Hi Tony,

On Mon, 24 Sep 2018 15:03:45 -0700
Tony Lindgren <tony@atomide.com> wrote:

> * Andreas Kemnade <andreas@kemnade.info> [180923 08:12]:
> > This enables the possibility to have more aggressive runtime pm
> > by providing proper wakeup irq for the serial console.  
> 
> Thanks applying to omap-for-v4.20/dt.
> 
> FYI, you can now grep wake /proc/interrupts and see the
> wakeirq counts increase when they trigger. Might be handy
> for debugging PM stuff.
> 
thanks for that information, you also had a patch for checking
pm which was explicitely marked as not-to-merge. Is there
any up-to-date version of it?

Well, for debugging I check first average currents via bq27000
attached to omap_hdq. omap_hdq gets stuck after first transaction
after idling uarts which does not happen when CM_AUTOIDLE1_CORE.AUTO_HDQ
is cleared. Reloading the omap_hdq module to try to fix things
makes w1 really freak out (patch already sent for that).
Well, will do some rtfm and hopefully come back with a patch.
afaicr there was something special...
The result are power management problem in /dev/brain ;-)

Regards,
Andreas