LKML Archive on lore.kernel.org
 help / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, ohad@wizery.com
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, tsoni@codeaurora.org,
	sricharan@codeaurora.org, akdwived@codeaurora.org,
	kyan@codeaurora.org, Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH v4 3/5] remoteproc: qcom: q6v5-mss: Refactor mba load/unload sequence
Date: Tue,  9 Oct 2018 21:53:37 +0530
Message-ID: <20181009162339.30522-4-sibis@codeaurora.org> (raw)
In-Reply-To: <20181009162339.30522-1-sibis@codeaurora.org>

Refactor re-useable parts of mba load/unload sequence into mba_load and
mba_reclaim respectively. This is done in order to prevent code duplication
for modem coredump, which requires the mba to be loaded before dumping
the segments. No change in functionality is intended.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 239 +++++++++++++++++------------
 1 file changed, 140 insertions(+), 99 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index f52b64120877..c475af65ba1d 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -679,6 +679,143 @@ static bool q6v5_phdr_valid(const struct elf32_phdr *phdr)
 	return true;
 }
 
+static int q6v5_mba_load(struct q6v5 *qproc)
+{
+	int ret;
+	int xfermemop_ret;
+
+	ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
+				    qproc->proxy_reg_count);
+	if (ret) {
+		dev_err(qproc->dev, "failed to enable proxy supplies\n");
+		return ret;
+	}
+
+	ret = q6v5_clk_enable(qproc->dev, qproc->proxy_clks,
+			      qproc->proxy_clk_count);
+	if (ret) {
+		dev_err(qproc->dev, "failed to enable proxy clocks\n");
+		goto disable_proxy_reg;
+	}
+
+	ret = q6v5_regulator_enable(qproc, qproc->active_regs,
+				    qproc->active_reg_count);
+	if (ret) {
+		dev_err(qproc->dev, "failed to enable supplies\n");
+		goto disable_proxy_clk;
+	}
+
+	ret = q6v5_clk_enable(qproc->dev, qproc->reset_clks,
+			      qproc->reset_clk_count);
+	if (ret) {
+		dev_err(qproc->dev, "failed to enable reset clocks\n");
+		goto disable_vdd;
+	}
+
+	ret = q6v5_reset_deassert(qproc);
+	if (ret) {
+		dev_err(qproc->dev, "failed to deassert mss restart\n");
+		goto disable_reset_clks;
+	}
+
+	ret = q6v5_clk_enable(qproc->dev, qproc->active_clks,
+			      qproc->active_clk_count);
+	if (ret) {
+		dev_err(qproc->dev, "failed to enable clocks\n");
+		goto assert_reset;
+	}
+
+	/* Assign MBA image access in DDR to q6 */
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+				      qproc->mba_phys, qproc->mba_size);
+	if (ret) {
+		dev_err(qproc->dev,
+			"assigning Q6 access to mba memory failed: %d\n", ret);
+		goto disable_active_clks;
+	}
+
+	writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
+
+	ret = q6v5proc_reset(qproc);
+	if (ret)
+		goto reclaim_mba;
+
+	ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
+	if (ret == -ETIMEDOUT) {
+		dev_err(qproc->dev, "MBA boot timed out\n");
+		goto halt_axi_ports;
+	} else if (ret != RMB_MBA_XPU_UNLOCKED &&
+		   ret != RMB_MBA_XPU_UNLOCKED_SCRIBBLED) {
+		dev_err(qproc->dev, "MBA returned unexpected status %d\n", ret);
+		ret = -EINVAL;
+		goto halt_axi_ports;
+	}
+
+	return 0;
+
+halt_axi_ports:
+	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
+	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
+	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
+
+reclaim_mba:
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
+						qproc->mba_phys,
+						qproc->mba_size);
+	if (xfermemop_ret) {
+		dev_err(qproc->dev,
+			"Failed to reclaim mba buffer, system may become unstable\n");
+	}
+
+disable_active_clks:
+	q6v5_clk_disable(qproc->dev, qproc->active_clks,
+			 qproc->active_clk_count);
+assert_reset:
+	q6v5_reset_assert(qproc);
+disable_reset_clks:
+	q6v5_clk_disable(qproc->dev, qproc->reset_clks,
+			 qproc->reset_clk_count);
+disable_vdd:
+	q6v5_regulator_disable(qproc, qproc->active_regs,
+			       qproc->active_reg_count);
+disable_proxy_clk:
+	q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
+			 qproc->proxy_clk_count);
+disable_proxy_reg:
+	q6v5_regulator_disable(qproc, qproc->proxy_regs,
+			       qproc->proxy_reg_count);
+
+	return ret;
+}
+
+static void q6v5_mba_reclaim(struct q6v5 *qproc)
+{
+	int xfermemop_ret;
+
+	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
+	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
+	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
+						qproc->mba_phys,
+						qproc->mba_size);
+	if (xfermemop_ret) {
+		dev_err(qproc->dev,
+			"Failed to reclaim mba buffer, system may become unstable\n");
+	}
+
+	q6v5_clk_disable(qproc->dev, qproc->active_clks,
+			 qproc->active_clk_count);
+	q6v5_reset_assert(qproc);
+	q6v5_clk_disable(qproc->dev, qproc->reset_clks,
+			 qproc->reset_clk_count);
+	q6v5_regulator_disable(qproc, qproc->active_regs,
+			       qproc->active_reg_count);
+	q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
+			 qproc->proxy_clk_count);
+	q6v5_regulator_disable(qproc, qproc->proxy_regs,
+			       qproc->proxy_reg_count);
+}
+
 static int q6v5_mpss_load(struct q6v5 *qproc)
 {
 	const struct elf32_phdr *phdrs;
@@ -803,72 +940,9 @@ static int q6v5_start(struct rproc *rproc)
 
 	qcom_q6v5_prepare(&qproc->q6v5);
 
