linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v6 2/2] [media] imx214: Add imx214 camera sensor driver
@ 2018-10-04 10:11 Ricardo Ribalda Delgado
  2018-10-04 10:57 ` Sakari Ailus
  0 siblings, 1 reply; 2+ messages in thread
From: Ricardo Ribalda Delgado @ 2018-10-04 10:11 UTC (permalink / raw)
  To: Hans Verkuil, Laurent Pinchart, Sakari Ailus,
	Mauro Carvalho Chehab, linux-kernel, linux-media, jacopo
  Cc: Ricardo Ribalda Delgado

Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.

Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
Changelog from v5:

Sakari Ailus (Thanks!):
- depends on V4L2_FWNODE
- Serialize get_format/set_format/get_selection
- runtime_pm: set_power_on/off
- Fix set-ctrl -EINVAL
- Reorted ret variable

 MAINTAINERS                |    8 +
 drivers/media/i2c/Kconfig  |   12 +
 drivers/media/i2c/Makefile |    1 +
 drivers/media/i2c/imx214.c | 1126 ++++++++++++++++++++++++++++++++++++
 4 files changed, 1147 insertions(+)
 create mode 100644 drivers/media/i2c/imx214.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 9989925f658d..2ae68894e700 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13521,6 +13521,14 @@ S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
+SONY IMX214 SENSOR DRIVER
+M:	Ricardo Ribalda <ricardo.ribalda@gmail.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/i2c/imx214.c
+F:	Documentation/devicetree/bindings/media/i2c/imx214.txt
+
 SONY IMX258 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index bfdb494686bf..d7e69ca0976c 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -595,6 +595,18 @@ config VIDEO_APTINA_PLL
 config VIDEO_SMIAPP_PLL
 	tristate
 
+config VIDEO_IMX214
+	tristate "Sony IMX214 sensor support"
+	depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	depends on V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the Sony
+	  IMX214 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx214.
+
 config VIDEO_IMX258
 	tristate "Sony IMX258 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index a94eb03d10d4..61305edc6165 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C)		+= video-i2c.o
 obj-$(CONFIG_VIDEO_ML86V7667)	+= ml86v7667.o
 obj-$(CONFIG_VIDEO_OV2659)	+= ov2659.o
 obj-$(CONFIG_VIDEO_TC358743)	+= tc358743.o
+obj-$(CONFIG_VIDEO_IMX214)	+= imx214.o
 obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
 obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
 
diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
new file mode 100644
index 000000000000..33883c91d54d
--- /dev/null
+++ b/drivers/media/i2c/imx214.c
@@ -0,0 +1,1126 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * imx214.c - imx214 sensor driver
+ *
+ * Copyright 2018 Qtechnology A/S
+ *
+ * Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define IMX214_DEFAULT_CLK_FREQ	24000000
+#define IMX214_DEFAULT_LINK_FREQ 480000000
+#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
+#define IMX214_WIDTH 4096
+#define IMX214_HEIGHT 2304
+#define IMX214_FPS 30
+#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
+
+static const char * const imx214_supply_name[] = {
+	"vdda",
+	"vddd",
+	"vdddo",
+};
+
+#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
+
+struct imx214 {
+	struct device *dev;
+	struct clk *xclk;
+	struct regmap *regmap;
+
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+	struct v4l2_mbus_framefmt fmt;
+	struct v4l2_rect crop;
+
+	struct v4l2_ctrl_handler ctrls;
+	struct v4l2_ctrl *pixel_rate;
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *exposure;
+
+	struct regulator_bulk_data	supplies[IMX214_NUM_SUPPLIES];
+
+	struct gpio_desc *enable_gpio;
+
+	struct mutex mutex;
+
+	bool streaming;
+	bool is_on;
+};
+
+struct reg_8 {
+	u16 addr;
+	u8 val;
+};
+
+enum {
+	IMX214_TABLE_WAIT_MS = 0,
+	IMX214_TABLE_END,
+	IMX214_MAX_RETRIES,
+	IMX214_WAIT_MS
+};
+
+/*From imx214_mode_tbls.h*/
+static const struct reg_8 mode_4096x2304[] = {
+	{0x0114, 0x03},
+	{0x0220, 0x00},
+	{0x0221, 0x11},
+	{0x0222, 0x01},
+	{0x0340, 0x0C},
+	{0x0341, 0x7A},
+	{0x0342, 0x13},
+	{0x0343, 0x90},
+	{0x0344, 0x00},
+	{0x0345, 0x38},
+	{0x0346, 0x01},
+	{0x0347, 0x98},
+	{0x0348, 0x10},
+	{0x0349, 0x37},
+	{0x034A, 0x0A},
+	{0x034B, 0x97},
+	{0x0381, 0x01},
+	{0x0383, 0x01},
+	{0x0385, 0x01},
+	{0x0387, 0x01},
+	{0x0900, 0x00},
+	{0x0901, 0x00},
+	{0x0902, 0x00},
+	{0x3000, 0x35},
+	{0x3054, 0x01},
+	{0x305C, 0x11},
+
+	{0x0112, 0x0A},
+	{0x0113, 0x0A},
+	{0x034C, 0x10},
+	{0x034D, 0x00},
+	{0x034E, 0x09},
+	{0x034F, 0x00},
+	{0x0401, 0x00},
+	{0x0404, 0x00},
+	{0x0405, 0x10},
+	{0x0408, 0x00},
+	{0x0409, 0x00},
+	{0x040A, 0x00},
+	{0x040B, 0x00},
+	{0x040C, 0x10},
+	{0x040D, 0x00},
+	{0x040E, 0x09},
+	{0x040F, 0x00},
+
+	{0x0301, 0x05},
+	{0x0303, 0x02},
+	{0x0305, 0x03},
+	{0x0306, 0x00},
+	{0x0307, 0x96},
+	{0x0309, 0x0A},
+	{0x030B, 0x01},
+	{0x0310, 0x00},
+
+	{0x0820, 0x12},
+	{0x0821, 0xC0},
+	{0x0822, 0x00},
+	{0x0823, 0x00},
+
+	{0x3A03, 0x09},
+	{0x3A04, 0x50},
+	{0x3A05, 0x01},
+
+	{0x0B06, 0x01},
+	{0x30A2, 0x00},
+
+	{0x30B4, 0x00},
+
+	{0x3A02, 0xFF},
+
+	{0x3011, 0x00},
+	{0x3013, 0x01},
+
+	{0x0202, 0x0C},
+	{0x0203, 0x70},
+	{0x0224, 0x01},
+	{0x0225, 0xF4},
+
+	{0x0204, 0x00},
+	{0x0205, 0x00},
+	{0x020E, 0x01},
+	{0x020F, 0x00},
+	{0x0210, 0x01},
+	{0x0211, 0x00},
+	{0x0212, 0x01},
+	{0x0213, 0x00},
+	{0x0214, 0x01},
+	{0x0215, 0x00},
+	{0x0216, 0x00},
+	{0x0217, 0x00},
+
+	{0x4170, 0x00},
+	{0x4171, 0x10},
+	{0x4176, 0x00},
+	{0x4177, 0x3C},
+	{0xAE20, 0x04},
+	{0xAE21, 0x5C},
+
+	{IMX214_TABLE_WAIT_MS, 10},
+	{0x0138, 0x01},
+	{IMX214_TABLE_END, 0x00}
+};
+
+static const struct reg_8 mode_1920x1080[] = {
+	{0x0114, 0x03},
+	{0x0220, 0x00},
+	{0x0221, 0x11},
+	{0x0222, 0x01},
+	{0x0340, 0x0C},
+	{0x0341, 0x7A},
+	{0x0342, 0x13},
+	{0x0343, 0x90},
+	{0x0344, 0x04},
+	{0x0345, 0x78},
+	{0x0346, 0x03},
+	{0x0347, 0xFC},
+	{0x0348, 0x0B},
+	{0x0349, 0xF7},
+	{0x034A, 0x08},
+	{0x034B, 0x33},
+	{0x0381, 0x01},
+	{0x0383, 0x01},
+	{0x0385, 0x01},
+	{0x0387, 0x01},
+	{0x0900, 0x00},
+	{0x0901, 0x00},
+	{0x0902, 0x00},
+	{0x3000, 0x35},
+	{0x3054, 0x01},
+	{0x305C, 0x11},
+
+	{0x0112, 0x0A},
+	{0x0113, 0x0A},
+	{0x034C, 0x07},
+	{0x034D, 0x80},
+	{0x034E, 0x04},
+	{0x034F, 0x38},
+	{0x0401, 0x00},
+	{0x0404, 0x00},
+	{0x0405, 0x10},
+	{0x0408, 0x00},
+	{0x0409, 0x00},
+	{0x040A, 0x00},
+	{0x040B, 0x00},
+	{0x040C, 0x07},
+	{0x040D, 0x80},
+	{0x040E, 0x04},
+	{0x040F, 0x38},
+
+	{0x0301, 0x05},
+	{0x0303, 0x02},
+	{0x0305, 0x03},
+	{0x0306, 0x00},
+	{0x0307, 0x96},
+	{0x0309, 0x0A},
+	{0x030B, 0x01},
+	{0x0310, 0x00},
+
+	{0x0820, 0x12},
+	{0x0821, 0xC0},
+	{0x0822, 0x00},
+	{0x0823, 0x00},
+
+	{0x3A03, 0x04},
+	{0x3A04, 0xF8},
+	{0x3A05, 0x02},
+
+	{0x0B06, 0x01},
+	{0x30A2, 0x00},
+
+	{0x30B4, 0x00},
+
+	{0x3A02, 0xFF},
+
+	{0x3011, 0x00},
+	{0x3013, 0x01},
+
+	{0x0202, 0x0C},
+	{0x0203, 0x70},
+	{0x0224, 0x01},
+	{0x0225, 0xF4},
+
+	{0x0204, 0x00},
+	{0x0205, 0x00},
+	{0x020E, 0x01},
+	{0x020F, 0x00},
+	{0x0210, 0x01},
+	{0x0211, 0x00},
+	{0x0212, 0x01},
+	{0x0213, 0x00},
+	{0x0214, 0x01},
+	{0x0215, 0x00},
+	{0x0216, 0x00},
+	{0x0217, 0x00},
+
+	{0x4170, 0x00},
+	{0x4171, 0x10},
+	{0x4176, 0x00},
+	{0x4177, 0x3C},
+	{0xAE20, 0x04},
+	{0xAE21, 0x5C},
+
+	{IMX214_TABLE_WAIT_MS, 10},
+	{0x0138, 0x01},
+	{IMX214_TABLE_END, 0x00}
+};
+
+static const struct reg_8 mode_table_common[] = {
+	/* software reset */
+
+	/* software standby settings */
+	{0x0100, 0x00},
+
+	/* ATR setting */
+	{0x9300, 0x02},
+
+	/* external clock setting */
+	{0x0136, 0x18},
+	{0x0137, 0x00},
+
+	/* global setting */
+	/* basic config */
+	{0x0101, 0x00},
+	{0x0105, 0x01},
+	{0x0106, 0x01},
+	{0x4550, 0x02},
+	{0x4601, 0x00},
+	{0x4642, 0x05},
+	{0x6227, 0x11},
+	{0x6276, 0x00},
+	{0x900E, 0x06},
+	{0xA802, 0x90},
+	{0xA803, 0x11},
+	{0xA804, 0x62},
+	{0xA805, 0x77},
+	{0xA806, 0xAE},
+	{0xA807, 0x34},
+	{0xA808, 0xAE},
+	{0xA809, 0x35},
+	{0xA80A, 0x62},
+	{0xA80B, 0x83},
+	{0xAE33, 0x00},
+
+	/* analog setting */
+	{0x4174, 0x00},
+	{0x4175, 0x11},
+	{0x4612, 0x29},
+	{0x461B, 0x12},
+	{0x461F, 0x06},
+	{0x4635, 0x07},
+	{0x4637, 0x30},
+	{0x463F, 0x18},
+	{0x4641, 0x0D},
+	{0x465B, 0x12},
+	{0x465F, 0x11},
+	{0x4663, 0x11},
+	{0x4667, 0x0F},
+	{0x466F, 0x0F},
+	{0x470E, 0x09},
+	{0x4909, 0xAB},
+	{0x490B, 0x95},
+	{0x4915, 0x5D},
+	{0x4A5F, 0xFF},
+	{0x4A61, 0xFF},
+	{0x4A73, 0x62},
+	{0x4A85, 0x00},
+	{0x4A87, 0xFF},
+
+	/* embedded data */
+	{0x5041, 0x04},
+	{0x583C, 0x04},
+	{0x620E, 0x04},
+	{0x6EB2, 0x01},
+	{0x6EB3, 0x00},
+	{0x9300, 0x02},
+
+	/* imagequality */
+	/* HDR setting */
+	{0x3001, 0x07},
+	{0x6D12, 0x3F},
+	{0x6D13, 0xFF},
+	{0x9344, 0x03},
+	{0x9706, 0x10},
+	{0x9707, 0x03},
+	{0x9708, 0x03},
+	{0x9E04, 0x01},
+	{0x9E05, 0x00},
+	{0x9E0C, 0x01},
+	{0x9E0D, 0x02},
+	{0x9E24, 0x00},
+	{0x9E25, 0x8C},
+	{0x9E26, 0x00},
+	{0x9E27, 0x94},
+	{0x9E28, 0x00},
+	{0x9E29, 0x96},
+
+	/* CNR parameter setting */
+	{0x69DB, 0x01},
+
+	/* Moire reduction */
+	{0x6957, 0x01},
+
+	/* image enhancment */
+	{0x6987, 0x17},
+	{0x698A, 0x03},
+	{0x698B, 0x03},
+
+	/* white balanace */
+	{0x0B8E, 0x01},
+	{0x0B8F, 0x00},
+	{0x0B90, 0x01},
+	{0x0B91, 0x00},
+	{0x0B92, 0x01},
+	{0x0B93, 0x00},
+	{0x0B94, 0x01},
+	{0x0B95, 0x00},
+
+	/* ATR setting */
+	{0x6E50, 0x00},
+	{0x6E51, 0x32},
+	{0x9340, 0x00},
+	{0x9341, 0x3C},
+	{0x9342, 0x03},
+	{0x9343, 0xFF},
+	{IMX214_TABLE_END, 0x00}
+};
+
+/*
+ * Declare modes in order, from biggest
+ * to smallest height.
+ */
+static const struct imx214_mode {
+	u32 width;
+	u32 height;
+	const struct reg_8 *reg_table;
+} imx214_modes[] = {
+	{
+		.width = 4096,
+		.height = 2304,
+		.reg_table = mode_4096x2304,
+	},
+	{
+		.width = 1920,
+		.height = 1080,
+		.reg_table = mode_1920x1080,
+	},
+};
+
+static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct imx214, sd);
+}
+
+static int __maybe_unused imx214_power_on(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx214 *imx214 = to_imx214(sd);
+	int ret;
+
+	if (imx214->is_on)
+		return 0;
+
+	ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
+	if (ret < 0) {
+		dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	usleep_range(2000, 3000);
+
+	ret = clk_prepare_enable(imx214->xclk);
+	if (ret < 0) {
+		regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
+		dev_err(imx214->dev, "clk prepare enable failed\n");
+		return ret;
+	}
+
+	gpiod_set_value_cansleep(imx214->enable_gpio, 1);
