[RFC PATCH 0/2] improve vmalloc allocation

[RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki (Sony)]

Objective
---------
Initiative of improving vmalloc allocator comes from getting many issues
related to allocation time, i.e. sometimes it is terribly slow. As a result
many workloads which are sensitive for long (more than 1 millisecond) preemption
off scenario are affected by that slowness(test cases like UI or audio, etc.).

The problem is that, currently an allocation of the new VA area is done over
busy list iteration until a suitable hole is found between two busy areas.
Therefore each new allocation causes the list being grown. Due to long list
and different permissive parameters an allocation can take a long time on
embedded devices(milliseconds).

Description
-----------
This approach keeps track of free blocks and allocation is done over free list
iteration instead. During initialization phase the vmalloc memory layout is
organized into one free area(can be more) building free double linked list
within VMALLOC_START-VMALLOC_END range.

Proposed algorithm uses red-black tree that keeps blocks sorted by their offsets
in pair with linked list keeping the free space in order of increasing addresses.

Allocation. It uses a first-fit policy. To allocate a new block a search is done
over free list areas until a first suitable block is large enough to encompass
the requested size. If the block is bigger than requested size - it is split.

A free block can be split by three different ways. Their names are FL_FIT_TYPE,
LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e. they correspond to how requested
size and alignment fit to a free block.

FL_FIT_TYPE - in this case a free block is just removed from the free list/tree
because it fully fits. Comparing with current design there is an extra work with
rb-tree updating.

LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit. In this case what we do is
just cutting a free block. It is as fast as a current design. Most of the vmalloc
allocations just end up with this case, because the edge is always aligned to 1.

NE_FIT_TYPE - Is much less common case. Basically it happens when requested size
and alignment does not fit left nor right edges, i.e. it is between them. In this
case during splitting we have to build a remaining left free area and place it
back to the free list/tree.

Comparing with current design there are two extra steps. First one is we have to
allocate a new vmap_area structure. Second one we have to insert that remaining 
free block to the address sorted list/tree.

In order to optimize a first case there is a cache with free_vmap objects. Instead
of allocating from slab we just take an object from the cache and reuse it.

Second one is pretty optimized. Since we know a start point in the tree we do not
do a search from the top. Instead a traversal begins from a rb-tree node we split.

De-allocation. Red-black tree allows efficiently find a spot in the tree whereas
a linked list allows fast access to neighbors, thus a fast merge of de-allocated
memory chunks with existing free blocks creating large coalesced areas. It means
comparing with current design there is an extra step we have to done when a block
is freed.

In order to optimize a merge logic a free vmap area is not inserted straight
away into free structures. Instead we find a place in the rbtree where a free
block potentially can be inserted. Its parent node and left or right direction.
Knowing that, we can identify future next/prev list nodes, thus at this point
it becomes possible to check if a block can be merged. If not, just link it.

Test environment
----------------
I have used two systems to test. One is i5-3320M CPU @ 2.60GHz and another
is HiKey960(arm64) board. i5-3320M runs on 4.18 kernel, whereas Hikey960
uses 4.15 linaro kernel.

i5-3320M:
set performance governor
echo 0 > /proc/sys/kernel/nmi_watchdog
echo -1 > /proc/sys/kernel/perf_event_paranoid
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo

Stability and stress tests
--------------------------
As for stress testing of the new approach, i wrote a small patch with
different test cases and allocations methods to make a pressure on
vmalloc subsystem. In short, it runs different kind of allocation
tests simultaneously on each online CPU with different run-time(few days).

A test-suite patch you can find here, it is based on 4.18 kernel.
ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch

Below are some issues i run into during stability check phase(default kernel).

1) This Kernel BUG can be triggered by align_shift_alloc_test() stress test.
See it in test-suite patch:

<snip>
[66970.279289] kernel BUG at mm/vmalloc.c:512!
[66970.279363] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[66970.279411] CPU: 1 PID: 652 Comm: insmod Tainted: G           O      4.18.0+ #741
[66970.279463] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[66970.279525] RIP: 0010:alloc_vmap_area+0x358/0x370
<snip>

Patched version does not suffer from that BUG().

