linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
To: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Zhouyang Jia <jiazhouyang09@gmail.com>,
	linux-mtd@lists.infradead.org,
	open list <linux-kernel@vger.kernel.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Subject: [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod
Date: Mon,  1 Oct 2018 14:43:49 +0200	[thread overview]
Message-ID: <20181001124351.31615-6-ricardo.ribalda@gmail.com> (raw)
In-Reply-To: <20181001124351.31615-1-ricardo.ribalda@gmail.com>

Convert from legacy gpio API to gpiod.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
 drivers/mtd/maps/gpio-addr-flash.c | 45 ++++++++++++++++++------------
 1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 47b12a6fead4..c6fe1de33a82 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -33,16 +34,14 @@
  * struct async_state - keep GPIO flash state
  *	@mtd:         MTD state for this mapping
  *	@map:         MTD map state for this flash
- *	@gpio_count:  number of GPIOs used to address
- *	@gpio_addrs:  array of GPIOs to twiddle
+ *	@gpios:       Struct containing the array of GPIO descriptors
  *	@gpio_values: cached GPIO values
  *	@win_order:   dedicated memory size (if no GPIOs)
  */
 struct async_state {
 	struct mtd_info *mtd;
 	struct map_info map;
-	size_t gpio_count;
-	unsigned *gpio_addrs;
+	struct gpio_descs *gpios;
 	unsigned int gpio_values;
 	unsigned int win_order;
 };
@@ -66,11 +65,11 @@ static void gf_set_gpios(struct async_state *state, unsigned long ofs)
 	if (ofs == state->gpio_values)
 		return;
 
-	for (i = 0; i < state->gpio_count; i++) {
+	for (i = 0; i < state->gpios->ndescs; i++) {
 		if ((ofs & BIT(i)) == (state->gpio_values & BIT(i)))
 			continue;
 
-		gpio_set_value(state->gpio_addrs[i], !!(ofs & BIT(i)));
+		gpiod_set_value(state->gpios->desc[i], !!(ofs & BIT(i)));
 	}
 
 	state->gpio_values = ofs;
@@ -222,12 +221,17 @@ static int gpio_flash_probe(struct platform_device *pdev)
 	if (!state)
 		return -ENOMEM;
 
-	/*
-	 * We cast start/end to known types in the boards file, so cast
-	 * away their pointer types here to the known types (gpios->xxx).
-	 */
-	state->gpio_count     = gpios->end;
-	state->gpio_addrs     = (void *)(unsigned long)gpios->start;
+	state->gpios = devm_kzalloc(&pdev->dev,
+			sizeof(*state->gpios) +
+			gpios->end * sizeof(state->gpios->desc[0]),
+			GFP_KERNEL);
+	if (!state->gpios)
+		return -ENOMEM;
+	state->gpios->ndescs = gpios->end;
+
+	if (!state->gpios->desc)
+		return -ENOMEM;
+
 	state->win_order      = get_bitmask_order(resource_size(memory)) - 1;
 
 	state->map.name       = DRIVER_NAME;
@@ -236,7 +240,7 @@ static int gpio_flash_probe(struct platform_device *pdev)
 	state->map.write      = gf_write;
 	state->map.copy_to    = gf_copy_to;
 	state->map.bankwidth  = pdata->width;
-	state->map.size       = BIT(state->win_order + state->gpio_count);
+	state->map.size       = BIT(state->win_order + state->gpios->ndescs);
 	state->map.virt	      = devm_ioremap_resource(&pdev->dev, memory);
 	if (IS_ERR(state->map.virt))
 		return PTR_ERR(state->map.virt);
@@ -248,14 +252,19 @@ static int gpio_flash_probe(struct platform_device *pdev)
 
 	i = 0;
 	do {
-		if (devm_gpio_request(&pdev->dev, state->gpio_addrs[i],
-				      DRIVER_NAME)) {
+		unsigned int *gpio_id = (unsigned int *)gpios->start;
+
+		if (devm_gpio_request_one(&pdev->dev, gpio_id[i], GPIOD_OUT_LOW,
+					DRIVER_NAME)) {
 			dev_err(&pdev->dev, "failed to request gpio %d\n",
-				state->gpio_addrs[i]);
+				gpio_id[i]);
 			return -EBUSY;
 		}
-		gpio_direction_output(state->gpio_addrs[i], 0);
-	} while (++i < state->gpio_count);
+
+		state->gpios->desc[i] = gpio_to_desc(gpio_id[i]);
+		if (!state->gpios->desc[i])
+			return -EINVAL;
+	} while (++i < state->gpios->ndescs);
 
 	dev_notice(&pdev->dev, "probing %d-bit flash bus\n",
 		   state->map.bankwidth * 8);
-- 
2.19.0


  parent reply	other threads:[~2018-10-01 12:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-01 12:43 [PATCH v4 1/8] mtd: maps: gpio-addr-flash: Replace custom printk Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 2/8] mtd: maps: gpio-addr-flash: Fix ioremapped size Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 3/8] mtd: maps: gpio-addr-flash: Use devm_* functions Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 4/8] mtd: maps: gpio-addr-flash: Use order insted of size Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer Ricardo Ribalda Delgado
2018-10-01 12:43 ` Ricardo Ribalda Delgado [this message]
2018-10-03 15:11   ` [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod Boris Brezillon
2018-10-03 15:17     ` Boris Brezillon
2018-10-03 15:56       ` Ricardo Ribalda Delgado
2018-10-03 16:58         ` Boris Brezillon
2018-10-01 12:43 ` [PATCH v4 7/8] dt-binding: mtd: Document gpio-addr-flash Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 8/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices Ricardo Ribalda Delgado
2018-10-03 17:01   ` Boris Brezillon
2018-10-03 19:34     ` Ricardo Ribalda Delgado

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181001124351.31615-6-ricardo.ribalda@gmail.com \
    --to=ricardo.ribalda@gmail.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=jiazhouyang09@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).