+	usleep_range(12000, 15000);
+
+	imx214->is_on = true;
+
+	return 0;
+}
+
+static int __maybe_unused imx214_power_off(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx214 *imx214 = to_imx214(sd);
+
+	if (!imx214->is_on)
+		return 0;
+
+	gpiod_set_value_cansleep(imx214->enable_gpio, 0);
+
+	clk_disable_unprepare(imx214->xclk);
+
+	regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
+	usleep_range(10, 20);
+
+	imx214->is_on = false;
+
+	return 0;
+}
+
+static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index > 0)
+		return -EINVAL;
+
+	code->code = IMX214_MBUS_CODE;
+
+	return 0;
+}
+
+static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_pad_config *cfg,
+				  struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (fse->code != IMX214_MBUS_CODE)
+		return -EINVAL;
+
+	if (fse->index >= ARRAY_SIZE(imx214_modes))
+		return -EINVAL;
+
+	fse->min_width = fse->max_width = imx214_modes[fse->index].width;
+	fse->min_height = fse->max_height = imx214_modes[fse->index].height;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int imx214_s_register(struct v4l2_subdev *subdev,
+			      const struct v4l2_dbg_register *reg)
+{
+	struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+
+	return regmap_write(imx214->regmap, reg->reg, reg->val);
+}
+
+static int imx214_g_register(struct v4l2_subdev *subdev,
+			      struct v4l2_dbg_register *reg)
+{
+	struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+	unsigned int aux;
+	int ret;
+
+	reg->size = 1;
+	ret = regmap_read(imx214->regmap, reg->reg, &aux);
+	reg->val = aux;
+
+	return ret;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops imx214_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = imx214_g_register,
+	.s_register = imx214_s_register,
+#endif
+};
+
+static struct v4l2_mbus_framefmt *
+__imx214_get_pad_format(struct imx214 *imx214,
+			struct v4l2_subdev_pad_config *cfg,
+			unsigned int pad,
+			enum v4l2_subdev_format_whence which)
+{
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_TRY:
+		return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &imx214->fmt;
+	default:
+		return NULL;
+	}
+}
+
+static int imx214_get_format(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_format *format)
+{
+	struct imx214 *imx214 = to_imx214(sd);
+
+	mutex_lock(&imx214->mutex);
+	format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
+						  format->which);
+	mutex_unlock(&imx214->mutex);
+
+	return 0;
+}
+
+static struct v4l2_rect *
+__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
+		      unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_TRY:
+		return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &imx214->crop;
+	default:
+		return NULL;
+	}
+}
+
+static int imx214_set_format(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_format *format)
+{
+	struct imx214 *imx214 = to_imx214(sd);
+	struct v4l2_mbus_framefmt *__format;
+	struct v4l2_rect *__crop;
+	const struct imx214_mode *mode;
+
+	mutex_lock(&imx214->mutex);
+
+	__crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
+
+	if (format)
+		mode = v4l2_find_nearest_size(imx214_modes,
+				ARRAY_SIZE(imx214_modes), width, height,
+				format->format.width, format->format.height);
+	else
+		mode = &imx214_modes[0];
+
+	__crop->width = mode->width;
+	__crop->height = mode->height;
+
+	__format = __imx214_get_pad_format(imx214, cfg, format->pad,
+					   format->which);
+	__format->width = __crop->width;
+	__format->height = __crop->height;
+	__format->code = IMX214_MBUS_CODE;
+	__format->field = V4L2_FIELD_NONE;
+	__format->colorspace = V4L2_COLORSPACE_SRGB;
+	__format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
+	__format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
+				__format->colorspace, __format->ycbcr_enc);
+	__format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
+
+	format->format = *__format;
+
+	mutex_unlock(&imx214->mutex);
+
+	return 0;
+}
+
+static int imx214_get_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_pad_config *cfg,
+				struct v4l2_subdev_selection *sel)
+{
+	struct imx214 *imx214 = to_imx214(sd);
+
+	if (sel->target != V4L2_SEL_TGT_CROP)
+		return -EINVAL;
+
+	mutex_lock(&imx214->mutex);
+	sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
+					sel->which);
+	mutex_unlock(&imx214->mutex);
+	return 0;
+}
+
+static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_pad_config *cfg)
+{
+	struct v4l2_subdev_format fmt = { };
+
+	fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt.format.width = imx214_modes[0].width;
+	fmt.format.height = imx214_modes[0].height;
+
+	imx214_set_format(subdev, cfg, &fmt);
+
+	return 0;
+}
+
+static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct imx214 *imx214 = container_of(ctrl->handler,
+					     struct imx214, ctrls);
+	u8 vals[2];
+	int ret;
+
+	/*
+	 * Applying V4L2 control value only happens
+	 * when power is up for streaming
+	 */
+	if (!pm_runtime_get_if_in_use(imx214->dev))
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		vals[1] = ctrl->val;
+		vals[0] = ctrl->val >> 8;
+		ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2);
+		if (ret < 0)
+			dev_err(imx214->dev, "Error %d\n", ret);
+		ret = 0;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_put(imx214->dev);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops imx214_ctrl_ops = {
+	.s_ctrl = imx214_set_ctrl,
+};
+
+#define MAX_CMD 4
+static int imx214_write_table(struct imx214 *imx214,
+				const struct reg_8 table[])
+{
+	u8 vals[MAX_CMD];
+	int i;
+	int ret;
+
+	for (table = table; table->addr != IMX214_TABLE_END ; table++) {
+		if (table->addr == IMX214_TABLE_WAIT_MS) {
+			usleep_range(table->val * 1000,
+				     table->val * 1000 + 500);
+			continue;
+		}
+
+		for (i = 0; i < MAX_CMD; i++) {
+			if (table[i].addr != (table[0].addr + i))
+				break;
+			vals[i] = table[i].val;
+		}
+
+		ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
+
+		if (ret) {
+			dev_err(imx214->dev, "write_table error: %d\n", ret);
+			return ret;
+		}
+
+		table += i - 1;
+	}
+
+	return 0;
+}
+
+static int imx214_start_streaming(struct imx214 *imx214)
+{
+	const struct imx214_mode *mode;
+	int ret;
+
+	ret = imx214_write_table(imx214, mode_table_common);
+	if (ret < 0) {
+		dev_err(imx214->dev, "could not sent common table %d\n", ret);
+		return ret;
+	}
+
+	mode = v4l2_find_nearest_size(imx214_modes,
+				ARRAY_SIZE(imx214_modes), width, height,
+				imx214->fmt.width, imx214->fmt.height);
+	ret = imx214_write_table(imx214, mode->reg_table);
+	if (ret < 0) {
+		dev_err(imx214->dev, "could not sent mode table %d\n", ret);
+		return ret;
+	}
+	ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
+	if (ret < 0) {
+		dev_err(imx214->dev, "could not sync v4l2 controls\n");
+		return ret;
+	}
+	ret = regmap_write(imx214->regmap, 0x100, 1);
+	if (ret < 0) {
+		dev_err(imx214->dev, "could not sent start table %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int imx214_stop_streaming(struct imx214 *imx214)
+{
+	int ret;
+
+	ret = regmap_write(imx214->regmap, 0x100, 0);
+	if (ret < 0)
+		dev_err(imx214->dev, "could not sent stop table %d\n",	ret);
+
+	return ret;
+}
+
+static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct imx214 *imx214 = to_imx214(subdev);
+	int ret;
+
+	if (imx214->streaming == enable)
+		return 0;
+
+	if (enable) {
+		ret = pm_runtime_get_sync(imx214->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(imx214->dev);
+			return ret;
+		}
+
+		ret = imx214_start_streaming(imx214);
+		if (ret < 0)
+			goto err_rpm_put;
+	} else {
+		ret = imx214_start_streaming(imx214);
+		if (ret < 0)
+			goto err_rpm_put;
+		pm_runtime_put(imx214->dev);
+	}
+
+	imx214->streaming = enable;
+	return 0;
+
+err_rpm_put:
+	pm_runtime_put(imx214->dev);
+	return ret;
+}
+
+static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_frame_interval *fival)
+{
+	fival->pad = 0;
+	fival->interval.numerator = 1;
