linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.4 29/48] net: systemport: Fix wake-up interrupt race during resume
Date: Thu, 18 Oct 2018 19:55:04 +0200	[thread overview]
Message-ID: <20181018175429.529030981@linuxfoundation.org> (raw)
In-Reply-To: <20181018175427.133690306@linuxfoundation.org>

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ]

The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.

The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.

This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.

The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.

Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -850,14 +850,22 @@ static void bcm_sysport_resume_from_wol(
 {
 	u32 reg;
 
-	/* Stop monitoring MPD interrupt */
-	intrl2_0_mask_set(priv, INTRL2_0_MPD);
-
 	/* Clear the MagicPacket detection logic */
 	reg = umac_readl(priv, UMAC_MPD_CTRL);
 	reg &= ~MPD_EN;
 	umac_writel(priv, reg, UMAC_MPD_CTRL);
 
+	reg = intrl2_0_readl(priv, INTRL2_CPU_STATUS);
+	if (reg & INTRL2_0_MPD)
+		netdev_info(priv->netdev, "Wake-on-LAN (MPD) interrupt!\n");
+
+	if (reg & INTRL2_0_BRCM_MATCH_TAG) {
+		reg = rxchk_readl(priv, RXCHK_BRCM_TAG_MATCH_STATUS) &
+				  RXCHK_BRCM_TAG_MATCH_MASK;
+		netdev_info(priv->netdev,
+			    "Wake-on-LAN (filters 0x%02x) interrupt!\n", reg);
+	}
+
 	netif_dbg(priv, wol, priv->netdev, "resumed from WOL\n");
 }
 
@@ -890,11 +898,6 @@ static irqreturn_t bcm_sysport_rx_isr(in
 	if (priv->irq0_stat & INTRL2_0_TX_RING_FULL)
 		bcm_sysport_tx_reclaim_all(priv);
 
-	if (priv->irq0_stat & INTRL2_0_MPD) {
-		netdev_info(priv->netdev, "Wake-on-LAN interrupt!\n");
-		bcm_sysport_resume_from_wol(priv);
-	}
-
 	return IRQ_HANDLED;
 }
 
@@ -1915,9 +1918,6 @@ static int bcm_sysport_suspend_to_wol(st
 	/* UniMAC receive needs to be turned on */
 	umac_enable_set(priv, CMD_RX_EN, 1);
 
-	/* Enable the interrupt wake-up source */
-	intrl2_0_mask_clear(priv, INTRL2_0_MPD);
-
 	netif_dbg(priv, wol, ndev, "entered WOL mode\n");
 
 	return 0;



  parent reply	other threads:[~2018-10-18 18:06 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-18 17:54 [PATCH 4.4 00/48] 4.4.162-stable review Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 01/48] ASoC: wm8804: Add ACPI support Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 02/48] ASoC: sigmadsp: safeload should not have lower byte limit Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 03/48] selftests/efivarfs: add required kernel configs Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 04/48] mfd: omap-usb-host: Fix dts probe of children Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 05/48] sound: enable interrupt after dma buffer initialization Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 06/48] stmmac: fix valid numbers of unicast filter entries Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 07/48] net: macb: disable scatter-gather for macb on sama5d3 Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 08/48] ARM: dts: at91: add new compatibility string " Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 09/48] drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 10/48] ext4: add corruption check in ext4_xattr_set_entry() Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 11/48] mm/vmstat.c: fix outdated vmstat_text Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 12/48] mach64: detect the dot clock divider correctly on sparc Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 13/48] perf script python: Fix export-to-postgresql.py occasional failure Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 14/48] i2c: i2c-scmi: fix for i2c_smbus_write_block_data Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 15/48] xhci: Dont print a warning when setting link state for disabled ports Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 16/48] jffs2: return -ERANGE when xattr buffer is too small Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 17/48] bnxt_en: Fix TX timeout during netpoll Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 18/48] bonding: avoid possible dead-lock Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 19/48] ip6_tunnel: be careful when accessing the inner header Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 20/48] ip_tunnel: " Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 21/48] ipv4: fix use-after-free in ip_cmsg_recv_dstaddr() Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 22/48] net: ipv4: update fnhe_pmtu when first hops MTU changes Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 23/48] net/ipv6: Display all addresses in output of /proc/net/if_inet6 Greg Kroah-Hartman
2018-10-18 17:54 ` [PATCH 4.4 24/48] netlabel: check for IPV4MASK in addrinfo_get Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 25/48] net/usb: cancel pending work when unbinding smsc75xx Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 26/48] qlcnic: fix Tx descriptor corruption on 82xx devices Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 27/48] team: Forbid enslaving team device to itself Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 28/48] net: mvpp2: Extract the correct ethtype from the skb for tx csum offload Greg Kroah-Hartman
2018-10-18 17:55 ` Greg Kroah-Hartman [this message]
2018-10-18 17:55 ` [PATCH 4.4 30/48] rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096 Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 31/48] KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 32/48] x86/fpu: Remove use_eager_fpu() Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 33/48] x86/fpu: Remove struct fpu::counter Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 34/48] x86/fpu: Finish excising eagerfpu Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 35/48] media: af9035: prevent buffer overflow on write Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 36/48] clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 37/48] Input: atakbd - fix Atari keymap Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 38/48] Input: atakbd - fix Atari CapsLock behaviour Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 39/48] net/mlx4: Use cpumask_available for eq->affinity_mask Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 40/48] RISC-V: include linux/ftrace.h in asm-prototypes.h Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 41/48] powerpc/tm: Fix userspace r13 corruption Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 42/48] powerpc/tm: Avoid possible userspace r1 corruption on reclaim Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 43/48] ARC: build: Get rid of toolchain check Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 44/48] usb: gadget: serial: fix oops when data rxd after close Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 45/48] Drivers: hv: utils: Invoke the poll function after handshake Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 46/48] Drivers: hv: util: Pass the channel information during the init call Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 47/48] Drivers: hv: kvp: fix IP Failover Greg Kroah-Hartman
2018-10-18 17:55 ` [PATCH 4.4 48/48] HV: properly delay KVP packets when negotiation is in progress Greg Kroah-Hartman
2018-10-19  1:40 ` [PATCH 4.4 00/48] 4.4.162-stable review Nathan Chancellor
2018-10-19  8:40 ` Sebastian Gottschall
2018-10-19  9:15   ` Greg Kroah-Hartman
2018-10-19 13:58 ` Rafael David Tinoco
2018-10-19 19:50 ` Guenter Roeck
2018-10-19 20:47 ` Shuah Khan
2018-10-19 22:30 ` Shuah Khan
2018-10-22 13:05 ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181018175429.529030981@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).