linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: laurentiu.tudor@nxp.com
To: devicetree@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: roy.pledge@nxp.com, madalin.bucur@nxp.com, davem@davemloft.net,
	shawnguo@kernel.org, leoyang.li@nxp.com,
	Laurentiu Tudor <laurentiu.tudor@nxp.com>
Subject: [PATCH 13/21] dpaa_eth: fix iova handling for contiguous frames
Date: Wed, 19 Sep 2018 15:36:05 +0300	[thread overview]
Message-ID: <20180919123613.15092-14-laurentiu.tudor@nxp.com> (raw)
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

The driver relies on the no longer valid assumption that dma addresses
(iovas) are identical to physical addressees and uses phys_to_virt() to
make iova -> vaddr conversions. Fix this by adding a function that does
proper iova -> phys conversions using the iommu api and update the code
to use it.
Also, a dma_unmap_single() call had to be moved further down the code
because iova -> vaddr conversions were required before the unmap.
For now only the contiguous frame case is handled and the SG case is
split in a following patch.
While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
as parameter.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
 .../net/ethernet/freescale/dpaa/dpaa_eth.c    | 44 ++++++++++---------
 1 file changed, 24 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index ac9e50c8a556..e9e081c3f8cc 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -50,6 +50,7 @@
 #include <linux/highmem.h>
 #include <linux/percpu.h>
 #include <linux/dma-mapping.h>
+#include <linux/iommu.h>
 #include <linux/sort.h>
 #include <soc/fsl/bman.h>
 #include <soc/fsl/qman.h>
@@ -1595,6 +1596,17 @@ static int dpaa_eth_refill_bpools(struct dpaa_priv *priv)
 	return 0;
 }
 
+static phys_addr_t dpaa_iova_to_phys(struct device *dev, dma_addr_t addr)
+{
+	struct iommu_domain *domain;
+
+	domain = iommu_get_domain_for_dev(dev);
+	if (domain)
+		return iommu_iova_to_phys(domain, addr);
+	else
+		return addr;
+}
+
 /* Cleanup function for outgoing frame descriptors that were built on Tx path,
  * either contiguous frames or scatter/gather ones.
  * Skb freeing is not handled here.
@@ -1617,7 +1629,7 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
 	int nr_frags, i;
 	u64 ns;
 
-	skbh = (struct sk_buff **)phys_to_virt(addr);
+	skbh = (struct sk_buff **)phys_to_virt(dpaa_iova_to_phys(dev, addr));
 	skb = *skbh;
 
 	if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
@@ -1687,25 +1699,21 @@ static u8 rx_csum_offload(const struct dpaa_priv *priv, const struct qm_fd *fd)
  * accommodate the shared info area of the skb.
  */
 static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
-					const struct qm_fd *fd)
+					const struct qm_fd *fd,
+					struct dpaa_bp *dpaa_bp,
+					void *vaddr)
 {
 	ssize_t fd_off = qm_fd_get_offset(fd);
-	dma_addr_t addr = qm_fd_addr(fd);
-	struct dpaa_bp *dpaa_bp;
 	struct sk_buff *skb;
-	void *vaddr;
 
-	vaddr = phys_to_virt(addr);
 	WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
 
-	dpaa_bp = dpaa_bpid2pool(fd->bpid);
-	if (!dpaa_bp)
-		goto free_buffer;
-
 	skb = build_skb(vaddr, dpaa_bp->size +
 			SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
-	if (WARN_ONCE(!skb, "Build skb failure on Rx\n"))
-		goto free_buffer;
+	if (WARN_ONCE(!skb, "Build skb failure on Rx\n")) {
+		skb_free_frag(vaddr);
+		return NULL;
+	}
 	WARN_ON(fd_off != priv->rx_headroom);
 	skb_reserve(skb, fd_off);
 	skb_put(skb, qm_fd_get_length(fd));
@@ -1713,10 +1721,6 @@ static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
 	skb->ip_summed = rx_csum_offload(priv, fd);
 
 	return skb;
-
-free_buffer:
-	skb_free_frag(vaddr);
-	return NULL;
 }
 
 /* Build an skb with the data of the first S/G entry in the linear portion and
@@ -2302,12 +2306,12 @@ static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
 	if (!dpaa_bp)
 		return qman_cb_dqrr_consume;
 
-	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
-
 	/* prefetch the first 64 bytes of the frame or the SGT start */
-	vaddr = phys_to_virt(addr);
+	vaddr = phys_to_virt(dpaa_iova_to_phys(dpaa_bp->dev, addr));
 	prefetch(vaddr + qm_fd_get_offset(fd));
 
