linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Emil Renner Berthing <kernel@esmil.dk>
Cc: Mark Brown <broonie@kernel.org>,
	linux-rockchip@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Heiko Stuebner <heiko@sntech.de>, Mark Brown <broonie@kernel.org>,
	Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Brian Norris <briannorris@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	Shunqian Zheng <zhengsq@rock-chips.com>,
	Nickey Yang <nickey.yang@rock-chips.com>,
	Klaus Goger <klaus.goger@theobroma-systems.com>,
	Randy Li <ayaka@soulik.info>, Chris Zhong <zyw@rock-chips.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-spi@vger.kernel.org
Subject: Applied "spi: rockchip: simplify spi enable logic" to the spi tree
Date: Thu, 11 Oct 2018 15:55:53 +0100 (BST)	[thread overview]
Message-ID: <20181011145553.07C8111223ED@debutante.sirena.org.uk> (raw)
In-Reply-To: <20181010090038.20834-8-kernel@esmil.dk>

The patch

   spi: rockchip: simplify spi enable logic

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From a3c174021ce780f5d2e9b2105e2cb4903a37226d Mon Sep 17 00:00:00 2001
From: Emil Renner Berthing <kernel@esmil.dk>
Date: Wed, 10 Oct 2018 11:00:38 +0200
Subject: [PATCH] spi: rockchip: simplify spi enable logic

Let the dma/non-dma code paths handle the spi enable
flag themselves. This removes some logic to determine
if the flag should be turned on before or after dma
and also don't leave the spi enabled if the dma path
fails.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-rockchip.c | 28 +++++++++-------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 6fa809da61dd..ffa564fbf970 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -379,6 +379,8 @@ static int rockchip_spi_pio_transfer(struct rockchip_spi *rs)
 {
 	int remain = 0;
 
+	spi_enable_chip(rs, 1);
+
 	do {
 		if (rs->tx) {
 			remain = rs->tx_end - rs->tx;
@@ -498,6 +500,8 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
 		dma_async_issue_pending(rs->dma_rx.ch);
 	}
 
+	spi_enable_chip(rs, 1);
+
 	if (txdesc) {
 		spin_lock_irqsave(&rs->lock, flags);
 		rs->state |= TXBUSY;
@@ -506,7 +510,8 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
 		dma_async_issue_pending(rs->dma_tx.ch);
 	}
 
-	return 0;
+	/* 1 means the transfer is in progress */
+	return 1;
 }
 
 static void rockchip_spi_config(struct rockchip_spi *rs)
@@ -589,7 +594,6 @@ static int rockchip_spi_transfer_one(
 		struct spi_device *spi,
 		struct spi_transfer *xfer)
 {
-	int ret = 0;
 	struct rockchip_spi *rs = spi_master_get_devdata(master);
 
 	WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) &&
@@ -633,24 +637,10 @@ static int rockchip_spi_transfer_one(
 
 	rockchip_spi_config(rs);
 
-	if (rs->use_dma) {
-		if (rs->tmode == CR0_XFM_RO) {
-			/* rx: dma must be prepared first */
-			ret = rockchip_spi_prepare_dma(rs);
-			spi_enable_chip(rs, 1);
-		} else {
-			/* tx or tr: spi must be enabled first */
-			spi_enable_chip(rs, 1);
-			ret = rockchip_spi_prepare_dma(rs);
-		}
-		/* successful DMA prepare means the transfer is in progress */
-		ret = ret ? ret : 1;
-	} else {
-		spi_enable_chip(rs, 1);
-		ret = rockchip_spi_pio_transfer(rs);
-	}
+	if (rs->use_dma)
+		return rockchip_spi_prepare_dma(rs);
 
-	return ret;
+	return rockchip_spi_pio_transfer(rs);
 }
 
 static bool rockchip_spi_can_dma(struct spi_master *master,
-- 
2.19.0.rc2


      reply	other threads:[~2018-10-11 14:56 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-10  9:00 [PATCH 0/7] Enable spi dma on Rockchip RK3399 Emil Renner Berthing
2018-10-10  9:00 ` [PATCH 1/7] spi: rockchip: initialize dma_slave_config properly Emil Renner Berthing
2018-10-11 14:56   ` Applied "spi: rockchip: initialize dma_slave_config properly" to the spi tree Mark Brown
2018-10-10  9:00 ` [PATCH 2/7] spi: rockchip: adjust dma watermark and burstlen Emil Renner Berthing
2018-10-11 14:56   ` Applied "spi: rockchip: adjust dma watermark and burstlen" to the spi tree Mark Brown
2018-10-10  9:00 ` [PATCH 3/7] arm64: dts: rockchip: add rk3399 SPI DMAs Emil Renner Berthing
2018-10-16 12:32   ` Heiko Stuebner
2018-10-10  9:00 ` [PATCH 4/7] spi: rockchip: remove unneeded dma_caps Emil Renner Berthing
2018-10-11 14:56   ` Applied "spi: rockchip: remove unneeded dma_caps" to the spi tree Mark Brown
2018-10-10  9:00 ` [PATCH 5/7] spi: rockchip: mark use_dma as bool Emil Renner Berthing
2018-10-11 14:56   ` Applied "spi: rockchip: mark use_dma as bool" to the spi tree Mark Brown
2018-10-10  9:00 ` [PATCH 6/7] spi: rockchip: directly use direction constants Emil Renner Berthing
2018-10-11 14:55   ` Applied "spi: rockchip: directly use direction constants" to the spi tree Mark Brown
2018-10-10  9:00 ` [PATCH 7/7] spi: rockchip: simplify spi enable logic Emil Renner Berthing
2018-10-11 14:55   ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181011145553.07C8111223ED@debutante.sirena.org.uk \
    --to=broonie@kernel.org \
    --cc=ayaka@soulik.info \
    --cc=briannorris@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=enric.balletbo@collabora.com \
    --cc=heiko@sntech.de \
    --cc=kernel@esmil.dk \
    --cc=klaus.goger@theobroma-systems.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nickey.yang@rock-chips.com \
    --cc=robh+dt@kernel.org \
    --cc=zhengsq@rock-chips.com \
    --cc=zyw@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).