+	fival->interval.denominator = IMX214_FPS;
+
+	return 0;
+}
+
+static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_pad_config *cfg,
+				struct v4l2_subdev_frame_interval_enum *fie)
+{
+	const struct imx214_mode *mode;
+
+	if (fie->index != 0)
+		return -EINVAL;
+
+	mode = v4l2_find_nearest_size(imx214_modes,
+				ARRAY_SIZE(imx214_modes), width, height,
+				fie->width, fie->height);
+
+	fie->code = IMX214_MBUS_CODE;
+	fie->width = mode->width;
+	fie->height = mode->height;
+	fie->interval.numerator = 1;
+	fie->interval.denominator = IMX214_FPS;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx214_video_ops = {
+	.s_stream = imx214_s_stream,
+	.g_frame_interval = imx214_g_frame_interval,
+	.s_frame_interval = imx214_g_frame_interval,
+};
+
+static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
+	.enum_mbus_code = imx214_enum_mbus_code,
+	.enum_frame_size = imx214_enum_frame_size,
+	.enum_frame_interval = imx214_enum_frame_interval,
+	.get_fmt = imx214_get_format,
+	.set_fmt = imx214_set_format,
+	.get_selection = imx214_get_selection,
+	.init_cfg = imx214_entity_init_cfg,
+};
+
+static const struct v4l2_subdev_ops imx214_subdev_ops = {
+	.core = &imx214_core_ops,
+	.video = &imx214_video_ops,
+	.pad = &imx214_subdev_pad_ops,
+};
+
+static const struct regmap_config sensor_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
+{
+	unsigned int i;
+
+	for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
+		imx214->supplies[i].supply = imx214_supply_name[i];
+
+	return devm_regulator_bulk_get(dev,
+				       IMX214_NUM_SUPPLIES,
+				       imx214->supplies);
+}
+
+static int imx214_parse_fwnode(struct device *dev)
+{
+	struct fwnode_handle *endpoint;
+	struct v4l2_fwnode_endpoint *bus_cfg;
+	int i;
+	int ret = 0;
+
+	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
+	if (!endpoint) {
+		dev_err(dev, "endpoint node not found\n");
+		return -EINVAL;
+	}
+
+	bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint);
+	if (IS_ERR(bus_cfg)) {
+		dev_err(dev, "parsing endpoint node failed\n");
+		return PTR_ERR(bus_cfg);
+	}
+
+	if (bus_cfg->bus_type != V4L2_MBUS_CSI2) {
+		dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
+			bus_cfg->bus_type, V4L2_MBUS_CSI2);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++)
+		if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
+			break;
+
+	if (i == bus_cfg->nr_of_link_frequencies) {
+		dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
+			IMX214_DEFAULT_LINK_FREQ);
+		ret = -EINVAL;
+		goto done;
+	}
+
+done:
+	v4l2_fwnode_endpoint_free(bus_cfg);
+	fwnode_handle_put(endpoint);
+	return ret;
+}
+
+
+static int __maybe_unused imx214_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx214 *imx214 = to_imx214(sd);
+
+	if (imx214->streaming)
+		imx214_stop_streaming(imx214);
+
+	return 0;
+}
+
+static int __maybe_unused imx214_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx214 *imx214 = to_imx214(sd);
+	int ret;
+
+	if (imx214->streaming) {
+		ret = imx214_start_streaming(imx214);
+		if (ret)
+			goto error;
+	}
+
+	return 0;
+
+error:
+	imx214_stop_streaming(imx214);
+	imx214->streaming = 0;
+	return ret;
+}
+
+static int imx214_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct imx214 *imx214;
+	static const s64 link_freq[] = {
+		IMX214_DEFAULT_LINK_FREQ,
+	};
+	int ret;
+
+	ret = imx214_parse_fwnode(dev);
+	if (ret)
+		return ret;
+
+	imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
+	if (!imx214)
+		return -ENOMEM;
+
+	imx214->dev = dev;
+
+	imx214->xclk = devm_clk_get(dev, NULL);
+	if (IS_ERR(imx214->xclk)) {
+		dev_err(dev, "could not get xclk");
+		return PTR_ERR(imx214->xclk);
+	}
+
+	ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
+	if (ret) {
+		dev_err(dev, "could not set xclk frequency\n");
+		return ret;
+	}
+
+	ret = imx214_get_regulators(dev, imx214);
+	if (ret < 0) {
+		dev_err(dev, "cannot get regulators\n");
+		return ret;
+	}
+
+	imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(imx214->enable_gpio)) {
+		dev_err(dev, "cannot get enable gpio\n");
+		return PTR_ERR(imx214->enable_gpio);
+	}
+
+	imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
+	if (IS_ERR(imx214->regmap)) {
+		dev_err(dev, "regmap init failed\n");
+		return PTR_ERR(imx214->regmap);
+	}
+
+	v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
+	pm_runtime_set_active(imx214->dev);
+	pm_runtime_enable(imx214->dev);
+	pm_runtime_idle(imx214->dev);
+
+	v4l2_ctrl_handler_init(&imx214->ctrls, 3);
+
+	imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
+					       V4L2_CID_PIXEL_RATE, 0,
+					       IMX214_DEFAULT_PIXEL_RATE, 1,
+					       IMX214_DEFAULT_PIXEL_RATE);
+	imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
+						   V4L2_CID_LINK_FREQ,
+						   ARRAY_SIZE(link_freq) - 1,
+						   0, link_freq);
+	if (imx214->link_freq)
+		imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	/*
+	 * WARNING!
+	 * Values obtained reverse engineering blobs and/or devices.
+	 * Ranges and functionality might be wrong.
+	 *
+	 * Sony, please release some register set documentation for the
+	 * device.
+	 *
+	 * Yours sincerely, Ricardo.
+	 */
+	imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
+					     V4L2_CID_EXPOSURE,
+					     0, 0xffff, 1, 0x0c70);
+
+	ret = imx214->ctrls.error;
+	if (ret) {
+		dev_err(&client->dev, "%s control init failed (%d)\n",
+				__func__, ret);
+		goto free_ctrl;
+	}
+
+	imx214->sd.ctrl_handler = &imx214->ctrls;
+	ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
+	if (ret) {
+		dev_err(&client->dev,
+			"Error %d setting default controls\n", ret);
+		goto free_ctrl;
+	}
+
+	imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
+	imx214->sd.dev = &client->dev;
+	imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+	ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
+	if (ret < 0) {
+		dev_err(dev, "could not register media entity\n");
+		goto free_ctrl;
+	}
+
+	mutex_init(&imx214->mutex);
+	imx214_entity_init_cfg(&imx214->sd, NULL);
+
+	ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
+	if (ret < 0) {
+		dev_err(dev, "could not register v4l2 device\n");
+		goto free_entity;
+	}
+
+	return 0;
+
+free_entity:
+	mutex_destroy(&imx214->mutex);
+	media_entity_cleanup(&imx214->sd.entity);
+free_ctrl:
+	v4l2_ctrl_handler_free(&imx214->ctrls);
+	pm_runtime_disable(imx214->dev);
+
+	return ret;
+}
+
+static int imx214_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx214 *imx214 = to_imx214(sd);
+
+	v4l2_async_unregister_subdev(&imx214->sd);
+	media_entity_cleanup(&imx214->sd.entity);
+	v4l2_ctrl_handler_free(&imx214->ctrls);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	mutex_destroy(&imx214->mutex);
+
+	return 0;
+}
+
+static const struct of_device_id imx214_of_match[] = {
+	{ .compatible = "sony,imx214" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, imx214_of_match);
+
+static const struct dev_pm_ops imx214_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(imx214_suspend, imx214_resume)
+	SET_RUNTIME_PM_OPS(imx214_power_off, imx214_power_on, NULL)
+};
+
+static struct i2c_driver imx214_i2c_driver = {
+	.driver = {
+		.of_match_table = imx214_of_match,
+		.pm = &imx214_pm_ops,
+		.name  = "imx214",
+	},
+	.probe_new  = imx214_probe,
+	.remove = imx214_remove,
+};
+
+module_i2c_driver(imx214_i2c_driver);
+
+MODULE_DESCRIPTION("Sony IMX214 Camera drier");
+MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.19.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH v6 2/2] [media] imx214: Add imx214 camera sensor driver
  2018-10-04 10:11 [PATCH v6 2/2] [media] imx214: Add imx214 camera sensor driver Ricardo Ribalda Delgado
@ 2018-10-04 10:57 ` Sakari Ailus
  0 siblings, 0 replies; 2+ messages in thread
From: Sakari Ailus @ 2018-10-04 10:57 UTC (permalink / raw)
  To: Ricardo Ribalda Delgado
  Cc: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
	linux-kernel, linux-media, jacopo

