* [PATCH v2 0/2] remoteproc: qcom: Rename adsp and mss drivers @ 2018-09-14 17:35 Bjorn Andersson 2018-09-14 17:35 ` [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver Bjorn Andersson 2018-09-14 17:35 ` [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver Bjorn Andersson 0 siblings, 2 replies; 5+ messages in thread From: Bjorn Andersson @ 2018-09-14 17:35 UTC (permalink / raw) To: Ohad Ben-Cohen, Bjorn Andersson Cc: linux-remoteproc, linux-kernel, linux-arm-msm, Niklas Cassel As we're introducing a non-TZ based remoteproc driver for the ADSP in SDM845 the current naming scheme becomes cumbersome. Rename the existing drivers in order to allow for the following: qcom_q6v5_adsp - handle the non-TZ adsp subsystem qcom_q6v5_mss - handles the self-authenticated modem qcom_q6v5_pas - handles all TZ based "standard" subsystems qcom_q6v5_wcss - handles the non-TZ wireless subsystem Bjorn Andersson (2): remoteproc: qcom: Rename Hexagon v5 PAS driver remoteproc: qcom: Rename Hexagon v5 modem driver drivers/remoteproc/Kconfig | 35 ++++++++++--------- drivers/remoteproc/Makefile | 4 +-- .../{qcom_q6v5_pil.c => qcom_q6v5_mss.c} | 0 .../{qcom_adsp_pil.c => qcom_q6v5_pas.c} | 4 +-- 4 files changed, 22 insertions(+), 21 deletions(-) rename drivers/remoteproc/{qcom_q6v5_pil.c => qcom_q6v5_mss.c} (100%) rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%) -- 2.18.0 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver 2018-09-14 17:35 [PATCH v2 0/2] remoteproc: qcom: Rename adsp and mss drivers Bjorn Andersson @ 2018-09-14 17:35 ` Bjorn Andersson 2018-09-18 16:23 ` Niklas Cassel 2018-09-14 17:35 ` [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver Bjorn Andersson 1 sibling, 1 reply; 5+ messages in thread From: Bjorn Andersson @ 2018-09-14 17:35 UTC (permalink / raw) To: Ohad Ben-Cohen, Bjorn Andersson Cc: linux-remoteproc, linux-kernel, linux-arm-msm, Niklas Cassel, Rohit kumar The Hexagon v5 ADSP driver is used for more than only the ADSP and there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to qcom_q6v5_pas in order to better suite this. Cc: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/remoteproc/Kconfig | 27 ++++++++++--------- drivers/remoteproc/Makefile | 2 +- .../{qcom_q6v5_pil.c => qcom_q6v5_mss.c} | 0 .../{qcom_adsp_pil.c => qcom_q6v5_pas.c} | 4 +-- 4 files changed, 17 insertions(+), 16 deletions(-) rename drivers/remoteproc/{qcom_q6v5_pil.c => qcom_q6v5_mss.c} (100%) rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%) diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 052d4dd347f9..425e502c6471 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -84,8 +84,16 @@ config KEYSTONE_REMOTEPROC It's safe to say N here if you're not interested in the Keystone DSPs or just want to use a bare minimum kernel. -config QCOM_ADSP_PIL - tristate "Qualcomm ADSP Peripheral Image Loader" +config QCOM_RPROC_COMMON + tristate + +config QCOM_Q6V5_COMMON + tristate + depends on ARCH_QCOM + depends on QCOM_SMEM + +config QCOM_Q6V5_PAS + tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support" depends on OF && ARCH_QCOM depends on QCOM_SMEM depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) @@ -98,15 +106,7 @@ config QCOM_ADSP_PIL select QCOM_SCM help Say y here to support the TrustZone based Peripherial Image Loader - for the Qualcomm ADSP remote processors. - -config QCOM_RPROC_COMMON - tristate - -config QCOM_Q6V5_COMMON - tristate - depends on ARCH_QCOM - depends on QCOM_SMEM + for the Qualcomm Hexagon v5 based remote processors. config QCOM_Q6V5_PIL tristate "Qualcomm Hexagon V5 Peripherial Image Loader" @@ -120,8 +120,9 @@ config QCOM_Q6V5_PIL select QCOM_RPROC_COMMON select QCOM_SCM help - Say y here to support the Qualcomm Peripherial Image Loader for the - Hexagon V5 based remote processors. + Say y here to support the TrustZone based Peripherial Image Loader + for the Qualcomm Hexagon v5 based remote processors. This is commonly + used to control subsystems such as ADSP, Compute and Sensor. config QCOM_Q6V5_WCSS tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader" diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 03332fa7e2ee..eb86c8ba5a87 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -14,9 +14,9 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o -obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o +obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_mss.c similarity index 100% rename from drivers/remoteproc/qcom_q6v5_pil.c rename to drivers/remoteproc/qcom_q6v5_mss.c diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_q6v5_pas.c similarity index 98% rename from drivers/remoteproc/qcom_adsp_pil.c rename to drivers/remoteproc/qcom_q6v5_pas.c index d4339a6da616..2478ef3cd519 100644 --- a/drivers/remoteproc/qcom_adsp_pil.c +++ b/drivers/remoteproc/qcom_q6v5_pas.c @@ -364,11 +364,11 @@ static struct platform_driver adsp_driver = { .probe = adsp_probe, .remove = adsp_remove, .driver = { - .name = "qcom_adsp_pil", + .name = "qcom_q6v5_pas", .of_match_table = adsp_of_match, }, }; module_platform_driver(adsp_driver); -MODULE_DESCRIPTION("Qualcomm MSM8974/MSM8996 ADSP Peripherial Image Loader"); +MODULE_DESCRIPTION("Qualcomm Hexagon v5 Peripheral Authentication Service driver"); MODULE_LICENSE("GPL v2"); -- 2.18.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver 2018-09-14 17:35 ` [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver Bjorn Andersson @ 2018-09-18 16:23 ` Niklas Cassel 0 siblings, 0 replies; 5+ messages in thread From: Niklas Cassel @ 2018-09-18 16:23 UTC (permalink / raw) To: Bjorn Andersson Cc: Ohad Ben-Cohen, linux-remoteproc, linux-kernel, linux-arm-msm, Rohit kumar On Fri, Sep 14, 2018 at 10:35:51AM -0700, Bjorn Andersson wrote: > The Hexagon v5 ADSP driver is used for more than only the ADSP and > there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to > qcom_q6v5_pas in order to better suite this. > > Cc: Rohit kumar <rohitkr@codeaurora.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > drivers/remoteproc/Kconfig | 27 ++++++++++--------- > drivers/remoteproc/Makefile | 2 +- > .../{qcom_q6v5_pil.c => qcom_q6v5_mss.c} | 0 > .../{qcom_adsp_pil.c => qcom_q6v5_pas.c} | 4 +-- > 4 files changed, 17 insertions(+), 16 deletions(-) > rename drivers/remoteproc/{qcom_q6v5_pil.c => qcom_q6v5_mss.c} (100%) > rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%) Hello Bjorn, I would have expected the second rename to be in patch 2/2. Kind regards, Niklas > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index 052d4dd347f9..425e502c6471 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -84,8 +84,16 @@ config KEYSTONE_REMOTEPROC > It's safe to say N here if you're not interested in the Keystone > DSPs or just want to use a bare minimum kernel. > > -config QCOM_ADSP_PIL > - tristate "Qualcomm ADSP Peripheral Image Loader" > +config QCOM_RPROC_COMMON > + tristate > + > +config QCOM_Q6V5_COMMON > + tristate > + depends on ARCH_QCOM > + depends on QCOM_SMEM > + > +config QCOM_Q6V5_PAS > + tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support" > depends on OF && ARCH_QCOM > depends on QCOM_SMEM > depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) > @@ -98,15 +106,7 @@ config QCOM_ADSP_PIL > select QCOM_SCM > help > Say y here to support the TrustZone based Peripherial Image Loader > - for the Qualcomm ADSP remote processors. > - > -config QCOM_RPROC_COMMON > - tristate > - > -config QCOM_Q6V5_COMMON > - tristate > - depends on ARCH_QCOM > - depends on QCOM_SMEM > + for the Qualcomm Hexagon v5 based remote processors. > > config QCOM_Q6V5_PIL > tristate "Qualcomm Hexagon V5 Peripherial Image Loader" > @@ -120,8 +120,9 @@ config QCOM_Q6V5_PIL > select QCOM_RPROC_COMMON > select QCOM_SCM > help > - Say y here to support the Qualcomm Peripherial Image Loader for the > - Hexagon V5 based remote processors. > + Say y here to support the TrustZone based Peripherial Image Loader > + for the Qualcomm Hexagon v5 based remote processors. This is commonly > + used to control subsystems such as ADSP, Compute and Sensor. > > config QCOM_Q6V5_WCSS > tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader" > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > index 03332fa7e2ee..eb86c8ba5a87 100644 > --- a/drivers/remoteproc/Makefile > +++ b/drivers/remoteproc/Makefile > @@ -14,9 +14,9 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o > obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o > obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o > obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o > -obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o > obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o > obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o > +obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o > obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o > obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o > obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o > diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_mss.c > similarity index 100% > rename from drivers/remoteproc/qcom_q6v5_pil.c > rename to drivers/remoteproc/qcom_q6v5_mss.c > diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_q6v5_pas.c > similarity index 98% > rename from drivers/remoteproc/qcom_adsp_pil.c > rename to drivers/remoteproc/qcom_q6v5_pas.c > index d4339a6da616..2478ef3cd519 100644 > --- a/drivers/remoteproc/qcom_adsp_pil.c > +++ b/drivers/remoteproc/qcom_q6v5_pas.c > @@ -364,11 +364,11 @@ static struct platform_driver adsp_driver = { > .probe = adsp_probe, > .remove = adsp_remove, > .driver = { > - .name = "qcom_adsp_pil", > + .name = "qcom_q6v5_pas", > .of_match_table = adsp_of_match, > }, > }; > > module_platform_driver(adsp_driver); > -MODULE_DESCRIPTION("Qualcomm MSM8974/MSM8996 ADSP Peripherial Image Loader"); > +MODULE_DESCRIPTION("Qualcomm Hexagon v5 Peripheral Authentication Service driver"); > MODULE_LICENSE("GPL v2"); > -- > 2.18.0 > ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver 2018-09-14 17:35 [PATCH v2 0/2] remoteproc: qcom: Rename adsp and mss drivers Bjorn Andersson 2018-09-14 17:35 ` [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver Bjorn Andersson @ 2018-09-14 17:35 ` Bjorn Andersson 2018-09-18 16:26 ` Niklas Cassel 1 sibling, 1 reply; 5+ messages in thread From: Bjorn Andersson @ 2018-09-14 17:35 UTC (permalink / raw) To: Ohad Ben-Cohen, Bjorn Andersson Cc: linux-remoteproc, linux-kernel, linux-arm-msm, Niklas Cassel The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific. No functional change. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/remoteproc/Kconfig | 14 +++++++------- drivers/remoteproc/Makefile | 2 +- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 425e502c6471..8894935583e2 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -92,30 +92,30 @@ config QCOM_Q6V5_COMMON depends on ARCH_QCOM depends on QCOM_SMEM -config QCOM_Q6V5_PAS - tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support" +config QCOM_Q6V5_MSS + tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support" depends on OF && ARCH_QCOM depends on QCOM_SMEM depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n depends on QCOM_SYSMON || QCOM_SYSMON=n select MFD_SYSCON - select QCOM_MDT_LOADER select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON select QCOM_SCM help - Say y here to support the TrustZone based Peripherial Image Loader - for the Qualcomm Hexagon v5 based remote processors. + Say y here to support the Qualcomm self-authenticating modem + subsystem based on Hexagon V5. -config QCOM_Q6V5_PIL - tristate "Qualcomm Hexagon V5 Peripherial Image Loader" +config QCOM_Q6V5_PAS + tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support" depends on OF && ARCH_QCOM depends on QCOM_SMEM depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n depends on QCOM_SYSMON || QCOM_SYSMON=n select MFD_SYSCON + select QCOM_MDT_LOADER select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON select QCOM_SCM diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index eb86c8ba5a87..050f41ac93b0 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -16,8 +16,8 @@ obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o +obj-$(CONFIG_QCOM_Q6V5_MSS) += qcom_q6v5_mss.o obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o -obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o -- 2.18.