On 2018-10-09, 'Jann Horn' via dev wrote: > On Tue, Oct 9, 2018 at 9:03 AM Aleksa Sarai wrote: > > This patch allows for AT_BENEATH and AT_THIS_ROOT to safely permit ".." > > resolution (in the case of AT_BENEATH the resolution will still fail if > > ".." resolution would resolve a path outside of the root -- while > > AT_THIS_ROOT will chroot(2)-style scope it). "proclink" jumps are still > > disallowed entirely because now they could result in inconsistent > > behaviour if resolution encounters a subsequent "..". > > > > The need for this patch is explained by observing there is a fairly > > easy-to-exploit race condition with chroot(2) (and thus by extension > > AT_THIS_ROOT and AT_BENEATH) where a rename(2) of a path can be used to > > "skip over" nd->root and thus escape to the filesystem above nd->root. > > > > thread1 [attacker]: > > for (;;) > > renameat2(AT_FDCWD, "/a/b/c", AT_FDCWD, "/a/d", RENAME_EXCHANGE); > > thread2 [victim]: > > for (;;) > > openat(dirb, "b/c/../../etc/shadow", O_THISROOT); > > > > With fairly significant regularity, thread2 will resolve to > > "/etc/shadow" rather than "/a/b/etc/shadow". There is also a similar > > (though somewhat more privileged) attack using MS_MOVE. > > > > With this patch, such cases will be detected *during* ".." resolution > > (which is the weak point of chroot(2) -- since walking *into* a > > subdirectory tautologically cannot result in you walking *outside* > > nd->root -- except through a bind-mount or "proclink"). By detecting > > this at ".." resolution (rather than checking only at the end of the > > entire resolution) we can both correct escapes by jumping back to the > > root (in the case of AT_THIS_ROOT), as well as avoid revealing to > > attackers the structure of the filesystem outside of the root (through > > timing attacks for instance). > > > > In order to avoid a quadratic lookup with each ".." entry, we only > > activate the slow path if a write through &rename_lock or &mount_lock > > have occurred during path resolution (&rename_lock and &mount_lock are > > re-taken to further optimise the lookup). Since the primary attack being > > protected against is MS_MOVE or rename(2), not doing additional checks > > unless a mount or rename have occurred avoids making the common case > > slow. > > > > The use of __d_path here might seem suspect, but on further inspection > > of the most important race (a path was *inside* the root but is now > > *outside*), there appears to be no attack potential. If __d_path occurs > > before the rename, then the path will be resolved but since the path was > > originally inside the root there is no escape. Subsequent ".." jumps are > > guaranteed to check __d_path reachable (by construction, &rename_lock or > > &mount_lock must have been taken after __d_path returned), > > "after"? Don't you mean "before"? Otherwise I don't understand what > you're saying here. I meant that the attacker doing the rename must've taken &rename_lock or &mount_lock after __d_path returns in the target process (because the race being examined is that the rename occurs *after* __d_path) and thus are guaranteed to be detected). Maybe there's a better way to phrase what I mean... > > +static inline int nd_alloc_dpathbuf(struct nameidata *nd) > > +{ > > + if (unlikely(!nd->dpathbuf)) { > > + if (nd->flags & LOOKUP_RCU) { > > + nd->dpathbuf = kmalloc(PATH_MAX, GFP_ATOMIC); > > + if (unlikely(!nd->dpathbuf)) > > + return -ECHILD; > > + } else { > > + nd->dpathbuf = kmalloc(PATH_MAX, GFP_KERNEL); > > + if (unlikely(!nd->dpathbuf)) > > + return -ENOMEM; > > + } > > + } > > + return 0; > > +} > > Note that a fixed-size path buffer means that if the path is very > long, e.g. because you followed long symlinks on the way down, this > can cause lookup failures. This is already an issue with __d_path (even if the buffer was larger) because it will not output a path longer than PATH_MAX. I imagine this is a pretty strong argument for why we should refactor __d_path so that we can *just* use the escape checking to avoid -ENAMETOOLONG. I can work on this, but I'll wait until after LPC to see what the discussion there brings up. > > + error = nd_alloc_dpathbuf(nd); > > + if (error) > > + return error; > > + pathptr = __d_path(&nd->path, &nd->root, nd->dpathbuf, PATH_MAX); > > + if (unlikely(!pathptr)) > > + /* Breakout -- go back to root! */ > > + return nd_jump_root(nd); > > I find the semantics of this check odd - especially in the > LOOKUP_BENEATH case, but also in the LOOKUP_CHROOT case. Wouldn't it > make more sense to just throw an error here? Making /.. go back to the > root is one thing, but making ".." from anything that has escaped from > the root go back to the root seems less logical to me. For AT_BENEATH, nd_jump_root() will always return -EXDEV -- but I'll take your point for AT_THIS_ROOT below. > Thread A (a webserver or whatever) looks up > "example.org/images/foo/../bar.png" under "/var/www" with > LOOKUP_BENEATH. > Thread B concurrently moves "/var/www/example.org/images" to > "/var/backup/example.org/images". > Now thread A can accidentally resolve its path to "/var/www/bar.png" > if the race happens the wrong way? This is a good point. When I changed this from always being -EXDEV in my other postings, I was thinking about "/.." rather than the case you've outlined where ".." is in the path but it's not actually meant to go to the root. I agree -EXDEV makes much more sense here. I will add this to my tree (but I'll wait until after LPC before I send out a new series). -- Aleksa Sarai Senior Software Engineer (Containers) SUSE Linux GmbH