Hi Ricardo,

A few more little comments... it's starting to look good.

On Thu, Oct 04, 2018 at 12:11:59PM +0200, Ricardo Ribalda Delgado wrote:
> Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
> This is a camera sensor using the I2C bus for control and the
> CSI-2 bus for data.
> 
> Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
> 
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
> ---
> Changelog from v5:
> 
> Sakari Ailus (Thanks!):
> - depends on V4L2_FWNODE
> - Serialize get_format/set_format/get_selection
> - runtime_pm: set_power_on/off
> - Fix set-ctrl -EINVAL
> - Reorted ret variable
> 
>  MAINTAINERS                |    8 +
>  drivers/media/i2c/Kconfig  |   12 +
>  drivers/media/i2c/Makefile |    1 +
>  drivers/media/i2c/imx214.c | 1126 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 1147 insertions(+)
>  create mode 100644 drivers/media/i2c/imx214.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9989925f658d..2ae68894e700 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13521,6 +13521,14 @@ S:	Maintained
>  F:	drivers/ssb/
>  F:	include/linux/ssb/
>  
> +SONY IMX214 SENSOR DRIVER
> +M:	Ricardo Ribalda <ricardo.ribalda@gmail.com>
> +L:	linux-media@vger.kernel.org
> +T:	git git://linuxtv.org/media_tree.git
> +S:	Maintained
> +F:	drivers/media/i2c/imx214.c
> +F:	Documentation/devicetree/bindings/media/i2c/imx214.txt
> +
>  SONY IMX258 SENSOR DRIVER
>  M:	Sakari Ailus <sakari.ailus@linux.intel.com>
>  L:	linux-media@vger.kernel.org
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index bfdb494686bf..d7e69ca0976c 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -595,6 +595,18 @@ config VIDEO_APTINA_PLL
>  config VIDEO_SMIAPP_PLL
>  	tristate
>  
> +config VIDEO_IMX214
> +	tristate "Sony IMX214 sensor support"
> +	depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +	depends on MEDIA_CAMERA_SUPPORT
> +	depends on V4L2_FWNODE
> +	help
> +	  This is a Video4Linux2 sensor driver for the Sony
> +	  IMX214 camera.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called imx214.
> +
>  config VIDEO_IMX258
>  	tristate "Sony IMX258 sensor support"
>  	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index a94eb03d10d4..61305edc6165 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C)		+= video-i2c.o
>  obj-$(CONFIG_VIDEO_ML86V7667)	+= ml86v7667.o
>  obj-$(CONFIG_VIDEO_OV2659)	+= ov2659.o
>  obj-$(CONFIG_VIDEO_TC358743)	+= tc358743.o
> +obj-$(CONFIG_VIDEO_IMX214)	+= imx214.o
>  obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
>  obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
>  
> diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
> new file mode 100644
> index 000000000000..33883c91d54d
> --- /dev/null
> +++ b/drivers/media/i2c/imx214.c
> @@ -0,0 +1,1126 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * imx214.c - imx214 sensor driver
> + *
> + * Copyright 2018 Qtechnology A/S
> + *
> + * Ricardo Ribalda <ricardo.ribalda@gmail.com>
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define IMX214_DEFAULT_CLK_FREQ	24000000
> +#define IMX214_DEFAULT_LINK_FREQ 480000000
> +#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
> +#define IMX214_WIDTH 4096
> +#define IMX214_HEIGHT 2304
> +#define IMX214_FPS 30
> +#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
> +
> +static const char * const imx214_supply_name[] = {
> +	"vdda",
> +	"vddd",
> +	"vdddo",
> +};
> +
> +#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
> +
> +struct imx214 {
> +	struct device *dev;
> +	struct clk *xclk;
> +	struct regmap *regmap;
> +
> +	struct v4l2_subdev sd;
> +	struct media_pad pad;
> +	struct v4l2_mbus_framefmt fmt;
> +	struct v4l2_rect crop;
> +
> +	struct v4l2_ctrl_handler ctrls;
> +	struct v4l2_ctrl *pixel_rate;
> +	struct v4l2_ctrl *link_freq;
> +	struct v4l2_ctrl *exposure;
> +
> +	struct regulator_bulk_data	supplies[IMX214_NUM_SUPPLIES];
> +
> +	struct gpio_desc *enable_gpio;
> +
> +	struct mutex mutex;
> +
> +	bool streaming;
> +	bool is_on;
> +};
> +
> +struct reg_8 {
> +	u16 addr;
> +	u8 val;
> +};
> +
> +enum {
> +	IMX214_TABLE_WAIT_MS = 0,
> +	IMX214_TABLE_END,
> +	IMX214_MAX_RETRIES,
> +	IMX214_WAIT_MS
> +};
> +
> +/*From imx214_mode_tbls.h*/
> +static const struct reg_8 mode_4096x2304[] = {
> +	{0x0114, 0x03},
> +	{0x0220, 0x00},
> +	{0x0221, 0x11},
> +	{0x0222, 0x01},
> +	{0x0340, 0x0C},
> +	{0x0341, 0x7A},
> +	{0x0342, 0x13},
> +	{0x0343, 0x90},
> +	{0x0344, 0x00},
> +	{0x0345, 0x38},
> +	{0x0346, 0x01},
> +	{0x0347, 0x98},
> +	{0x0348, 0x10},
> +	{0x0349, 0x37},
> +	{0x034A, 0x0A},
> +	{0x034B, 0x97},
> +	{0x0381, 0x01},
> +	{0x0383, 0x01},
> +	{0x0385, 0x01},
> +	{0x0387, 0x01},
> +	{0x0900, 0x00},
> +	{0x0901, 0x00},
> +	{0x0902, 0x00},
> +	{0x3000, 0x35},
> +	{0x3054, 0x01},
> +	{0x305C, 0x11},
> +
> +	{0x0112, 0x0A},
> +	{0x0113, 0x0A},
> +	{0x034C, 0x10},
> +	{0x034D, 0x00},
> +	{0x034E, 0x09},
> +	{0x034F, 0x00},
> +	{0x0401, 0x00},
> +	{0x0404, 0x00},
> +	{0x0405, 0x10},
> +	{0x0408, 0x00},
> +	{0x0409, 0x00},
> +	{0x040A, 0x00},
> +	{0x040B, 0x00},
> +	{0x040C, 0x10},
> +	{0x040D, 0x00},
> +	{0x040E, 0x09},
> +	{0x040F, 0x00},
> +
> +	{0x0301, 0x05},
> +	{0x0303, 0x02},
> +	{0x0305, 0x03},
> +	{0x0306, 0x00},
> +	{0x0307, 0x96},
> +	{0x0309, 0x0A},
> +	{0x030B, 0x01},
> +	{0x0310, 0x00},
> +
> +	{0x0820, 0x12},
> +	{0x0821, 0xC0},
> +	{0x0822, 0x00},
> +	{0x0823, 0x00},
> +
> +	{0x3A03, 0x09},
> +	{0x3A04, 0x50},
> +	{0x3A05, 0x01},
> +
> +	{0x0B06, 0x01},
> +	{0x30A2, 0x00},
> +
> +	{0x30B4, 0x00},
> +
> +	{0x3A02, 0xFF},
> +
> +	{0x3011, 0x00},
> +	{0x3013, 0x01},
> +
> +	{0x0202, 0x0C},
> +	{0x0203, 0x70},
> +	{0x0224, 0x01},
> +	{0x0225, 0xF4},
> +
> +	{0x0204, 0x00},
> +	{0x0205, 0x00},
> +	{0x020E, 0x01},
> +	{0x020F, 0x00},
> +	{0x0210, 0x01},
> +	{0x0211, 0x00},
> +	{0x0212, 0x01},
> +	{0x0213, 0x00},
> +	{0x0214, 0x01},
> +	{0x0215, 0x00},
> +	{0x0216, 0x00},