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver 2018-09-14 17:35 ` [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver Bjorn Andersson @ 2018-09-18 16:26 ` Niklas Cassel 0 siblings, 0 replies; 5+ messages in thread From: Niklas Cassel @ 2018-09-18 16:26 UTC (permalink / raw) To: Bjorn Andersson Cc: Ohad Ben-Cohen, linux-remoteproc, linux-kernel, linux-arm-msm On Fri, Sep 14, 2018 at 10:35:52AM -0700, Bjorn Andersson wrote: > The qcom_q6v5_pil implements support for the self-authenticating modem > subsystem. With the introduction of other q6v5 based non-TZ based > remoteproc driver the current name is cause for confusion, so rename it > to be more specific. > > No functional change. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > drivers/remoteproc/Kconfig | 14 +++++++------- > drivers/remoteproc/Makefile | 2 +- > 2 files changed, 8 insertions(+), 8 deletions(-) Hello Bjorn, Patch 1/2 modifies platform_driver.driver.name and MODULE_DESCRIPTION. I would have expected this patch to do the same. Kind regards, Niklas > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index 425e502c6471..8894935583e2 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -92,30 +92,30 @@ config QCOM_Q6V5_COMMON > depends on ARCH_QCOM > depends on QCOM_SMEM > > -config QCOM_Q6V5_PAS > - tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support" > +config QCOM_Q6V5_MSS > + tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support" > depends on OF && ARCH_QCOM > depends on QCOM_SMEM > depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) > depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n > depends on QCOM_SYSMON || QCOM_SYSMON=n > select MFD_SYSCON > - select QCOM_MDT_LOADER > select QCOM_Q6V5_COMMON > select QCOM_RPROC_COMMON > select QCOM_SCM > help > - Say y here to support the TrustZone based Peripherial Image Loader > - for the Qualcomm Hexagon v5 based remote processors. > + Say y here to support the Qualcomm self-authenticating modem > + subsystem based on Hexagon V5. > > -config QCOM_Q6V5_PIL > - tristate "Qualcomm Hexagon V5 Peripherial Image Loader" > +config QCOM_Q6V5_PAS > + tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support" > depends on OF && ARCH_QCOM > depends on QCOM_SMEM > depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) > depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n > depends on QCOM_SYSMON || QCOM_SYSMON=n > select MFD_SYSCON > + select QCOM_MDT_LOADER > select QCOM_Q6V5_COMMON > select QCOM_RPROC_COMMON > select QCOM_SCM > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > index eb86c8ba5a87..050f41ac93b0 100644 > --- a/drivers/remoteproc/Makefile > +++ b/drivers/remoteproc/Makefile > @@ -16,8 +16,8 @@ obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o > obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o > obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o > obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o > +obj-$(CONFIG_QCOM_Q6V5_MSS) += qcom_q6v5_mss.o > obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o > -obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o > obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o > obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o > obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o > -- > 2.18.0 > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-09-18 16:26 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-09-14 17:35 [PATCH v2 0/2] remoteproc: qcom: Rename adsp and mss drivers Bjorn Andersson 2018-09-14 17:35 ` [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver Bjorn Andersson 2018-09-18 16:23 ` Niklas Cassel 2018-09-14 17:35 ` [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver Bjorn Andersson 2018-09-18 16:26 ` Niklas Cassel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).