From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org, Tim Schumacher <timschumi@gmx.de>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 09/20] Input: iforce - use DMA-safe buffer when getting IDs from USB
Date: Mon, 17 Sep 2018 17:47:21 -0700 [thread overview]
Message-ID: <20180918004732.9875-9-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20180918004732.9875-1-dmitry.torokhov@gmail.com>
When working with USB devices we need to use DMA-safe buffers,
and iforce->edata is not one. Let's rework the code to allocate
temporary buffer (iforce_get_id() is called only during initialization
so there is no reason to have permanent buffer) and use it. While at it,
let's utilize usb_control_msg() API which simplifies code.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/joystick/iforce/iforce-usb.c | 68 +++++++---------------
1 file changed, 22 insertions(+), 46 deletions(-)
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 9d635f01cf19..cefaa1c5abc7 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -29,8 +29,7 @@ struct iforce_usb {
struct usb_device *usbdev;
struct usb_interface *intf;
- struct urb *irq, *out, *ctrl;
- struct usb_ctrlrequest cr;
+ struct urb *irq, *out;
};
static void __iforce_usb_xmit(struct iforce *iforce)
@@ -92,30 +91,32 @@ static int iforce_usb_get_id(struct iforce *iforce, u8 *packet)
{
struct iforce_usb *iforce_usb = container_of(iforce, struct iforce_usb,
iforce);
+ u8 *buf;
int status;
- iforce_usb->cr.bRequest = packet[0];
- iforce_usb->ctrl->dev = iforce_usb->usbdev;
-
- status = usb_submit_urb(iforce_usb->ctrl, GFP_KERNEL);
- if (status) {
+ buf = kmalloc(IFORCE_MAX_LENGTH, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(iforce_usb->usbdev,
+ usb_rcvctrlpipe(iforce_usb->usbdev, 0),
+ packet[0],
+ USB_TYPE_VENDOR | USB_DIR_IN |
+ USB_RECIP_INTERFACE,
+ 0, 0, buf, IFORCE_MAX_LENGTH, HZ);
+ if (status < 0) {
dev_err(&iforce_usb->intf->dev,
- "usb_submit_urb failed %d\n", status);
- return -EIO;
- }
-
- wait_event_interruptible_timeout(iforce->wait,
- iforce_usb->ctrl->status != -EINPROGRESS, HZ);
-
- if (iforce_usb->ctrl->status) {
- dev_dbg(&iforce_usb->intf->dev,
- "iforce->ctrl->status = %d\n",
- iforce_usb->ctrl->status);
- usb_unlink_urb(iforce_usb->ctrl);
- return -EIO;
+ "usb_submit_urb failed: %d\n", status);
+ } else if (buf[0] != packet[0]) {
+ status = -EIO;
+ } else {
+ iforce->ecmd = 0xff00 | status;
+ memcpy(iforce->edata, buf, status);
+ status = 0;
}
- return -(iforce->edata[0] != packet[0]);
+ kfree(buf);
+ return status;
}
static int iforce_usb_start_io(struct iforce *iforce)
@@ -136,7 +137,6 @@ static void iforce_usb_stop_io(struct iforce *iforce)
usb_kill_urb(iforce_usb->irq);
usb_kill_urb(iforce_usb->out);
- usb_kill_urb(iforce_usb->ctrl);
}
static const struct iforce_xport_ops iforce_usb_xport_ops = {
@@ -197,18 +197,6 @@ static void iforce_usb_out(struct urb *urb)
wake_up(&iforce->wait);
}
-static void iforce_usb_ctrl(struct urb *urb)
-{
- struct iforce_usb *iforce_usb = urb->context;
- struct iforce *iforce = &iforce_usb->iforce;
-
- if (urb->status)
- return;
-
- iforce->ecmd = 0xff00 | urb->actual_length;
- wake_up(&iforce->wait);
-}
-
static int iforce_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -236,9 +224,6 @@ static int iforce_usb_probe(struct usb_interface *intf,
if (!(iforce_usb->out = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
- if (!(iforce_usb->ctrl = usb_alloc_urb(0, GFP_KERNEL)))
- goto fail;
-
iforce = &iforce_usb->iforce;
iforce->xport_ops = &iforce_usb_xport_ops;
@@ -247,19 +232,12 @@ static int iforce_usb_probe(struct usb_interface *intf,
iforce_usb->usbdev = dev;
iforce_usb->intf = intf;
- iforce_usb->cr.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE;
- iforce_usb->cr.wIndex = 0;