> +	{0x0217, 0x00},
> +
> +	{0x4170, 0x00},
> +	{0x4171, 0x10},
> +	{0x4176, 0x00},
> +	{0x4177, 0x3C},
> +	{0xAE20, 0x04},
> +	{0xAE21, 0x5C},
> +
> +	{IMX214_TABLE_WAIT_MS, 10},
> +	{0x0138, 0x01},
> +	{IMX214_TABLE_END, 0x00}
> +};
> +
> +static const struct reg_8 mode_1920x1080[] = {
> +	{0x0114, 0x03},
> +	{0x0220, 0x00},
> +	{0x0221, 0x11},
> +	{0x0222, 0x01},
> +	{0x0340, 0x0C},
> +	{0x0341, 0x7A},
> +	{0x0342, 0x13},
> +	{0x0343, 0x90},
> +	{0x0344, 0x04},
> +	{0x0345, 0x78},
> +	{0x0346, 0x03},
> +	{0x0347, 0xFC},
> +	{0x0348, 0x0B},
> +	{0x0349, 0xF7},
> +	{0x034A, 0x08},
> +	{0x034B, 0x33},
> +	{0x0381, 0x01},
> +	{0x0383, 0x01},
> +	{0x0385, 0x01},
> +	{0x0387, 0x01},
> +	{0x0900, 0x00},
> +	{0x0901, 0x00},
> +	{0x0902, 0x00},
> +	{0x3000, 0x35},
> +	{0x3054, 0x01},
> +	{0x305C, 0x11},
> +
> +	{0x0112, 0x0A},
> +	{0x0113, 0x0A},
> +	{0x034C, 0x07},
> +	{0x034D, 0x80},
> +	{0x034E, 0x04},
> +	{0x034F, 0x38},
> +	{0x0401, 0x00},
> +	{0x0404, 0x00},
> +	{0x0405, 0x10},
> +	{0x0408, 0x00},
> +	{0x0409, 0x00},
> +	{0x040A, 0x00},
> +	{0x040B, 0x00},
> +	{0x040C, 0x07},
> +	{0x040D, 0x80},
> +	{0x040E, 0x04},
> +	{0x040F, 0x38},
> +
> +	{0x0301, 0x05},
> +	{0x0303, 0x02},
> +	{0x0305, 0x03},
> +	{0x0306, 0x00},
> +	{0x0307, 0x96},
> +	{0x0309, 0x0A},
> +	{0x030B, 0x01},
> +	{0x0310, 0x00},
> +
> +	{0x0820, 0x12},
> +	{0x0821, 0xC0},
> +	{0x0822, 0x00},
> +	{0x0823, 0x00},
> +
> +	{0x3A03, 0x04},
> +	{0x3A04, 0xF8},
> +	{0x3A05, 0x02},
> +
> +	{0x0B06, 0x01},
> +	{0x30A2, 0x00},
> +
> +	{0x30B4, 0x00},
> +
> +	{0x3A02, 0xFF},
> +
> +	{0x3011, 0x00},
> +	{0x3013, 0x01},
> +
> +	{0x0202, 0x0C},
> +	{0x0203, 0x70},
> +	{0x0224, 0x01},
> +	{0x0225, 0xF4},
> +
> +	{0x0204, 0x00},
> +	{0x0205, 0x00},
> +	{0x020E, 0x01},
> +	{0x020F, 0x00},
> +	{0x0210, 0x01},
> +	{0x0211, 0x00},
> +	{0x0212, 0x01},
> +	{0x0213, 0x00},
> +	{0x0214, 0x01},
> +	{0x0215, 0x00},
> +	{0x0216, 0x00},
> +	{0x0217, 0x00},
> +
> +	{0x4170, 0x00},
> +	{0x4171, 0x10},
> +	{0x4176, 0x00},
> +	{0x4177, 0x3C},
> +	{0xAE20, 0x04},
> +	{0xAE21, 0x5C},
> +
> +	{IMX214_TABLE_WAIT_MS, 10},
> +	{0x0138, 0x01},
> +	{IMX214_TABLE_END, 0x00}
> +};
> +
> +static const struct reg_8 mode_table_common[] = {
> +	/* software reset */
> +
> +	/* software standby settings */
> +	{0x0100, 0x00},
> +
> +	/* ATR setting */
> +	{0x9300, 0x02},
> +
> +	/* external clock setting */
> +	{0x0136, 0x18},
> +	{0x0137, 0x00},
> +
> +	/* global setting */
> +	/* basic config */
> +	{0x0101, 0x00},
> +	{0x0105, 0x01},
> +	{0x0106, 0x01},
> +	{0x4550, 0x02},
> +	{0x4601, 0x00},
> +	{0x4642, 0x05},
> +	{0x6227, 0x11},
> +	{0x6276, 0x00},
> +	{0x900E, 0x06},
> +	{0xA802, 0x90},
> +	{0xA803, 0x11},
> +	{0xA804, 0x62},
> +	{0xA805, 0x77},
> +	{0xA806, 0xAE},
> +	{0xA807, 0x34},
> +	{0xA808, 0xAE},
> +	{0xA809, 0x35},
> +	{0xA80A, 0x62},
> +	{0xA80B, 0x83},
> +	{0xAE33, 0x00},
> +
> +	/* analog setting */
> +	{0x4174, 0x00},
> +	{0x4175, 0x11},
> +	{0x4612, 0x29},
> +	{0x461B, 0x12},
> +	{0x461F, 0x06},
> +	{0x4635, 0x07},
> +	{0x4637, 0x30},
> +	{0x463F, 0x18},
> +	{0x4641, 0x0D},
> +	{0x465B, 0x12},
> +	{0x465F, 0x11},
> +	{0x4663, 0x11},
> +	{0x4667, 0x0F},
> +	{0x466F, 0x0F},
> +	{0x470E, 0x09},
> +	{0x4909, 0xAB},
> +	{0x490B, 0x95},
> +	{0x4915, 0x5D},
> +	{0x4A5F, 0xFF},
> +	{0x4A61, 0xFF},
> +	{0x4A73, 0x62},
> +	{0x4A85, 0x00},
> +	{0x4A87, 0xFF},
> +
> +	/* embedded data */
> +	{0x5041, 0x04},
> +	{0x583C, 0x04},
> +	{0x620E, 0x04},
> +	{0x6EB2, 0x01},
> +	{0x6EB3, 0x00},
> +	{0x9300, 0x02},
> +
> +	/* imagequality */
> +	/* HDR setting */
> +	{0x3001, 0x07},
> +	{0x6D12, 0x3F},
> +	{0x6D13, 0xFF},
> +	{0x9344, 0x03},
> +	{0x9706, 0x10},
> +	{0x9707, 0x03},
> +	{0x9708, 0x03},
> +	{0x9E04, 0x01},
> +	{0x9E05, 0x00},
> +	{0x9E0C, 0x01},
> +	{0x9E0D, 0x02},
> +	{0x9E24, 0x00},
> +	{0x9E25, 0x8C},
> +	{0x9E26, 0x00},
> +	{0x9E27, 0x94},
> +	{0x9E28, 0x00},
> +	{0x9E29, 0x96},
> +
> +	/* CNR parameter setting */
> +	{0x69DB, 0x01},
> +
> +	/* Moire reduction */
> +	{0x6957, 0x01},
> +
> +	/* image enhancment */
> +	{0x6987, 0x17},
> +	{0x698A, 0x03},
> +	{0x698B, 0x03},
> +
> +	/* white balanace */
> +	{0x0B8E, 0x01},
> +	{0x0B8F, 0x00},
> +	{0x0B90, 0x01},
> +	{0x0B91, 0x00},
> +	{0x0B92, 0x01},
> +	{0x0B93, 0x00},
> +	{0x0B94, 0x01},
> +	{0x0B95, 0x00},
> +
> +	/* ATR setting */
> +	{0x6E50, 0x00},
> +	{0x6E51, 0x32},
> +	{0x9340, 0x00},
> +	{0x9341, 0x3C},
> +	{0x9342, 0x03},
> +	{0x9343, 0xFF},
> +	{IMX214_TABLE_END, 0x00}
> +};
> +
> +/*
> + * Declare modes in order, from biggest
> + * to smallest height.
> + */
> +static const struct imx214_mode {
> +	u32 width;
> +	u32 height;
> +	const struct reg_8 *reg_table;
> +} imx214_modes[] = {
> +	{
> +		.width = 4096,
> +		.height = 2304,
> +		.reg_table = mode_4096x2304,
> +	},
> +	{
> +		.width = 1920,
> +		.height = 1080,
> +		.reg_table = mode_1920x1080,
> +	},
> +};
> +
> +static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct imx214, sd);
> +}
> +
> +static int __maybe_unused imx214_power_on(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct imx214 *imx214 = to_imx214(sd);
> +	int ret;
> +
> +	if (imx214->is_on)
> +		return 0;
> +
> +	ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
> +	if (ret < 0) {
> +		dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
> +		return ret;
> +	}
> +
> +	usleep_range(2000, 3000);
> +
> +	ret = clk_prepare_enable(imx214->xclk);
> +	if (ret < 0) {
> +		regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> +		dev_err(imx214->dev, "clk prepare enable failed\n");
> +		return ret;
> +	}
> +
> +	gpiod_set_value_cansleep(imx214->enable_gpio, 1);
> +	usleep_range(12000, 15000);
> +
> +	imx214->is_on = true;
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused imx214_power_off(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct imx214 *imx214 = to_imx214(sd);
> +
> +	if (!imx214->is_on)
> +		return 0;

