From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <lee.jones@linaro.org>, <tony@atomide.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v3 4/9] dt-bindings: leds: Add bindings for lm3697 driver
Date: Thu, 11 Oct 2018 11:51:18 -0500 [thread overview]
Message-ID: <20181011165123.32198-5-dmurphy@ti.com> (raw)
In-Reply-To: <20181011165123.32198-1-dmurphy@ti.com>
Add the device tree bindings for the lm3697
LED driver for backlighting and display.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../devicetree/bindings/leds/leds-lm3697.txt | 98 +++++++++++++++++++
1 file changed, 98 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
new file mode 100644
index 000000000000..4bb2ed51025b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
@@ -0,0 +1,98 @@
+* Texas Instruments - LM3697 Highly Efficient White LED Driver
+
+The LM3697 11-bit LED driver provides high-
+performance backlight dimming for 1, 2, or 3 series
+LED strings while delivering up to 90% efficiency.
+
+This device is suitable for display and keypad Lighting
+
+Required properties:
+ - compatible:
+ "ti,lm3697"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional properties:
+ - enable-gpios : GPIO pin to enable/disable the device
+ - vled-supply : LED supply
+
+Required child properties:
+ - reg : 0 - LED is Controlled by bank A
+ 1 - LED is Controlled by bank B
+ - led-sources : Indicates which HVLED string is associated to which
+ control bank. Each element in the array is associated
+ with a specific HVLED string. Element 0 is HVLED1,
+ element 1 is HVLED2 and element 2 HVLED3.
+ Additional information is contained
+ in Documentation/devicetree/bindings/leds/common.txt
+ 0 - HVLED is not active in this control bank
+ 1 - HVLED string is controlled by this control bank
+
+Optional child properties:
+ - runtime-ramp-up-msec: Current ramping from one brightness level to
+ the a higher brightness level.
+ Range from 2048 us - 117.44 s
+ - runtime-ramp-down-msec: Current ramping from one brightness level to
+ the a lower brightness level.
+ Range from 2048 us - 117.44 s
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is
+controlled by control bank B.
+
+led-controller@36 {
+ compatible = "ti,lm3697";
+ reg = <0x36>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <1 0 1>;
+ runtime-ramp-up-msec = <5000>;
+ runtime-ramp-down-msec = <1000>;
+ label = "white:first_backlight_cluster";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <0 1 0>;
+ runtime-ramp-up-msec = <500>;
+ runtime-ramp-down-msec = <1000>;
+ label = "white:second_backlight_cluster";
+ linux,default-trigger = "backlight";
+ };
+}
+
+All HVLED strings controlled by control bank A
+
+led-controller@36 {
+ compatible = "ti,lm3697";
+ reg = <0x36>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <1 1 1>;
+ runtime-ramp-up-msec = <500>;
+ runtime-ramp-down-msec = <1000>;
+ label = "white:backlight_cluster";
+ linux,default-trigger = "backlight";
+ };
+}
+
+For more product information please see the link below:
+http://www.ti.com/lit/ds/symlink/lm3697.pdf
--
2.19.0
next prev parent reply other threads:[~2018-10-11 16:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 16:51 [PATCH v3 0/9] TI LMU common Framework Dan Murphy
2018-10-11 16:51 ` [PATCH v3 1/9] leds: add TI LMU backlight driver Dan Murphy
2018-10-11 16:51 ` [PATCH v3 2/9] dt-bindings: ti-lmu: Remove LM3697 Dan Murphy
2018-10-11 18:27 ` Pavel Machek
2018-10-11 18:34 ` Dan Murphy
2018-10-11 19:38 ` Jacek Anaszewski
2018-10-12 16:26 ` Rob Herring
2018-10-12 18:03 ` Pavel Machek
2018-10-13 18:45 ` Jacek Anaszewski
2018-10-15 0:56 ` Rob Herring
2018-10-15 19:13 ` Jacek Anaszewski
2018-10-15 19:14 ` Dan Murphy
2018-10-15 21:45 ` Pavel Machek
2018-10-16 13:25 ` Dan Murphy
2018-10-18 22:10 ` Pavel Machek
2018-10-19 11:42 ` Dan Murphy
2018-10-19 14:58 ` Tony Lindgren
2018-10-24 8:55 ` Pavel Machek
2018-10-12 9:07 ` Lee Jones
2018-10-11 16:51 ` [PATCH v3 3/9] mfd: ti-lmu: Remove support for LM3697 Dan Murphy
2018-10-11 16:51 ` Dan Murphy [this message]
2018-10-12 16:27 ` [PATCH v3 4/9] dt-bindings: leds: Add bindings for lm3697 driver Rob Herring
2018-10-19 11:47 ` Dan Murphy
2018-10-11 16:51 ` [PATCH v3 5/9] leds: lm3697: Introduce the " Dan Murphy
2018-10-11 16:51 ` [PATCH v3 6/9] dt-bindings: ti-lmu: Remove LM3633 Dan Murphy
2018-10-11 16:51 ` [PATCH v3 7/9] mfd: ti-lmu: Remove support for LM3633 Dan Murphy
2018-10-11 16:51 ` [PATCH v3 8/9] dt-bindings: leds: Add support for the LM3633 Dan Murphy
2018-10-11 16:51 ` [PATCH v3 9/9] leds: lm3633: Introduce the lm3633 driver Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181011165123.32198-5-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).