+	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
+
 	/* The only FD types that we may receive are contig and S/G */
 	WARN_ON((fd_format != qm_fd_contig) && (fd_format != qm_fd_sg));
 
@@ -2318,7 +2322,7 @@ static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
 	(*count_ptr)--;
 
 	if (likely(fd_format == qm_fd_contig))
-		skb = contig_fd_to_skb(priv, fd);
+		skb = contig_fd_to_skb(priv, fd, dpaa_bp, vaddr);
 	else
 		skb = sg_fd_to_skb(priv, fd);
 	if (!skb)
-- 
2.17.1


  parent reply	other threads:[~2018-09-19 12:37 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-19 12:35 [PATCH 00/21] SMMU enablement for NXP LS1043A and LS1046A laurentiu.tudor
2018-09-19 12:35 ` [PATCH 01/21] soc/fsl/qman: fixup liodns only on ppc targets laurentiu.tudor
2018-09-19 12:35 ` [PATCH 02/21] soc/fsl/bman: map FBPR area in the iommu laurentiu.tudor
2018-09-19 12:35 ` [PATCH 03/21] soc/fsl/qman: map FQD and PFDR areas " laurentiu.tudor
2018-09-19 12:35 ` [PATCH 04/21] soc/fsl/qman-portal: map CENA area " laurentiu.tudor
2018-09-19 12:35 ` [PATCH 05/21] soc/fsl/qbman: add APIs to retrieve the probing status laurentiu.tudor
2018-09-19 12:35 ` [PATCH 06/21] soc/fsl/qman_portals: defer probe after qman's probe laurentiu.tudor
2018-09-19 12:35 ` [PATCH 07/21] soc/fsl/bman_portals: defer probe after bman's probe laurentiu.tudor
2018-09-19 12:36 ` [PATCH 08/21] soc/fsl/qbman_portals: add APIs to retrieve the probing status laurentiu.tudor
2018-09-19 12:36 ` [PATCH 09/21] fsl/fman: backup and restore ICID registers laurentiu.tudor
2018-09-19 12:36 ` [PATCH 10/21] fsl/fman: add API to get the device behind a fman port laurentiu.tudor
2018-09-19 12:36 ` [PATCH 11/21] dpaa_eth: defer probing after qbman laurentiu.tudor
2018-09-19 12:36 ` [PATCH 12/21] dpaa_eth: base dma mappings on the fman rx port laurentiu.tudor
2018-09-19 12:36 ` laurentiu.tudor [this message]
2018-09-19 12:36 ` [PATCH 14/21] dpaa_eth: fix iova handling for sg frames laurentiu.tudor
2018-09-19 12:36 ` [PATCH 15/21] dpaa_eth: fix SG frame cleanup laurentiu.tudor
2018-09-19 12:36 ` [PATCH 16/21] arm64: dts: ls1046a: add smmu node laurentiu.tudor
2018-09-19 13:30   ` Robin Murphy
2018-09-19 13:51     ` Laurentiu Tudor
2018-09-19 12:36 ` [PATCH 17/21] arm64: dts: ls1043a: " laurentiu.tudor
2018-09-19 12:36 ` [PATCH 18/21] arm64: dts: ls104xa: set mask to drop TBU ID from StreamID laurentiu.tudor
2018-09-19 13:41   ` Robin Murphy
2018-09-19 14:06     ` Laurentiu Tudor
2018-09-19 12:36 ` [PATCH 19/21] arm64: dts: ls104x: add missing dma ranges property laurentiu.tudor
2018-09-19 12:36 ` [PATCH 20/21] arm64: dts: ls104x: add iommu-map to pci controllers laurentiu.tudor
2018-09-19 12:36 ` [PATCH 21/21] arm64: dts: ls104x: make dma-coherent global to the SoC laurentiu.tudor
2018-09-19 13:25 ` [PATCH 00/21] SMMU enablement for NXP LS1043A and LS1046A Robin Murphy
2018-09-19 14:18   ` Laurentiu Tudor
2018-09-19 14:37     ` Robin Murphy
2018-09-20 10:38       ` Laurentiu Tudor
2018-09-20 11:49         ` Robin Murphy
2018-09-20 14:33           ` Laurentiu Tudor
2018-09-20 19:07         ` Li Yang
2018-09-21  7:32           ` Laurentiu Tudor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180919123613.15092-14-laurentiu.tudor@nxp.com \
    --to=laurentiu.tudor@nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=madalin.bucur@nxp.com \
    --cc=netdev@vger.kernel.org \
    --cc=roy.pledge@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).