linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Matias Bjørling" <mb@lightnvm.io>
To: axboe@fb.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Javier González" <javier@javigon.com>,
	"Javier González" <javier@cnexlabs.com>,
	"Matias Bjørling" <mb@lightnvm.io>
Subject: [GIT PULL 45/45] lightnvm: pblk: guarantee that backpointer is respected on writer stall
Date: Tue,  9 Oct 2018 13:12:15 +0200	[thread overview]
Message-ID: <20181009111215.7653-46-mb@lightnvm.io> (raw)
In-Reply-To: <20181009111215.7653-1-mb@lightnvm.io>

From: Javier González <javier@javigon.com>

pblk's write buffer must guarantee that it respects the device's
constrains for reads (i.e., mw_cunits). This is done by maintaining a
backpointer that updates the L2P table as entries wrap up, making them
point to the media instead of pointing to the write buffer.

This mechanism can race in case that the write thread stalls, as the
write pointer will protect the last written entry, thus disregarding the
read constrains.

This patch adds an extra check on wrap up, making sure that the
threshold is respected at all times, preventing new entries to overwrite
committed data, also in case of write thread stall.

Reported-by: Heiner Litz <hlitz@ucsc.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Heiner Litz <hlitz@ucsc.edu>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
---
 drivers/lightnvm/pblk-init.c | 5 +++--
 drivers/lightnvm/pblk-rb.c   | 9 +++++++--
 drivers/lightnvm/pblk.h      | 8 +++++++-
 3 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/lightnvm/pblk-init.c b/drivers/lightnvm/pblk-init.c
index e5239aba806b..13822594647c 100644
--- a/drivers/lightnvm/pblk-init.c
+++ b/drivers/lightnvm/pblk-init.c
@@ -193,8 +193,9 @@ static int pblk_rwb_init(struct pblk *pblk)
 	struct nvm_tgt_dev *dev = pblk->dev;
 	struct nvm_geo *geo = &dev->geo;
 	unsigned long buffer_size;
-	int pgs_in_buffer;
+	int pgs_in_buffer, threshold;
 
+	threshold = geo->mw_cunits * geo->all_luns;
 	pgs_in_buffer = (max(geo->mw_cunits, geo->ws_opt) + geo->ws_opt)
 								* geo->all_luns;
 
@@ -203,7 +204,7 @@ static int pblk_rwb_init(struct pblk *pblk)
 	else
 		buffer_size = pgs_in_buffer;
 
-	return pblk_rb_init(&pblk->rwb, buffer_size, geo->csecs);
+	return pblk_rb_init(&pblk->rwb, buffer_size, threshold, geo->csecs);
 }
 
 /* Minimum pages needed within a lun */
diff --git a/drivers/lightnvm/pblk-rb.c b/drivers/lightnvm/pblk-rb.c
index f653faa6a9ed..b1f4b51783f4 100644
--- a/drivers/lightnvm/pblk-rb.c
+++ b/drivers/lightnvm/pblk-rb.c
@@ -56,7 +56,8 @@ static unsigned int pblk_rb_calculate_size(unsigned int nr_entries)
  * allocated and their size must be a power of two
  * (Documentation/core-api/circular-buffers.rst)
  */
-int pblk_rb_init(struct pblk_rb *rb, unsigned int size, unsigned int seg_size)
+int pblk_rb_init(struct pblk_rb *rb, unsigned int size, unsigned int threshold,
+		 unsigned int seg_size)
 {
 	struct pblk *pblk = container_of(rb, struct pblk, rwb);
 	struct pblk_rb_entry *entries;
@@ -79,6 +80,7 @@ int pblk_rb_init(struct pblk_rb *rb, unsigned int size, unsigned int seg_size)
 	rb->seg_size = (1 << power_seg_sz);
 	rb->nr_entries = (1 << power_size);
 	rb->mem = rb->subm = rb->sync = rb->l2p_update = 0;
+	rb->back_thres = threshold;
 	rb->flush_point = EMPTY_ENTRY;
 
 	spin_lock_init(&rb->w_lock);
@@ -404,11 +406,14 @@ static int __pblk_rb_may_write(struct pblk_rb *rb, unsigned int nr_entries,
 {
 	unsigned int mem;
 	unsigned int sync;
+	unsigned int threshold;
 
 	sync = READ_ONCE(rb->sync);
 	mem = READ_ONCE(rb->mem);
 
-	if (pblk_rb_ring_space(rb, mem, sync, rb->nr_entries) < nr_entries)
+	threshold = nr_entries + rb->back_thres;
+
+	if (pblk_rb_ring_space(rb, mem, sync, rb->nr_entries) < threshold)
 		return 0;
 
 	if (pblk_rb_update_l2p(rb, nr_entries, mem, sync))
diff --git a/drivers/lightnvm/pblk.h b/drivers/lightnvm/pblk.h
index 0f98ea24ee59..02bb2e98f8a9 100644
--- a/drivers/lightnvm/pblk.h
+++ b/drivers/lightnvm/pblk.h
@@ -203,6 +203,11 @@ struct pblk_rb {
 					 * will be 4KB
 					 */
 
