linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Vabhav Sharma <vabhav.sharma@nxp.com>
Cc: sudeep.holla@arm.com, oss@buserror.net,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
	sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
	linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
	will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
	kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
	leoyang.li@nxp.com, linux@armlinux.org.uk, V.Sethi@nxp.com,
	udit.kumar@nxp.com, pankaj.bansal@nxp.com,
	Priyanka Jain <priyanka.jain@nxp.com>,
	Sriram Dash <sriram.dash@nxp.com>
Subject: Re: [PATCH v4 6/6] arm64: dts: add LX2160ARDB board support
Date: Mon, 8 Oct 2018 13:52:01 +0800	[thread overview]
Message-ID: <20181008055159.GH3587@dragon> (raw)
In-Reply-To: <1538615031-7507-7-git-send-email-vabhav.sharma@nxp.com>

On Thu, Oct 04, 2018 at 06:33:51AM +0530, Vabhav Sharma wrote:
> LX2160A reference design board (RDB) is a high-performance
> computing, evaluation, and development platform with LX2160A
> SoC.
> 
> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile            |   1 +
>  arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 100 ++++++++++++++++++++++
>  2 files changed, 101 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 86e18ad..445b72b 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> new file mode 100644
> index 0000000..1483071
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Device Tree file for LX2160ARDB
> +//
> +// Copyright 2018 NXP
> +
> +/dts-v1/;
> +
> +#include "fsl-lx2160a.dtsi"
> +
> +/ {
> +	model = "NXP Layerscape LX2160ARDB";
> +	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	sb_3v3: regulator-fixed {

The node name should probably be named like regulator-sb3v3 or
something, so that the pattern can be followed when we have another
fixed regulator to be added.

> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.3V";

The name should be something we can find on board schematics.

> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&i2c0 {

Please keep these labeled nodes sorted alphabetically.

> +	status = "okay";

Have a newline between properties and child node.

> +	i2c-mux@77 {
> +		compatible = "nxp,pca9547";
> +		reg = <0x77>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		i2c@2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x2>;
> +
> +			power-monitor@40 {
> +				compatible = "ti,ina220";
> +				reg = <0x40>;
> +				shunt-resistor = <1000>;
> +			};
> +		};
> +
> +		i2c@3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x3>;
> +
> +			temperature-sensor@4c {
> +				compatible = "nxp,sa56004";
> +				reg = <0x4c>;
> +				vcc-supply = <&sb_3v3>;
> +			};
> +
> +			temperature-sensor@4d {
> +				compatible = "nxp,sa56004";
> +				reg = <0x4d>;
> +				vcc-supply = <&sb_3v3>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c4 {
> +	status = "okay";
> +
> +	rtc@51 {
> +		compatible = "nxp,pcf2129";
> +		reg = <0x51>;
> +		// IRQ10_B
> +		interrupts = <0 150 0x4>;
> +		};

Bad indentation.

Shawn

> +
> +};
> +
> +&usb0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +};
> +
> +&crypto {
> +	status = "okay";
> +};
> -- 
> 2.7.4
> 

  reply	other threads:[~2018-10-08  5:52 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-04  1:03 [PATCH v4 0/6] arm64: dts: NXP: add basic dts file for LX2160A SoC Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 1/6] dt-bindings: arm64: add compatible for LX2160A Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 2/6] soc/fsl/guts: Add compatible string " Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 3/6] clk: qoriq: increase array size of cmux_to_group Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 4/6] clk: qoriq: Add clockgen support for lx2160a Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 5/6] arm64: dts: add QorIQ LX2160A SoC support Vabhav Sharma
2018-10-08  5:45   ` Shawn Guo
2018-10-15  2:58     ` Vabhav Sharma
2018-10-15 16:48       ` Stephen Boyd
2018-10-25  4:19         ` Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 6/6] arm64: dts: add LX2160ARDB board support Vabhav Sharma
2018-10-08  5:52   ` Shawn Guo [this message]
2018-10-15  2:44     ` Vabhav Sharma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181008055159.GH3587@dragon \
    --to=shawnguo@kernel.org \
    --cc=V.Sethi@nxp.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kstewart@linuxfoundation.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=oss@buserror.net \
    --cc=pankaj.bansal@nxp.com \
    --cc=priyanka.jain@nxp.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sriram.dash@nxp.com \
    --cc=sudeep.holla@arm.com \
    --cc=udit.kumar@nxp.com \
    --cc=vabhav.sharma@nxp.com \
    --cc=viresh.kumar@linaro.org \
    --cc=will.deacon@arm.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).