linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Stephen Boyd <sboyd@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v2 18/22] ARM: dts: at91: at91sam9260: switch to new clock bindings
Date: Tue, 16 Oct 2018 16:21:56 +0200	[thread overview]
Message-ID: <20181016142200.19741-19-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20181016142200.19741-1-alexandre.belloni@bootlin.com>

Switch at91sam9260 and at91sam9g20 boards to the new PMC clock bindings.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/arm/boot/dts/at91sam9260.dtsi | 308 +++--------------------------
 arch/arm/boot/dts/at91sam9g20.dtsi |  23 +--
 2 files changed, 31 insertions(+), 300 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 9118e29b6d6a..7cd9c3bc4dfb 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -113,276 +113,28 @@
 				compatible = "atmel,at91sam9260-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "fixed-clock";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9260-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_xtal>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
-								<150000000 240000000 2 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 5000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 105000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 4 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <11>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					tc3_clk: tc3_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					tc4_clk: tc4_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					tc5_clk: tc5_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
 			};
 
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
-				clocks = <&clk32k>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
-				clocks = <&clk32k>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 			};
 
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			tcb0: timer@fffa0000 {
@@ -393,7 +145,7 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
@@ -405,7 +157,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
 					      27 IRQ_TYPE_LEVEL_HIGH 0
 					      28 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
@@ -746,7 +498,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -757,7 +509,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -768,7 +520,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 			};
 
@@ -778,7 +530,7 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -791,7 +543,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -804,7 +556,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -817,7 +569,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -830,7 +582,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -843,7 +595,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -856,7 +608,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&uart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -867,7 +619,7 @@
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
@@ -876,7 +628,7 @@
 				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -887,7 +639,7 @@
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				status = "disabled";
 			};
 
@@ -898,7 +650,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pinctrl-names = "default";
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -909,7 +661,7 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -922,7 +674,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -935,7 +687,7 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -946,7 +698,7 @@
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xf>;
@@ -981,7 +733,7 @@
 				compatible = "atmel,at91sam9260-rtt";
 				reg = <0xfffffd20 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				status = "disabled";
 			};
 
@@ -989,7 +741,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1007,7 +759,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
@@ -1027,7 +779,7 @@
 				  0x5 0x0 0x60000000 0x10000000
 				  0x6 0x0 0x70000000 0x10000000
 				  0x7 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
 
 			nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 90705ee6008b..e976fd6bc6fd 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -40,28 +40,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				plla: pllack {
-					atmel,clk-input-range = <2000000 32000000>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
-								<695000000 750000000 1 0>,
-								<645000000 700000000 2 0>,
-								<595000000 650000000 3 0>,
-								<545000000 600000000 0 1>,
-								<495000000 550000000 1 1>,
-								<445000000 500000000 2 1>,
-								<400000000 450000000 3 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91sam9g20-clk-pllb";
-					atmel,clk-input-range = <2000000 32000000>;
-					atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
-				};
-
-				mck: masterck {
-					atmel,clk-output-range = <0 133000000>;
-					atmel,clk-divisors = <1 2 4 6>;
-				};
+				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
 			};
 		};
 	};
-- 
2.19.1


  parent reply	other threads:[~2018-10-16 14:22 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-16 14:21 [PATCH v2 00/22] clk: at91: Rework DT bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 01/22] clk: at91: audio-pll: fix audio pmc type Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 02/22] clk: at91: generated: SSCs don't have a gclk Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 03/22] clk: at91: h32mx: separate registration from DT parsing Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 04/22] clk: at91: audio-pll: " Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 05/22] clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated() Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 06/22] clk: at91: allow clock registration from C code Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 07/22] clk: at91: add pmc_data struct and helpers Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 08/22] dt-bindings: clk: at91: Document new PMC binding Alexandre Belloni
2018-10-17 17:49   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 09/22] clk: at91: add new DT lookup function Alexandre Belloni
2018-10-17 17:50   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 10/22] clk: at91: add sama5d4 pmc driver Alexandre Belloni
2018-10-17 17:50   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 11/22] clk: at91: add sama5d2 PMC driver Alexandre Belloni
2018-10-17 17:50   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 12/22] clk: at91: add at91sam9260 " Alexandre Belloni
2018-10-17 17:50   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 13/22] clk: at91: add at91sam9x5 PMCs driver Alexandre Belloni
2018-10-17 17:50   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 14/22] clk: at91: add at91sam9rl PMC driver Alexandre Belloni
2018-10-17 17:50   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 15/22] clk: at91: move DT compatibility code to its own file Alexandre Belloni
2018-10-17 17:50   ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 16/22] ARM: dts: at91: sama5d4: switch to new clock bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 17/22] ARM: dts: at91: sama5d2: switch to new binding Alexandre Belloni
2018-10-16 14:21 ` Alexandre Belloni [this message]
2018-10-16 14:21 ` [PATCH v2 19/22] ARM: dts: at91: at91sam9261: switch to new clock bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 20/22] ARM: dts: at91: at91sam9263: " Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 21/22] ARM: dts: at91: at91sam9x5: " Alexandre Belloni
2018-10-16 14:22 ` [PATCH v2 22/22] ARM: dts: at91: at91sam9rl: " Alexandre Belloni
2018-10-17 16:50 ` [PATCH v2 00/22] clk: at91: Rework DT bindings Stephen Boyd
2018-10-17 17:27   ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181016142200.19741-19-alexandre.belloni@bootlin.com \
    --to=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=sboyd@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --subject='Re: [PATCH v2 18/22] ARM: dts: at91: at91sam9260: switch to new clock bindings' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).