linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: kishon@ti.com, vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
	martin.petersen@oracle.com, linux-kernel@vger.kernel.org,
	linux-scsi@vger.kernel.org, subhashj@codeaurora.org,
	evgreen@chromium.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 2/3] scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host
Date: Mon, 24 Sep 2018 10:24:32 -0700	[thread overview]
Message-ID: <20180924172432.GL1367@tuxbook-pro> (raw)
In-Reply-To: <20180904101719.18049-3-vivek.gautam@codeaurora.org>

On Tue 04 Sep 03:17 PDT 2018, Vivek Gautam wrote:

> The host makes direct calls into phy using ufs_qcom_phy_*()
> APIs. These APIs are only defined for 20nm qcom-ufs-qmp phy
> which is not being used by any architecture as yet. Future
> architectures too are not going to use 20nm ufs phy.
> So remove these ufs_qcom_phy_*() calls from host to let further
> change declare the 20nm phy as broken.
> Also remove couple of stale enum defines for ufs phy.
> 
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/phy/qualcomm/phy-qcom-ufs-i.h |  2 +-
>  drivers/scsi/ufs/ufs-qcom.c           | 28 +---------------------------
>  drivers/scsi/ufs/ufs-qcom.h           |  5 -----
>  include/linux/phy/phy-qcom-ufs.h      | 24 ------------------------
>  4 files changed, 2 insertions(+), 57 deletions(-)
>  delete mode 100644 include/linux/phy/phy-qcom-ufs.h
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> index 822c83b8efcd..681644e43248 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> @@ -17,9 +17,9 @@
>  
>  #include <linux/module.h>
>  #include <linux/clk.h>
> +#include <linux/phy/phy.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
> -#include <linux/phy/phy-qcom-ufs.h>
>  #include <linux/platform_device.h>
>  #include <linux/io.h>
>  #include <linux/delay.h>
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 75ee5906b966..3dc4501c6945 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -16,7 +16,6 @@
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/phy.h>
> -#include <linux/phy/phy-qcom-ufs.h>
>  
>  #include "ufshcd.h"
>  #include "ufshcd-pltfrm.h"
> @@ -189,22 +188,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
>  
>  static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
>  {
> -	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> -	struct phy *phy = host->generic_phy;
>  	u32 tx_lanes;
> -	int err = 0;
> -
> -	err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
> -	if (err)
> -		goto out;
>  
> -	err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
> -	if (err)
> -		dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
> -			__func__);
> -
> -out:
> -	return err;
> +	return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
>  }
>  
>  static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
> @@ -932,10 +918,8 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
>  {
>  	u32 val;
>  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> -	struct phy *phy = host->generic_phy;
>  	struct ufs_qcom_dev_params ufs_qcom_cap;
>  	int ret = 0;
> -	int res = 0;
>  
>  	if (!dev_req_params) {
>  		pr_err("%s: incoming dev_req_params is NULL\n", __func__);
> @@ -1002,12 +986,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
>  		}
>  
>  		val = ~(MAX_U32 << dev_req_params->lane_tx);
> -		res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
> -		if (res) {
> -			dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
> -				__func__, res);
> -			ret = res;
> -		}
>  
>  		/* cache the power mode parameters to use internally */
>  		memcpy(&host->dev_req_params,
> @@ -1264,10 +1242,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>  		}
>  	}
>  
> -	/* update phy revision information before calling phy_init() */
> -	ufs_qcom_phy_save_controller_version(host->generic_phy,
> -		host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
> -
>  	err = ufs_qcom_init_lane_clks(host);
>  	if (err)
>  		goto out_variant_clear;
> diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
> index 295f4bef6a0e..c114826316eb 100644
> --- a/drivers/scsi/ufs/ufs-qcom.h
> +++ b/drivers/scsi/ufs/ufs-qcom.h
> @@ -129,11 +129,6 @@ enum {
>  	MASK_CLK_NS_REG                     = 0xFFFC00,
>  };
>  
> -enum ufs_qcom_phy_init_type {
> -	UFS_PHY_INIT_FULL,
> -	UFS_PHY_INIT_CFG_RESTORE,
> -};
> -
>  /* QCOM UFS debug print bit mask */
>  #define UFS_QCOM_DBG_PRINT_REGS_EN	BIT(0)
>  #define UFS_QCOM_DBG_PRINT_ICE_REGS_EN	BIT(1)
> diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
> deleted file mode 100644
> index 9dd85071bcce..000000000000
> --- a/include/linux/phy/phy-qcom-ufs.h
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -/*
> - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 and
> - * only version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - */
> -
> -#ifndef PHY_QCOM_UFS_H_
> -#define PHY_QCOM_UFS_H_
> -
> -#include "phy.h"
> -
> -int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
> -void ufs_qcom_phy_save_controller_version(struct phy *phy,
> -			u8 major, u16 minor, u16 step);
> -
> -#endif /* PHY_QCOM_UFS_H_ */
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

  reply	other threads:[~2018-09-24 17:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-04 10:17 [PATCH 0/3] scsi: ufs-qcom: Remove all direct calls to qcom-ufs phy Vivek Gautam
2018-09-04 10:17 ` [PATCH 1/3] phy: qcom-ufs: Remove stale methods that handle ref clk Vivek Gautam
2018-09-24 17:23   ` Bjorn Andersson
2018-09-25  5:40     ` Vivek Gautam
2018-09-04 10:17 ` [PATCH 2/3] scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host Vivek Gautam
2018-09-24 17:24   ` Bjorn Andersson [this message]
2018-09-25  9:52     ` Vivek Gautam
2018-09-26  0:28       ` Martin K. Petersen
2018-09-26  6:14         ` Vivek Gautam
2018-09-04 10:17 ` [PATCH 3/3] phy: qcom-ufs: Declare 20nm qcom ufs qmp phy as Broken Vivek Gautam
2018-09-24 17:29   ` Bjorn Andersson
2018-09-24  8:14 ` [PATCH 0/3] scsi: ufs-qcom: Remove all direct calls to qcom-ufs phy Vivek Gautam
2018-09-25  6:42 ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180924172432.GL1367@tuxbook-pro \
    --to=bjorn.andersson@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=subhashj@codeaurora.org \
    --cc=vinholikatti@gmail.com \
    --cc=vivek.gautam@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).