You can drop these checks as well as the is_on field.

> +
> +	gpiod_set_value_cansleep(imx214->enable_gpio, 0);
> +
> +	clk_disable_unprepare(imx214->xclk);
> +
> +	regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> +	usleep_range(10, 20);
> +
> +	imx214->is_on = false;
> +
> +	return 0;
> +}
> +
> +static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_pad_config *cfg,
> +				 struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	if (code->index > 0)
> +		return -EINVAL;
> +
> +	code->code = IMX214_MBUS_CODE;
> +
> +	return 0;
> +}
> +
> +static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
> +				  struct v4l2_subdev_pad_config *cfg,
> +				  struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	if (fse->code != IMX214_MBUS_CODE)
> +		return -EINVAL;
> +
> +	if (fse->index >= ARRAY_SIZE(imx214_modes))
> +		return -EINVAL;
> +
> +	fse->min_width = fse->max_width = imx214_modes[fse->index].width;
> +	fse->min_height = fse->max_height = imx214_modes[fse->index].height;
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +static int imx214_s_register(struct v4l2_subdev *subdev,
> +			      const struct v4l2_dbg_register *reg)
> +{
> +	struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> +
> +	return regmap_write(imx214->regmap, reg->reg, reg->val);
> +}
> +
> +static int imx214_g_register(struct v4l2_subdev *subdev,
> +			      struct v4l2_dbg_register *reg)
> +{
> +	struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> +	unsigned int aux;
> +	int ret;
> +
> +	reg->size = 1;
> +	ret = regmap_read(imx214->regmap, reg->reg, &aux);
> +	reg->val = aux;
> +
> +	return ret;
> +}
> +#endif
> +
> +static const struct v4l2_subdev_core_ops imx214_core_ops = {
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +	.g_register = imx214_g_register,
> +	.s_register = imx214_s_register,
> +#endif
> +};
> +
> +static struct v4l2_mbus_framefmt *
> +__imx214_get_pad_format(struct imx214 *imx214,
> +			struct v4l2_subdev_pad_config *cfg,
> +			unsigned int pad,
> +			enum v4l2_subdev_format_whence which)
> +{
> +	switch (which) {
> +	case V4L2_SUBDEV_FORMAT_TRY:
> +		return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
> +	case V4L2_SUBDEV_FORMAT_ACTIVE:
> +		return &imx214->fmt;
> +	default:
> +		return NULL;
> +	}
> +}
> +
> +static int imx214_get_format(struct v4l2_subdev *sd,
> +			     struct v4l2_subdev_pad_config *cfg,
> +			     struct v4l2_subdev_format *format)
> +{
> +	struct imx214 *imx214 = to_imx214(sd);
> +
> +	mutex_lock(&imx214->mutex);
> +	format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
> +						  format->which);
> +	mutex_unlock(&imx214->mutex);
> +
> +	return 0;
> +}
> +
> +static struct v4l2_rect *
> +__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
> +		      unsigned int pad, enum v4l2_subdev_format_whence which)
> +{
> +	switch (which) {
> +	case V4L2_SUBDEV_FORMAT_TRY:
> +		return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
> +	case V4L2_SUBDEV_FORMAT_ACTIVE:
> +		return &imx214->crop;
> +	default:
> +		return NULL;
> +	}
> +}
> +
> +static int imx214_set_format(struct v4l2_subdev *sd,
> +			     struct v4l2_subdev_pad_config *cfg,
> +			     struct v4l2_subdev_format *format)
> +{
> +	struct imx214 *imx214 = to_imx214(sd);
> +	struct v4l2_mbus_framefmt *__format;
> +	struct v4l2_rect *__crop;
> +	const struct imx214_mode *mode;
> +
> +	mutex_lock(&imx214->mutex);
> +
> +	__crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
> +
> +	if (format)
> +		mode = v4l2_find_nearest_size(imx214_modes,
> +				ARRAY_SIZE(imx214_modes), width, height,
> +				format->format.width, format->format.height);
> +	else
> +		mode = &imx214_modes[0];
> +
> +	__crop->width = mode->width;
> +	__crop->height = mode->height;
> +
> +	__format = __imx214_get_pad_format(imx214, cfg, format->pad,
> +					   format->which);
> +	__format->width = __crop->width;
> +	__format->height = __crop->height;
> +	__format->code = IMX214_MBUS_CODE;
> +	__format->field = V4L2_FIELD_NONE;
> +	__format->colorspace = V4L2_COLORSPACE_SRGB;
> +	__format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
> +	__format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> +				__format->colorspace, __format->ycbcr_enc);
> +	__format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
> +
> +	format->format = *__format;
> +
> +	mutex_unlock(&imx214->mutex);
> +
> +	return 0;
> +}
> +
> +static int imx214_get_selection(struct v4l2_subdev *sd,
> +				struct v4l2_subdev_pad_config *cfg,
> +				struct v4l2_subdev_selection *sel)
> +{
> +	struct imx214 *imx214 = to_imx214(sd);
> +
> +	if (sel->target != V4L2_SEL_TGT_CROP)
> +		return -EINVAL;
> +
> +	mutex_lock(&imx214->mutex);
> +	sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
> +					sel->which);
> +	mutex_unlock(&imx214->mutex);
> +	return 0;
> +}
> +
> +static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
> +				  struct v4l2_subdev_pad_config *cfg)
> +{
> +	struct v4l2_subdev_format fmt = { };
> +
> +	fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> +	fmt.format.width = imx214_modes[0].width;
> +	fmt.format.height = imx214_modes[0].height;
> +
> +	imx214_set_format(subdev, cfg, &fmt);
> +
> +	return 0;
> +}
> +
> +static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct imx214 *imx214 = container_of(ctrl->handler,
> +					     struct imx214, ctrls);
> +	u8 vals[2];
> +	int ret;
> +
> +	/*
> +	 * Applying V4L2 control value only happens
> +	 * when power is up for streaming
> +	 */
> +	if (!pm_runtime_get_if_in_use(imx214->dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_EXPOSURE:
> +		vals[1] = ctrl->val;
> +		vals[0] = ctrl->val >> 8;
> +		ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2);
> +		if (ret < 0)
> +			dev_err(imx214->dev, "Error %d\n", ret);
> +		ret = 0;
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +	}
> +
> +	pm_runtime_put(imx214->dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops imx214_ctrl_ops = {
> +	.s_ctrl = imx214_set_ctrl,
> +};
> +
> +#define MAX_CMD 4
> +static int imx214_write_table(struct imx214 *imx214,
> +				const struct reg_8 table[])
> +{
> +	u8 vals[MAX_CMD];
> +	int i;
> +	int ret;
> +
> +	for (table = table; table->addr != IMX214_TABLE_END ; table++) {
> +		if (table->addr == IMX214_TABLE_WAIT_MS) {
> +			usleep_range(table->val * 1000,
> +				     table->val * 1000 + 500);
> +			continue;
> +		}
> +
> +		for (i = 0; i < MAX_CMD; i++) {
> +			if (table[i].addr != (table[0].addr + i))
> +				break;
> +			vals[i] = table[i].val;
> +		}
> +
> +		ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
> +
> +		if (ret) {
> +			dev_err(imx214->dev, "write_table error: %d\n", ret);
> +			return ret;
> +		}
> +
> +		table += i - 1;
> +	}
> +
> +	return 0;
> +}
> +
> +static int imx214_start_streaming(struct imx214 *imx214)
> +{
> +	const struct imx214_mode *mode;
> +	int ret;
> +
> +	ret = imx214_write_table(imx214, mode_table_common);
> +	if (ret < 0) {
> +		dev_err(imx214->dev, "could not sent common table %d\n", ret);
> +		return ret;
> +	}
> +
> +	mode = v4l2_find_nearest_size(imx214_modes,
> +				ARRAY_SIZE(imx214_modes), width, height,
> +				imx214->fmt.width, imx214->fmt.height);
> +	ret = imx214_write_table(imx214, mode->reg_table);
> +	if (ret < 0) {
> +		dev_err(imx214->dev, "could not sent mode table %d\n", ret);
> +		return ret;
> +	}
> +	ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
> +	if (ret < 0) {
> +		dev_err(imx214->dev, "could not sync v4l2 controls\n");
> +		return ret;
> +	}
> +	ret = regmap_write(imx214->regmap, 0x100, 1);
> +	if (ret < 0) {
> +		dev_err(imx214->dev, "could not sent start table %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int imx214_stop_streaming(struct imx214 *imx214)
> +{
> +	int ret;
> +
> +	ret = regmap_write(imx214->regmap, 0x100, 0);
> +	if (ret < 0)
> +		dev_err(imx214->dev, "could not sent stop table %d\n",	ret);
> +
> +	return ret;
> +}
> +
> +static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
> +{
> +	struct imx214 *imx214 = to_imx214(subdev);
> +	int ret;
> +
> +	if (imx214->streaming == enable)
> +		return 0;
> +
> +	if (enable) {
> +		ret = pm_runtime_get_sync(imx214->dev);
> +		if (ret < 0) {
> +			pm_runtime_put_noidle(imx214->dev);
> +			return ret;
> +		}
> +
> +		ret = imx214_start_streaming(imx214);
> +		if (ret < 0)
> +			goto err_rpm_put;
> +	} else {
> +		ret = imx214_start_streaming(imx214);
> +		if (ret < 0)
> +			goto err_rpm_put;
> +		pm_runtime_put(imx214->dev);
> +	}
> +
> +	imx214->streaming = enable;
> +	return 0;
> +
> +err_rpm_put:
> +	pm_runtime_put(imx214->dev);
> +	return ret;
> +}
> +
> +static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
> +				      struct v4l2_subdev_frame_interval *fival)
> +{
> +	fival->pad = 0;
> +	fival->interval.numerator = 1;
> +	fival->interval.denominator = IMX214_FPS;
> +
> +	return 0;
> +}
> +
> +static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
> +				struct v4l2_subdev_pad_config *cfg,
> +				struct v4l2_subdev_frame_interval_enum *fie)
> +{
> +	const struct imx214_mode *mode;
> +
> +	if (fie->index != 0)
> +		return -EINVAL;
> +
> +	mode = v4l2_find_nearest_size(imx214_modes,
> +				ARRAY_SIZE(imx214_modes), width, height,
> +				fie->width, fie->height);
> +
> +	fie->code = IMX214_MBUS_CODE;
> +	fie->width = mode->width;
> +	fie->height = mode->height;
> +	fie->interval.numerator = 1;
> +	fie->interval.denominator = IMX214_FPS;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops imx214_video_ops = {
> +	.s_stream = imx214_s_stream,
> +	.g_frame_interval = imx214_g_frame_interval,
> +	.s_frame_interval = imx214_g_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
> +	.enum_mbus_code = imx214_enum_mbus_code,
> +	.enum_frame_size = imx214_enum_frame_size,
> +	.enum_frame_interval = imx214_enum_frame_interval,
> +	.get_fmt = imx214_get_format,
> +	.set_fmt = imx214_set_format,
> +	.get_selection = imx214_get_selection,
> +	.init_cfg = imx214_entity_init_cfg,
> +};
> +
> +static const struct v4l2_subdev_ops imx214_subdev_ops = {
> +	.core = &imx214_core_ops,
> +	.video = &imx214_video_ops,
> +	.pad = &imx214_subdev_pad_ops,
> +};
> +
> +static const struct regmap_config sensor_regmap_config = {
> +	.reg_bits = 16,
> +	.val_bits = 8,
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
> +		imx214->supplies[i].supply = imx214_supply_name[i];
> +
> +	return devm_regulator_bulk_get(dev,
> +				       IMX214_NUM_SUPPLIES,
> +				       imx214->supplies);

Fits on fewer lines.

