linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Steve Longerbeam <steve_longerbeam@mentor.com>
To: <linux-media@vger.kernel.org>
Cc: "Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Sebastian Reichel" <sre@kernel.org>,
	"Hans Verkuil" <hans.verkuil@cisco.com>,
	"open list" <linux-kernel@vger.kernel.org>
Subject: [PATCH v7 04/17] media: v4l2: async: Add convenience functions to allocate and add asd's
Date: Sat, 29 Sep 2018 11:40:39 -0700	[thread overview]
Message-ID: <20180929184052.19479-5-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <20180929184052.19479-1-steve_longerbeam@mentor.com>

Add these convenience functions, which allocate an asd of match type
fwnode, i2c, or device-name, of size asd_struct_size, and then adds
them to the notifier asd_list.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 drivers/media/v4l2-core/v4l2-async.c | 76 ++++++++++++++++++++++++++++
 include/media/v4l2-async.h           | 62 +++++++++++++++++++++++
 2 files changed, 138 insertions(+)

diff --git a/drivers/media/v4l2-core/v4l2-async.c b/drivers/media/v4l2-core/v4l2-async.c
index 7925875d09b7..196573f4ec48 100644
--- a/drivers/media/v4l2-core/v4l2-async.c
+++ b/drivers/media/v4l2-core/v4l2-async.c
@@ -650,6 +650,82 @@ int v4l2_async_notifier_add_subdev(struct v4l2_async_notifier *notifier,
 }
 EXPORT_SYMBOL_GPL(v4l2_async_notifier_add_subdev);
 
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_fwnode_subdev(struct v4l2_async_notifier *notifier,
+				      struct fwnode_handle *fwnode,
+				      unsigned int asd_struct_size)
+{
+	struct v4l2_async_subdev *asd;
+	int ret;
+
+	asd = kzalloc(asd_struct_size, GFP_KERNEL);
+	if (!asd)
+		return ERR_PTR(-ENOMEM);
+
+	asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
+	asd->match.fwnode = fwnode;
+
+	ret = v4l2_async_notifier_add_subdev(notifier, asd);
+	if (ret) {
+		kfree(asd);
+		return ERR_PTR(ret);
+	}
+
+	return asd;
+}
+EXPORT_SYMBOL_GPL(v4l2_async_notifier_add_fwnode_subdev);
+
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_i2c_subdev(struct v4l2_async_notifier *notifier,
+				   int adapter_id, unsigned short address,
+				   unsigned int asd_struct_size)
+{
+	struct v4l2_async_subdev *asd;
+	int ret;
+
+	asd = kzalloc(asd_struct_size, GFP_KERNEL);
+	if (!asd)
+		return ERR_PTR(-ENOMEM);
+
+	asd->match_type = V4L2_ASYNC_MATCH_I2C;
+	asd->match.i2c.adapter_id = adapter_id;
+	asd->match.i2c.address = address;
+
+	ret = v4l2_async_notifier_add_subdev(notifier, asd);
+	if (ret) {
+		kfree(asd);
+		return ERR_PTR(ret);
+	}
+
+	return asd;
+}
+EXPORT_SYMBOL_GPL(v4l2_async_notifier_add_i2c_subdev);
+
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_devname_subdev(struct v4l2_async_notifier *notifier,
+				       const char *device_name,
+				       unsigned int asd_struct_size)
+{
+	struct v4l2_async_subdev *asd;
+	int ret;
+
+	asd = kzalloc(asd_struct_size, GFP_KERNEL);
+	if (!asd)
+		return ERR_PTR(-ENOMEM);
+
+	asd->match_type = V4L2_ASYNC_MATCH_DEVNAME;
+	asd->match.device_name = device_name;
+
+	ret = v4l2_async_notifier_add_subdev(notifier, asd);
+	if (ret) {
+		kfree(asd);
+		return ERR_PTR(ret);
+	}
+
+	return asd;
+}
+EXPORT_SYMBOL_GPL(v4l2_async_notifier_add_devname_subdev);
+
 int v4l2_async_register_subdev(struct v4l2_subdev *sd)
 {
 	struct v4l2_async_notifier *subdev_notifier;
diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h
index ab4d7acb7960..3489e4ccb29b 100644
--- a/include/media/v4l2-async.h
+++ b/include/media/v4l2-async.h
@@ -174,6 +174,68 @@ void v4l2_async_notifier_init(struct v4l2_async_notifier *notifier);
 int v4l2_async_notifier_add_subdev(struct v4l2_async_notifier *notifier,
 				   struct v4l2_async_subdev *asd);
 
+/**
+ * v4l2_async_notifier_add_fwnode_subdev - Allocate and add a fwnode async
+ *				subdev to the notifier's master asd_list.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ * @fwnode: fwnode handle of the sub-device to be matched
+ * @asd_struct_size: size of the driver's async sub-device struct, including
+ *		     sizeof(struct v4l2_async_subdev). The &struct
+ *		     v4l2_async_subdev shall be the first member of
+ *		     the driver's async sub-device struct, i.e. both
+ *		     begin at the same memory address.
+ *
+ * This can be used before registering a notifier to add a
+ * fwnode-matched asd to the notifiers master asd_list. If the caller
+ * uses this method to compose an asd list, it must never allocate
+ * or place asd's in the @subdevs array.
+ */
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_fwnode_subdev(struct v4l2_async_notifier *notifier,
+				      struct fwnode_handle *fwnode,
+				      unsigned int asd_struct_size);
+
+/**
+ * v4l2_async_notifier_add_i2c_subdev - Allocate and add an i2c async
+ *				subdev to the notifier's master asd_list.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ * @adapter_id: I2C adapter ID to be matched
+ * @address: I2C address of sub-device to be matched
+ * @asd_struct_size: size of the driver's async sub-device struct, including
+ *		     sizeof(struct v4l2_async_subdev). The &struct
+ *		     v4l2_async_subdev shall be the first member of
+ *		     the driver's async sub-device struct, i.e. both
+ *		     begin at the same memory address.
+ *
+ * Same as above but for I2C matched sub-devices.
+ */
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_i2c_subdev(struct v4l2_async_notifier *notifier,
+				   int adapter_id, unsigned short address,
+				   unsigned int asd_struct_size);
+
+/**
+ * v4l2_async_notifier_add_devname_subdev - Allocate and add a device-name
+ *				async subdev to the notifier's master asd_list.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ * @device_name: device name string to be matched
+ * @asd_struct_size: size of the driver's async sub-device struct, including
+ *		     sizeof(struct v4l2_async_subdev). The &struct
+ *		     v4l2_async_subdev shall be the first member of
+ *		     the driver's async sub-device struct, i.e. both
+ *		     begin at the same memory address.
+ *
+ * Same as above but for device-name matched sub-devices.
+ */
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_devname_subdev(struct v4l2_async_notifier *notifier,
+				       const char *device_name,
+				       unsigned int asd_struct_size);
+
+
 /**
  * v4l2_async_notifier_register - registers a subdevice asynchronous notifier
  *
-- 
2.17.1


      parent reply	other threads:[~2018-09-29 18:42 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20180929184052.19479-1-steve_longerbeam@mentor.com>
2018-09-29 18:40 ` [PATCH v7 01/17] media: v4l2-fwnode: ignore endpoints that have no remote port parent Steve Longerbeam
2018-09-29 18:40 ` [PATCH v7 02/17] media: v4l2: async: Allow searching for asd of any type Steve Longerbeam
2018-09-29 18:40 ` [PATCH v7 03/17] media: v4l2: async: Add v4l2_async_notifier_add_subdev Steve Longerbeam
2018-09-29 18:40 ` Steve Longerbeam [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180929184052.19479-5-steve_longerbeam@mentor.com \
    --to=steve_longerbeam@mentor.com \
    --cc=hans.verkuil@cisco.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).