+	unsigned int back_thres;	/* Threshold that shall be maintained by
+					 * the backpointer in order to respect
+					 * geo->mw_cunits on a per chunk basis
+					 */
+
 	struct list_head pages;		/* List of data pages */
 
 	spinlock_t w_lock;		/* Write lock */
@@ -734,7 +739,8 @@ struct pblk_line_ws {
 /*
  * pblk ring buffer operations
  */
-int pblk_rb_init(struct pblk_rb *rb, unsigned int size, unsigned int seg_sz);
+int pblk_rb_init(struct pblk_rb *rb, unsigned int size, unsigned int threshold,
+		 unsigned int seg_sz);
 int pblk_rb_may_write_user(struct pblk_rb *rb, struct bio *bio,
 			   unsigned int nr_entries, unsigned int *pos);
 int pblk_rb_may_write_gc(struct pblk_rb *rb, unsigned int nr_entries,
-- 
2.17.1


  parent reply	other threads:[~2018-10-09 11:15 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 11:11 [GIT PULL 00/45] lightnvm updates for 4.20 Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 01/45] lightnvm: remove dependencies on BLK_DEV_NVME and PCI Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 02/45] lightnvm: combine 1.2 and 2.0 command flags Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 03/45] lightnvm: pblk: fix rqd.error return value in pblk_blk_erase_sync Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 04/45] lightnvm: move device L2P detection to core Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 05/45] lightnvm: pblk: fix race condition on metadata I/O Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 06/45] lightnvm: move bad block and chunk state logic to core Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 07/45] lightnvm: pblk: unify vector max req constants Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 08/45] lightnvm: pblk: fix incorrect min_write_pgs Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 09/45] lightnvm: pblk: remove size and out of bounds read check Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 10/45] lightnvm: pblk: refactor put line fn on read completion Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 11/45] lightnvm: pblk: add helpers for chunk addresses Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 12/45] lightnvm: pblk: improve line helpers Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 13/45] lightnvm: pblk: fix comment typo Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 14/45] lightnvm: pblk: remove unused variable Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 15/45] lightnvm: pblk: guarantee emeta on line close Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 16/45] lightnvm: introduce nvm_rq_to_ppa_list Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 17/45] lightnvm: pblk: allocate line map bitmaps using a mempool Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 18/45] lightnvm: pblk: remove unused parameters in pblk_up_rq Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 19/45] lightnvm: pblk: fix up prints in pblk_read_check_rand Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 20/45] lightnvm: pblk: fix write amplificiation calculation Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 21/45] lightnvm: pblk: remove debug from pblk_[down/up]_page Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 22/45] lightnvm: pblk: add trace events for chunk states Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 23/45] lightnvm: pblk: add trace events for line state changes Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 24/45] lightnvm: pblk: add trace events for pblk " Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 25/45] lightnvm: pblk: add tracing for chunk resets Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 26/45] lightnvm: move ppa transformations to core Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 27/45] lightnvm: pblk: calculate line pad distance in helper Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 28/45] lightnvm: pblk: stop recreating global caches Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 29/45] lightnvm: pblk: fix mapping issue on failed writes Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 30/45] lightnvm: pblk: fix two sleep-in-atomic-context bugs Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 31/45] lightnvm: use internal allocation for chunk log page Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 32/45] lightnvm: pblk: encapsulate rqd dma allocations Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 33/45] lightnvm: pblk: refactor metadata paths Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 34/45] lightnvm: pblk: take write semaphore on metadata Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 35/45] lightnvm: pblk: recover open lines on 2.0 devices Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 36/45] lightnvm: pblk: add SPDX license tag Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 37/45] lightnvm: pblk: fix race on sysfs line state Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 38/45] lightnvm: pblk: remove unused function Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 39/45] lightnvm: pblk: encapsulate rb pointer operations Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 40/45] lightnvm: pblk: move ring buffer alloc/free rb init Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 41/45] lightnvm: pblk: guarantee mw_cunits on read buffer Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 42/45] lightnvm: do no update csecs and sos on 1.2 Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 43/45] lightnvm: pblk: fix error handling of pblk_lines_init() Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 44/45] lightnvm: pblk: consider max hw sectors supported for max_write_pgs Matias Bjørling
2018-10-09 11:12 ` Matias Bjørling [this message]
2018-10-09 14:25 ` [GIT PULL 00/45] lightnvm updates for 4.20 Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181009111215.7653-46-mb@lightnvm.io \
    --to=mb@lightnvm.io \
    --cc=axboe@fb.com \
    --cc=javier@cnexlabs.com \
    --cc=javier@javigon.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).