> +}
> +
> +static int imx214_parse_fwnode(struct device *dev)
> +{
> +	struct fwnode_handle *endpoint;
> +	struct v4l2_fwnode_endpoint *bus_cfg;
> +	int i;

unsigned int

> +	int ret = 0;
> +
> +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> +	if (!endpoint) {
> +		dev_err(dev, "endpoint node not found\n");
> +		return -EINVAL;
> +	}
> +
> +	bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint);
> +	if (IS_ERR(bus_cfg)) {
> +		dev_err(dev, "parsing endpoint node failed\n");
> +		return PTR_ERR(bus_cfg);
> +	}
> +
> +	if (bus_cfg->bus_type != V4L2_MBUS_CSI2) {

Could you rebase this on the fwnode set, please?

<URL:https://git.linuxtv.org/sailus/media_tree.git/log/?h=v4l2-fwnode>

> +		dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
> +			bus_cfg->bus_type, V4L2_MBUS_CSI2);
> +		ret = -EINVAL;
> +		goto done;
> +	}
> +
> +	for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++)

		  ^
Extra space.

> +		if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
> +			break;
> +
> +	if (i == bus_cfg->nr_of_link_frequencies) {
> +		dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
> +			IMX214_DEFAULT_LINK_FREQ);
> +		ret = -EINVAL;
> +		goto done;
> +	}
> +
> +done:
> +	v4l2_fwnode_endpoint_free(bus_cfg);
> +	fwnode_handle_put(endpoint);
> +	return ret;
> +}
> +
> +
> +static int __maybe_unused imx214_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct imx214 *imx214 = to_imx214(sd);
> +
> +	if (imx214->streaming)
> +		imx214_stop_streaming(imx214);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused imx214_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct imx214 *imx214 = to_imx214(sd);
> +	int ret;
> +
> +	if (imx214->streaming) {
> +		ret = imx214_start_streaming(imx214);
> +		if (ret)
> +			goto error;
> +	}
> +
> +	return 0;
> +
> +error:
> +	imx214_stop_streaming(imx214);
> +	imx214->streaming = 0;
> +	return ret;
> +}
> +
> +static int imx214_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct imx214 *imx214;
> +	static const s64 link_freq[] = {
> +		IMX214_DEFAULT_LINK_FREQ,
> +	};
> +	int ret;
> +
> +	ret = imx214_parse_fwnode(dev);
> +	if (ret)
> +		return ret;
> +
> +	imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
> +	if (!imx214)
> +		return -ENOMEM;
> +
> +	imx214->dev = dev;
> +
> +	imx214->xclk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(imx214->xclk)) {
> +		dev_err(dev, "could not get xclk");
> +		return PTR_ERR(imx214->xclk);
> +	}
> +
> +	ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
> +	if (ret) {
> +		dev_err(dev, "could not set xclk frequency\n");
> +		return ret;
> +	}
> +
> +	ret = imx214_get_regulators(dev, imx214);
> +	if (ret < 0) {
> +		dev_err(dev, "cannot get regulators\n");
> +		return ret;
> +	}
> +
> +	imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> +	if (IS_ERR(imx214->enable_gpio)) {
> +		dev_err(dev, "cannot get enable gpio\n");
> +		return PTR_ERR(imx214->enable_gpio);
> +	}
> +
> +	imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
> +	if (IS_ERR(imx214->regmap)) {
> +		dev_err(dev, "regmap init failed\n");
> +		return PTR_ERR(imx214->regmap);
> +	}
> +
> +	v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
> +	pm_runtime_set_active(imx214->dev);
> +	pm_runtime_enable(imx214->dev);
> +	pm_runtime_idle(imx214->dev);
> +
> +	v4l2_ctrl_handler_init(&imx214->ctrls, 3);
> +
> +	imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
> +					       V4L2_CID_PIXEL_RATE, 0,
> +					       IMX214_DEFAULT_PIXEL_RATE, 1,
> +					       IMX214_DEFAULT_PIXEL_RATE);
> +	imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
> +						   V4L2_CID_LINK_FREQ,
> +						   ARRAY_SIZE(link_freq) - 1,
> +						   0, link_freq);
> +	if (imx214->link_freq)
> +		imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	/*
> +	 * WARNING!
> +	 * Values obtained reverse engineering blobs and/or devices.
> +	 * Ranges and functionality might be wrong.
> +	 *
> +	 * Sony, please release some register set documentation for the
> +	 * device.
> +	 *
> +	 * Yours sincerely, Ricardo.
> +	 */
> +	imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
> +					     V4L2_CID_EXPOSURE,
> +					     0, 0xffff, 1, 0x0c70);
> +
> +	ret = imx214->ctrls.error;
> +	if (ret) {
> +		dev_err(&client->dev, "%s control init failed (%d)\n",
> +				__func__, ret);
> +		goto free_ctrl;
> +	}
> +
> +	imx214->sd.ctrl_handler = &imx214->ctrls;
> +	ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
> +	if (ret) {
> +		dev_err(&client->dev,
> +			"Error %d setting default controls\n", ret);
> +		goto free_ctrl;
> +	}
> +
> +	imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	imx214->sd.dev = &client->dev;
> +	imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> +	ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
> +	if (ret < 0) {
> +		dev_err(dev, "could not register media entity\n");
> +		goto free_ctrl;
> +	}
> +
> +	mutex_init(&imx214->mutex);

How about using the same mutex for the control handler? See e.g. the smiapp
driver for an example. Perhaps serialise the streamon bits as well as
they're a part of the driver interface?

That way you wouldn't need to care about things happening in parallel. I'm
not fully certain that would be harmful but there is no benefit from that
either.

> +	imx214_entity_init_cfg(&imx214->sd, NULL);
> +
> +	ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
> +	if (ret < 0) {
> +		dev_err(dev, "could not register v4l2 device\n");
> +		goto free_entity;
> +	}
> +
> +	return 0;
> +
> +free_entity:
> +	mutex_destroy(&imx214->mutex);
> +	media_entity_cleanup(&imx214->sd.entity);
> +free_ctrl:
> +	v4l2_ctrl_handler_free(&imx214->ctrls);
> +	pm_runtime_disable(imx214->dev);
> +
> +	return ret;
> +}
> +
> +static int imx214_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct imx214 *imx214 = to_imx214(sd);
> +
> +	v4l2_async_unregister_subdev(&imx214->sd);
> +	media_entity_cleanup(&imx214->sd.entity);
> +	v4l2_ctrl_handler_free(&imx214->ctrls);
> +
> +	pm_runtime_disable(&client->dev);
> +	pm_runtime_set_suspended(&client->dev);
> +
> +	mutex_destroy(&imx214->mutex);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id imx214_of_match[] = {
> +	{ .compatible = "sony,imx214" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, imx214_of_match);
> +
> +static const struct dev_pm_ops imx214_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(imx214_suspend, imx214_resume)
> +	SET_RUNTIME_PM_OPS(imx214_power_off, imx214_power_on, NULL)
> +};
> +
> +static struct i2c_driver imx214_i2c_driver = {
> +	.driver = {
> +		.of_match_table = imx214_of_match,
> +		.pm = &imx214_pm_ops,
> +		.name  = "imx214",
> +	},
> +	.probe_new  = imx214_probe,
> +	.remove = imx214_remove,
> +};
> +
> +module_i2c_driver(imx214_i2c_driver);
> +
> +MODULE_DESCRIPTION("Sony IMX214 Camera drier");
> +MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
> +MODULE_LICENSE("GPL v2");

-- 
Sakari Ailus
sakari.ailus@linux.intel.com

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2018-10-04 10:57 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-04 10:11 [PATCH v6 2/2] [media] imx214: Add imx214 camera sensor driver Ricardo Ribalda Delgado
2018-10-04 10:57 ` Sakari Ailus

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).