- iforce_usb->cr.wLength = cpu_to_le16(16);
-
usb_fill_int_urb(iforce_usb->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress),
iforce->data, 16, iforce_usb_irq, iforce_usb, epirq->bInterval);
usb_fill_int_urb(iforce_usb->out, dev, usb_sndintpipe(dev, epout->bEndpointAddress),
iforce_usb + 1, 32, iforce_usb_out, iforce_usb, epout->bInterval);
- usb_fill_control_urb(iforce_usb->ctrl, dev, usb_rcvctrlpipe(dev, 0),
- (void*) &iforce_usb->cr, iforce->edata, 16, iforce_usb_ctrl, iforce_usb);
-
err = iforce_init_device(&intf->dev, BUS_USB, iforce);
if (err)
goto fail;
@@ -271,7 +249,6 @@ static int iforce_usb_probe(struct usb_interface *intf,
if (iforce_usb) {
usb_free_urb(iforce_usb->irq);
usb_free_urb(iforce_usb->out);
- usb_free_urb(iforce_usb->ctrl);
kfree(iforce_usb);
}
@@ -288,7 +265,6 @@ static void iforce_usb_disconnect(struct usb_interface *intf)
usb_free_urb(iforce_usb->irq);
usb_free_urb(iforce_usb->out);
- usb_free_urb(iforce_usb->ctrl);
kfree(iforce_usb);
}
--
2.19.0.397.gdd90340f6a-goog
next prev parent reply other threads:[~2018-09-18 0:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 0:47 [PATCH 01/20] Input: iforce - remove "being used" silliness Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 02/20] Input: iforce - introduce transport ops Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 03/20] Input: iforce - move get_id to the transport operations Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 04/20] Input: iforce - move command completion handling to serio code Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 05/20] Input: iforce - introduce start and stop io transport ops Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 06/20] Input: iforce - add bus type and parent arguments to iforce_init_device() Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 07/20] Input: iforce - move transport data into transport modules Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 08/20] Input: iforce - split into core and " Dmitry Torokhov
2018-09-18 0:47 ` Dmitry Torokhov [this message]
2018-09-18 0:47 ` [PATCH 10/20] Input: iforce - update formatting of switch statements Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 11/20] Input: iforce - factor out hat handling when parsing packets Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 12/20] Input: iforce - do not combine arguments for iforce_process_packet() Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 13/20] Input: iforce - signal command completion from transport code Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 14/20] Input: iforce - only call iforce_process_packet() if initialized Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 15/20] Input: iforce - allow callers supply data buffer when fetching device IDs Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 16/20] Input: iforce - use DMA-safe buffores for USB transfers Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 17/20] Input: only credit entropy when events are generated by a device Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 18/20] Input: iforce - drop bus type from iforce structure Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 19/20] Input: iforce - drop couple of temps from transport code Dmitry Torokhov
2018-09-18 0:47 ` [PATCH 20/20] Input: iforce - use unaligned accessors, where appropriate Dmitry Torokhov
2018-09-19 14:51 ` [PATCH 01/20] Input: iforce - remove "being used" silliness Tim Schumacher
2018-09-19 17:10 ` Dmitry Torokhov
2019-06-12 14:44 ` Tim Schumacher
2019-06-19 0:24 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180918004732.9875-9-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=timschumi@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).