-	ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
-				    qproc->proxy_reg_count);
-	if (ret) {
-		dev_err(qproc->dev, "failed to enable proxy supplies\n");
-		goto disable_irqs;
-	}
-
-	ret = q6v5_clk_enable(qproc->dev, qproc->proxy_clks,
-			      qproc->proxy_clk_count);
-	if (ret) {
-		dev_err(qproc->dev, "failed to enable proxy clocks\n");
-		goto disable_proxy_reg;
-	}
-
-	ret = q6v5_regulator_enable(qproc, qproc->active_regs,
-				    qproc->active_reg_count);
-	if (ret) {
-		dev_err(qproc->dev, "failed to enable supplies\n");
-		goto disable_proxy_clk;
-	}
-
-	ret = q6v5_clk_enable(qproc->dev, qproc->reset_clks,
-			      qproc->reset_clk_count);
-	if (ret) {
-		dev_err(qproc->dev, "failed to enable reset clocks\n");
-		goto disable_vdd;
-	}
-
-	ret = q6v5_reset_deassert(qproc);
-	if (ret) {
-		dev_err(qproc->dev, "failed to deassert mss restart\n");
-		goto disable_reset_clks;
-	}
-
-	ret = q6v5_clk_enable(qproc->dev, qproc->active_clks,
-			      qproc->active_clk_count);
-	if (ret) {
-		dev_err(qproc->dev, "failed to enable clocks\n");
-		goto assert_reset;
-	}
-
-	/* Assign MBA image access in DDR to q6 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
-				      qproc->mba_phys, qproc->mba_size);
-	if (ret) {
-		dev_err(qproc->dev,
-			"assigning Q6 access to mba memory failed: %d\n", ret);
-		goto disable_active_clks;
-	}
-
-	writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
-
-	ret = q6v5proc_reset(qproc);
+	ret = q6v5_mba_load(qproc);
 	if (ret)
-		goto reclaim_mba;
-
-	ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
-	if (ret == -ETIMEDOUT) {
-		dev_err(qproc->dev, "MBA boot timed out\n");
-		goto halt_axi_ports;
-	} else if (ret != RMB_MBA_XPU_UNLOCKED &&
-		   ret != RMB_MBA_XPU_UNLOCKED_SCRIBBLED) {
-		dev_err(qproc->dev, "MBA returned unexpected status %d\n", ret);
-		ret = -EINVAL;
-		goto halt_axi_ports;
-	}
+		goto disable_irqs;
 
 	dev_info(qproc->dev, "MBA booted, loading mpss\n");
 
@@ -897,40 +971,7 @@ static int q6v5_start(struct rproc *rproc)
 						false, qproc->mpss_phys,
 						qproc->mpss_size);
 	WARN_ON(xfermemop_ret);
-
-halt_axi_ports:
-	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
-	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
-	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
-
-reclaim_mba:
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
-						qproc->mba_phys,
-						qproc->mba_size);
-	if (xfermemop_ret) {
-		dev_err(qproc->dev,
-			"Failed to reclaim mba buffer, system may become unstable\n");
-	}
-
-disable_active_clks:
-	q6v5_clk_disable(qproc->dev, qproc->active_clks,
-			 qproc->active_clk_count);
-
-assert_reset:
-	q6v5_reset_assert(qproc);
-disable_reset_clks:
-	q6v5_clk_disable(qproc->dev, qproc->reset_clks,
-			 qproc->reset_clk_count);
-disable_vdd:
-	q6v5_regulator_disable(qproc, qproc->active_regs,
-			       qproc->active_reg_count);
-disable_proxy_clk:
-	q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
-			 qproc->proxy_clk_count);
-disable_proxy_reg:
-	q6v5_regulator_disable(qproc, qproc->proxy_regs,
-			       qproc->proxy_reg_count);
-
+	q6v5_mba_reclaim(qproc);
 disable_irqs:
 	qcom_q6v5_unprepare(&qproc->q6v5);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 16:23 [PATCH v4 0/5] Add coredump support for Q6v5 Modem remoteproc Sibi Sankar
2018-10-09 16:23 ` [PATCH v4 1/5] remoteproc: Introduce custom dump function for each remoteproc segment Sibi Sankar
2018-10-09 16:23 ` [PATCH v4 2/5] remoteproc: Add mechanism for custom dump function assignment Sibi Sankar
2018-10-09 16:23 ` Sibi Sankar [this message]
2018-10-09 16:23 ` [PATCH v4 4/5] remoteproc: qcom: q6v5-mss: Add custom dump function for modem Sibi Sankar
2018-10-09 16:23 ` [PATCH v4 5/5] remoteproc: qcom: q6v5-mss: Register segments/dumpfn for coredump Sibi Sankar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181009162339.30522-4-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=akdwived@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=kyan@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=sricharan@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox