnlcviyn67fbxwh@shbuild888> (raw)
In-Reply-To: <alpine.DEB.2.21.1809151923270.1650@nanos.tec.linutronix.de>

On Sat, Sep 15, 2018 at 07:28:03PM +0200, Thomas Gleixner wrote:
> On Sun, 16 Sep 2018, Feng Tang wrote:
> > I have tried to change some header files incluing fixmap.h/apicdef.h/
> > vsyscall.h, and most of the .c files compile fine now, but I can not
> > use the "__end_of_permanent_fixed_addresses" in head_64.S as it is a 
> > enum type, and could not be recognized by assembly code.
> 
> Hrmm. I did not think about the enum. So we have two possibilities:
> 
> 1) Have some preprocessing which provides the info for the assembler
> 
> 2) Use a constant for the number of PMDs which is defined in a header and
>    then compile time checked against the size of the fixmap in a C-file.

As there is no fixmap.c, I put the chck into __native_set_fixmap temply,
please review, thanks

- Feng

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index e203169931c7..ffaa0fa31044 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -14,6 +14,9 @@
 #ifndef _ASM_X86_FIXMAP_H
 #define _ASM_X86_FIXMAP_H
 
+/* Put here to be accessble for assembly code like head_64.S */
+#define FIXMAP_PMD_NUM	2
+
 #ifndef __ASSEMBLY__
 #include <linux/kernel.h>
 #include <asm/acpi.h>
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index f773d5e6c8cc..d6820d4c6e47 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -14,6 +14,7 @@
 #include <asm/processor.h>
 #include <linux/bitops.h>
 #include <linux/threads.h>
+#include <asm/fixmap.h>
 
 extern p4d_t level4_kernel_pgt[512];
 extern p4d_t level4_ident_pgt[512];
@@ -22,7 +23,7 @@ extern pud_t level3_ident_pgt[512];
 extern pmd_t level2_kernel_pgt[512];
 extern pmd_t level2_fixmap_pgt[512];
 extern pmd_t level2_ident_pgt[512];
-extern pte_t level1_fixmap_pgt[512];
+extern pte_t level1_fixmap_pgt[512 * FIXMAP_PMD_NUM];
 extern pgd_t init_top_pgt[];
 
 #define swapper_pg_dir init_top_pgt
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 15ebc2fc166e..985eaff70792 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -24,6 +24,7 @@
 #include "../entry/calling.h"
 #include <asm/export.h>
 #include <asm/nospec-branch.h>
+#include <asm/fixmap.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/asm-offsets.h>
@@ -445,13 +446,19 @@ NEXT_PAGE(level2_kernel_pgt)
 		KERNEL_IMAGE_SIZE/PMD_SIZE)
 
 NEXT_PAGE(level2_fixmap_pgt)
-	.fill	506,8,0
-	.quad	level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
-	/* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
-	.fill	5,8,0
+	.fill	(512 - 4 - FIXMAP_PMD_NUM),8,0
+	pgtno = 0
+	.rept (FIXMAP_PMD_NUM)
+	.quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map  + _PAGE_TABLE_NOENC
+	pgtno = pgtno + 1
+	.endr
+	/* 6 MB reserved space + a 2MB hole */
+	.fill	4,8,0
 
 NEXT_PAGE(level1_fixmap_pgt)
+	.rept (FIXMAP_PMD_NUM)
 	.fill	512,8,0
+	.endr
 
 #undef PMDS
 
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index e848a4811785..a927f5f39bee 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -637,6 +637,16 @@ void __native_set_fixmap(enum fixed_addresses idx, pte_t pte)
 {
 	unsigned long address = __fix_to_virt(idx);
 
+#ifdef CONFIG_X86_64
+       /*
+        * In arch/x86/kernel/head_64.S, the static page table has
+	* been setup for fixmap. Add a sanity compiling check
+	* whether fixmap space has exceeded the capacity.
+        */
+       BUILD_BUG_ON((__end_of_permanent_fixed_addresses + 511)/512
+                       > FIXMAP_PMD_NUM);
+#endif
+
 	if (idx >= __end_of_fixed_addresses) {
 		BUG();
 		return;
diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
index 45b700ac5fe7..b0aa2364a3c6 100644
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -1953,7 +1953,10 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
 	set_page_prot(level2_ident_pgt, PAGE_KERNEL_RO);
 	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
 	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level1_fixmap_pgt, PAGE_KERNEL_RO);
+
+	for (i = 0; i < FIXMAP_PMD_NUM; i++)
+		set_page_prot(level1_fixmap_pgt + i * 512,
+				PAGE_KERNEL_RO);
 
 	/* Pin down new L4 */
 	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,

> 
> #1 would be preferred, but for a quick fix #2 is okay as well.
> 
> Thanks,
> 
> 	tglx
> 

  reply	other threads:[~2018-09-16 14:31 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-30  9:03 [PATCH] x86, mm: Reserver some memory for bootmem allocator for NO_BOOTMEM Feng Tang
2018-08-30 10:44 ` Peter Zijlstra
2018-08-30 11:12   ` Michal Hocko
2018-08-30 11:54     ` Thomas Gleixner
2018-08-30 12:49       ` Michal Hocko
2018-08-30 12:59         ` Feng Tang
2018-08-30 13:05           ` Thomas Gleixner
2018-08-30 13:19             ` Feng Tang
2018-08-30 13:25               ` Thomas Gleixner
2018-08-30 13:55                 ` Feng Tang
2018-08-31  6:15                 ` Feng Tang
2018-08-31 11:33                   ` Thomas Gleixner
2018-08-31 13:36                     ` Feng Tang
2018-09-07  8:17                       ` Feng Tang
2018-09-07 10:52                         ` Thomas Gleixner
2018-09-10  9:39                           ` Feng Tang
2018-09-10  9:53                             ` Thomas Gleixner
2018-09-11  6:14                               ` Feng Tang
2018-09-15 10:29                                 ` Thomas Gleixner
2018-09-15 16:47                                   ` Feng Tang
2018-09-15 17:28                                     ` Thomas Gleixner
2018-09-16 14:35                                       ` Feng Tang [this message]
2018-09-16 14:43                                         ` Thomas Gleixner
2018-09-16 15:06                                           ` Feng Tang
2018-09-17  7:01                                             ` Feng Tang
2018-09-17  7:01                                               ` Thomas Gleixner
2018-08-30 12:09     ` Peter Zijlstra
2018-08-30 12:39       ` Michal Hocko
2018-08-30 12:43   ` Feng Tang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180916143549.zmnlcviyn67fbxwh@shbuild888 \
    --to=feng.tang@intel.com \
    --cc=ak@linux.intel.com \
    --cc=dave.hansen@intel.com \
    --cc=hpa@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mhocko@kernel.org \
    --cc=mingo@elte.hu \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).