linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Wolfram Sang <wsa@the-dreams.de>,
	linux-i2c@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
	linux-doc@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Arnd Bergmann <arnd@arndb.de>
Cc: Przemyslaw Sroka <psroka@cadence.com>,
	Arkadiusz Golec <agolec@cadence.com>,
	Alan Douglas <adouglas@cadence.com>,
	Bartosz Folta <bfolta@cadence.com>, Damian Kos <dkos@cadence.com>,
	Alicja Jurasik-Urbaniak <alicja@cadence.com>,
	Cyprian Wronka <cwronka@cadence.com>,
	Suresh Punnoose <sureshp@cadence.com>,
	Rafal Ciepiela <rafalc@cadence.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Vitor Soares <Vitor.Soares@synopsys.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Xiang Lin <Xiang.Lin@synaptics.com>,
	linux-gpio@vger.kernel.org, Sekhar Nori <nsekhar@ti.com>,
	Przemyslaw Gaj <pgaj@cadence.com>, Peter Rosin <peda@axentia.se>,
	Mike Shettel <mshettel@codeaurora.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Boris Brezillon <boris.brezillon@bootlin.com>
Subject: [PATCH v8 03/10] i3c: Add sysfs ABI spec
Date: Wed,  3 Oct 2018 15:22:05 +0200	[thread overview]
Message-ID: <20181003132212.12619-4-boris.brezillon@bootlin.com> (raw)
In-Reply-To: <20181003132212.12619-1-boris.brezillon@bootlin.com>

Document sysfs files/directories/symlinks exposed by the I3C subsystem.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v8:
- None

Changes in v7:
- Bump KernelVersion to 4.20
- Add new entries under i3c-<bus-id> now that the master controller is
  no longer represented as a device under this directory but implicitly
  represented by the bus object

Changes in v6:
- none

Changes in v5:
- Fix the kernel version
- Rename address into dynamic_address to match changes done in the code

Changes in v4:
- none

Changes in v3:
- none

Changes in v2:
- new patch
---
 Documentation/ABI/testing/sysfs-bus-i3c | 146 ++++++++++++++++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c

diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
new file mode 100644
index 000000000000..d7c7485b0c17
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i3c
@@ -0,0 +1,146 @@
+What:		/sys/bus/i3c/devices/i3c-<bus-id>
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		An I3C bus. This directory will contain one sub-directory per
+		I3C device present on the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/current_master
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Expose the master that owns the bus (<bus-id>-<master-pid>) at
+		the time this file is read. Note that bus ownership can change
+		overtime, so there's no guarantee that when the read() call
+		returns, the value returned is still valid.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/mode
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		I3C bus mode. Can be "pure", "mixed-fast" or "mixed-slow". See
+		the I3C specification for a detailed description of what each
+		of these modes implies.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/i3c_scl_frequency
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		The frequency (expressed in Hz) of the SCL signal when
+		operating in I3C SDR mode.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/i2c_scl_frequency
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		The frequency (expressed in Hz) of the SCL signal when
+		operating in I2C mode.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/dynamic_address
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Dynamic address assigned to the master controller. This
+		address may change if the bus is re-initialized.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/bcr
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		BCR stands for Bus Characteristics Register and express the
+		device capabilities in term of speed, maximum read/write
+		length, etc. See the I3C specification for more details.
+		This entry describes the BCR of the master controller driving
+		the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/dcr
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		DCR stands for Device Characteristics Register and express the
+		device capabilities in term of exposed features. See the I3C
+		specification for more details.
+		This entry describes the DCR of the master controller driving
+		the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/pid
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		PID stands for Provisional ID and is used to uniquely identify
+		a device on a bus. This PID contains information about the
+		vendor, the part and an instance ID so that several devices of
+		the same type can be connected on the same bus.
+		See the I3C specification for more details.
+		This entry describes the PID of the master controller driving
+		the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/hdrcap
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Expose the HDR (High Data Rate) capabilities of a device.
+		Returns a list of supported HDR mode, each element is separated
+		by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
+		See the I3C specification for more details about these HDR
+		modes.
+		This entry describes the HDRCAP of the master controller
+		driving the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		An I3C device present on I3C bus identified by <bus-id>. Note
+		that all devices are represented including the master driving
+		the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dynamic_address
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Dynamic address assigned to device <bus-id>-<device-pid>. This
+		address may change if the bus is re-initialized.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/bcr
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		BCR stands for Bus Characteristics Register and express the
+		device capabilities in term of speed, maximum read/write
+		length, etc. See the I3C specification for more details.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dcr
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		DCR stands for Device Characteristics Register and express the
+		device capabilities in term of exposed features. See the I3C
+		specification for more details.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		PID stands for Provisional ID and is used to uniquely identify
+		a device on a bus. This PID contains information about the
+		vendor, the part and an instance ID so that several devices of
+		the same type can be connected on the same bus.
+		See the I3C specification for more details.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/hdrcap
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Expose the HDR (High Data Rate) capabilities of a device.
+		Returns a list of supported HDR mode, each element is separated
+		by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
+		See the I3C specification for more details about these HDR
+		modes.
+
+What:		/sys/bus/i3c/devices/<bus-id>-<device-pid>
+KernelVersion:  4.20
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		These directories are just symbolic links to
+		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>.
-- 
2.14.1


  parent reply	other threads:[~2018-10-03 13:22 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-03 13:22 [PATCH v8 00/10] Add the I3C subsystem Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 01/10] i3c: Add core I3C infrastructure Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 02/10] docs: driver-api: Add I3C documentation Boris Brezillon
2018-10-03 13:22 ` Boris Brezillon [this message]
2018-10-03 13:22 ` [PATCH v8 04/10] dt-bindings: i3c: Document core bindings Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property Boris Brezillon
2018-10-03 18:37   ` Joe Perches
2018-10-03 18:45     ` Geert Uytterhoeven
2018-10-03 19:02       ` Joe Perches
2018-10-03 18:59     ` Boris Brezillon
2018-10-03 19:06       ` Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 07/10] i3c: master: Add driver for Cadence IP Boris Brezillon
2018-10-08 10:06   ` Arnd Bergmann
2018-10-08 10:21     ` Boris Brezillon
2018-10-08 10:36       ` Arnd Bergmann
2018-10-08 12:05         ` Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 08/10] dt-bindings: i3c: Document Cadence I3C master bindings Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 09/10] gpio: Add a driver for Cadence I3C GPIO expander Boris Brezillon
2018-10-03 13:22 ` [PATCH v8 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander Boris Brezillon
2018-10-04  8:35   ` Linus Walleij
2018-10-08 10:47 ` [PATCH v8 00/10] Add the I3C subsystem Arnd Bergmann
2018-10-17 13:18   ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181003132212.12619-4-boris.brezillon@bootlin.com \
    --to=boris.brezillon@bootlin.com \
    --cc=Vitor.Soares@synopsys.com \
    --cc=Xiang.Lin@synaptics.com \
    --cc=adouglas@cadence.com \
    --cc=agolec@cadence.com \
    --cc=alicja@cadence.com \
    --cc=arnd@arndb.de \
    --cc=bfolta@cadence.com \
    --cc=corbet@lwn.net \
    --cc=cwronka@cadence.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dkos@cadence.com \
    --cc=galak@codeaurora.org \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mshettel@codeaurora.org \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=pawel.moll@arm.com \
    --cc=peda@axentia.se \
    --cc=pgaj@cadence.com \
    --cc=psroka@cadence.com \
    --cc=rafalc@cadence.com \
    --cc=robh+dt@kernel.org \
    --cc=sureshp@cadence.com \
    --cc=swboyd@chromium.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).