2) This one has been introduced by commit 763b218ddfaf. Which introduced some
preemption points into __purge_vmap_area_lazy(). Under heavy simultaneous
allocations/releases number of lazy pages can easily go beyond millions
hitting out_of_memory -> panic or making operations like: allocation, lookup,
unmap, remove, etc. much slower.

It is fixed by second commit in this series. Please see more description in
the commit message of the patch.

3) This one is related to PCPU allocator(see pcpu_alloc_test()). In that
stress test case i see that SUnreclaim(/proc/meminfo) parameter gets increased,
i.e. there is a memory leek somewhere in percpu allocator. It sounds like
a memory that is allocated by pcpu_get_vm_areas() sometimes is not freed.
Resulting in memory leaking or "Kernel panic":

---[ end Kernel panic - not syncing: Out of memory and no killable processes...

There is no fix for that.

Performance test results
------------------------
I run 5 different tests to compare the performance between the new approach
and current one. Since there are three different type of allocations i wanted
to compare them with default version, apart of those there are two extra.
One allocates in long busy list condition. Another one does random number
of pages allocation(will not post here to keep it short).

- reboot the system;
- do three iteration of full run. One run is 5 tests;
- calculate average of three run(microseconds).

i5-3320M:
le_fit_alloc_test                b_fit_alloc_test
1218459 vs 1146597 diff 5%       972322 vs 1008655 diff -3.74%
1219721 vs 1145212 diff 6%      1013817 vs  994195 diff  1.94%
1226255 vs 1142134 diff 6%      1002057 vs  993364 diff  0.87%
1239828 vs 1144809 diff 7%       985092 vs  977549 diff  0.77%
1232131 vs 1144775 diff 7%      1031320 vs  999952 diff  3.04%

ne_fit_alloc_test                long_busy_list_alloc_test
2056336 vs 2043121 diff 0.64%    55866315 vs 15037680 diff 73%
2043136 vs 2041888 diff 0.06%    57601435 vs 14809454 diff 74%
2042384 vs 2040181 diff 0.11%    52612371 vs 14550292 diff 72%
2041287 vs 2038905 diff 0.12%    48894648 vs 14769538 diff 69%
2039014 vs 2038632 diff 0.02%    55718063 vs 14727350 diff 73%

Hikey960:
le_fit_alloc_test                b_fit_alloc_test
2382168 vs 2115617 diff 11.19%   2864080 vs 2081309 diff 27.33%
2772909 vs 2114988 diff 23.73%   2968612 vs 2062716 diff 30.52%
2772579 vs 2113069 diff 23.79%   2748495 vs 2106658 diff 23.35%
2770596 vs 2111823 diff 23.78%   2966023 vs 2071139 diff 30.17%
2759768 vs 2111868 diff 23.48%   2765568 vs 2125216 diff 23.15%

ne_fit_alloc_test                long_busy_list_alloc_test
4353846 vs 4241838 diff  2.57    239789754 vs 33364305 diff 86%
4133506 vs 4241615 diff -2.62    778283461 vs 34551548 diff 95%
4134769 vs 4240714 diff -2.56    210244212 vs 33467529 diff 84%
4132224 vs 4242281 diff -2.66    429232377 vs 33307173 diff 92%
4410969 vs 4240864 diff  3.86    527560967 vs 33661115 diff 93%

Almost all results are better. Full data and the test module you can find here:

ftp://vps418301.ovh.net/incoming/vmalloc_test_module.tar.bz2
ftp://vps418301.ovh.net/incoming/HiKey960_test_result.txt
ftp://vps418301.ovh.net/incoming/i5-3320M_test_result.txt

Conclusion
----------
According to provided results and my subjective opinion, it is worth to organize
and maintain a free list and do an allocation based on it.

Appreciate for any valuable comments and sorry for the long description :)

Best Regards,
Uladzislau Rezki

Uladzislau Rezki (Sony) (2):
  mm/vmalloc: keep track of free blocks for allocation
  mm: add priority threshold to __purge_vmap_area_lazy()

 include/linux/vmalloc.h |   2 +-
 mm/vmalloc.c            | 850 ++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 676 insertions(+), 176 deletions(-)

-- 
2.11.0

[RFC PATCH 1/2] mm/vmalloc: keep track of free blocks for allocation

[Uladzislau Rezki (Sony)]

Currently an allocation of the new VA area is done over
busy list iteration until a suitable hole is found between
two busy areas. Therefore each new allocation causes the
list being grown. Due to long list and different permissive
parameters an allocation can take a long time on embedded
devices(milliseconds).

This patch organizes the vmalloc memory layout into free
areas of the VMALLOC_START-VMALLOC_END range. It uses a
red-black tree that keeps blocks sorted by their offsets
in pair with linked list keeping the free space in order
of increasing addresses.

Allocation: to allocate a new block a search is done over
free list areas until a suitable block is large enough to
encompass the requested size. If the block is bigger than
requested size - it is split.

De-allocation: red-black tree allows efficiently find a
spot in the tree whereas a linked list allows fast merge
of de-allocated memory chunks with existing free blocks
creating large coalesced areas.

model name: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz

test_1:
<measure this loop time>
for (n = 0; n < 1000000; n++) {
    void *ptr_1 = vmalloc(3 * PAGE_SIZE);
    *((__u8 *)ptr_1) = 0; /* Pretend we used the mem */
    vfree(ptr_1);
}
<measure this loop time>

1218459(us) vs 1146597(us) 5%
1219721(us) vs 1145212(us) 6%
1226255(us) vs 1142134(us) 6%
1239828(us) vs 1144809(us) 7%
1232131(us) vs 1144775(us) 7%

test_2:
for (n = 0; n < 15000; n++)
    ptr[n] = vmalloc(1 * PAGE_SIZE);

<measure this loop time>
for (n = 0; n < 1000000; n++) {
    void *ptr_1 = vmalloc(100 * PAGE_SIZE);
    void *ptr_2 = vmalloc(1 * PAGE_SIZE);
    *((__u8 *)ptr_1) = 0; /* Pretend we used the mem */
    *((__u8 *)ptr_2) = 1; /* Pretend we used the mem */

    vfree(ptr_1);
    vfree(ptr_2);
}
<measure this loop time>

55866315(us) vs 15037680(us) 73%
57601435(us) vs 14809454(us) 74%
52612371(us) vs 14550292(us) 72%
48894648(us) vs 14769538(us) 69%
55718063(us) vs 14727350(us) 73%

Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 include/linux/vmalloc.h |   2 +-
 mm/vmalloc.c            | 836 ++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 668 insertions(+), 170 deletions(-)

diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 398e9c95cd61..01a73d4795f4 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -46,11 +46,11 @@ struct vmap_area {
 	unsigned long va_start;
 	unsigned long va_end;
 	unsigned long flags;
+	unsigned long align;
 	struct rb_node rb_node;         /* address sorted rbtree */
 	struct list_head list;          /* address sorted list */
 	struct llist_node purge_list;    /* "lazy purge" list */
 	struct vm_struct *vm;
-	struct rcu_head rcu_head;
 };
 
 /*
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index cfea25be7754..a7f257540a05 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -326,12 +326,57 @@ EXPORT_SYMBOL(vmalloc_to_pfn);
 #define VM_LAZY_FREE	0x02
 #define VM_VM_AREA	0x04
 
+/*
+ * Define default padding for alignment purposes.
+ */
+#define VMALLOC_MAX_PADDING THREAD_ALIGN
+
 static DEFINE_SPINLOCK(vmap_area_lock);
 /* Export for kexec only */
 LIST_HEAD(vmap_area_list);
 static LLIST_HEAD(vmap_purge_list);
 static struct rb_root vmap_area_root = RB_ROOT;
 
+/*
+ * This linked list is used in pair with free_vmap_area_root.
+ * It makes it possible of fast accessing to next/prev nodes
+ * to perform coalescing.
+ */
+static LIST_HEAD(free_vmap_area_list);
+
+/*
+ * This red-black tree is used for storing address-sorted
+ * vmap areas during free operation. Sorting is done using
+ * va_start address. We make use of it to merge a VA with
+ * its prev/next neighbors.
+ */
+static struct rb_root free_vmap_area_root = RB_ROOT;
+
+/*
+ * This cache list is used for keeping free vmap_area objects.
+ * Basically, when free VA area is split, a remaining space has
+ * to be placed back to free list/tree structures. Instead of
+ * allocating from slab we reuse vmap_area objects from this
+ * cache.
+ */
+static LIST_HEAD(free_va_cache);
+
+/*
+ * This is a cache size counter. A maximum cache size depends on
+ * lazy_max_pages() and is not higher than lazy_max_pages() / 2.
+ * A "purge layer" drains free areas feeding the cache back when
+ * the threshold is crossed.
+ */
+static unsigned long free_va_cache_size;
+
+/*
+ * For vmalloc specific area allocation.
+ */
+static struct vmap_area *last_free_area;
+static unsigned long last_alloc_vstart;
+static unsigned long last_alloc_align;
+static unsigned long free_va_max_size;
+
 /* The vmap cache globals are protected by vmap_area_lock */
 static struct rb_node *free_vmap_cache;
 static unsigned long cached_hole_size;
@@ -340,6 +385,10 @@ static unsigned long cached_align;
 
 static unsigned long vmap_area_pcpu_hole;
 
+static void purge_vmap_area_lazy(void);
+static BLOCKING_NOTIFIER_HEAD(vmap_notify_list);
+static unsigned long lazy_max_pages(void);
+
 static struct vmap_area *__find_vmap_area(unsigned long addr)
 {
 	struct rb_node *n = vmap_area_root.rb_node;
@@ -359,41 +408,411 @@ static struct vmap_area *__find_vmap_area(unsigned long addr)
 	return NULL;
 }
 
-static void __insert_vmap_area(struct vmap_area *va)
+static inline bool
+__put_free_va_to_cache(struct vmap_area *va)
+{
+	if (free_va_cache_size < (lazy_max_pages() >> 1)) {
+		list_add(&va->list, &free_va_cache);
+		free_va_cache_size++;
+		return true;
+	}
+
+	return false;
+}
+
+static inline void *
+__get_free_va_from_cache(void)
 {
-	struct rb_node **p = &vmap_area_root.rb_node;
-	struct rb_node *parent = NULL;
-	struct rb_node *tmp;
+	struct vmap_area *va;
+
+	va = list_first_entry_or_null(&free_va_cache,
+			struct vmap_area, list);
+
+	if (va) {
+		list_del(&va->list);
+		free_va_cache_size--;
+	}
 
-	while (*p) {
-		struct vmap_area *tmp_va;
+	return va;
+}
+
+static inline void
+__find_va_slot(struct vmap_area *va,
+	struct rb_root *root, struct rb_node *from,
+	struct rb_node **parent, struct rb_node ***link)
+{
+	struct vmap_area *tmp_va;
+
+	if (root) {
+		*link = &root->rb_node;
+		if (unlikely(!**link)) {
+			*parent = NULL;
+			return;
+		}
+	} else {
+		*link = &from;
+	}
 
-		parent = *p;
-		tmp_va = rb_entry(parent, struct vmap_area, rb_node);
+	do {
+		tmp_va = rb_entry(**link, struct vmap_area, rb_node);
 		if (va->va_start < tmp_va->va_end)
-			p = &(*p)->rb_left;
+			*link = &(**link)->rb_left;
 		else if (va->va_end > tmp_va->va_start)
-			p = &(*p)->rb_right;
+			*link = &(**link)->rb_right;
 		else
 			BUG();
+	} while (**link);
+
+	/*
+	 * Return back addresses of parent node of VA and
+	 * parent's left/right link for further inserting.
+	 */
+	*parent = &tmp_va->rb_node;
+}
+
+static inline void
+__find_va_free_siblings(struct rb_node *parent, struct rb_node **link,
+	struct list_head **prev, struct list_head **next)
+{
+	struct list_head *list;
+
+	if (likely(parent)) {
+		list = &rb_entry(parent, struct vmap_area, rb_node)->list;
+		if (&parent->rb_right == link) {
+			*next = list->next;
+			*prev = list;
+		} else {
+			*prev = list->prev;
+			*next = list;
+		}
+	} else {
+		/*
+		 * The red-black tree where we try to find VA neighbors
+		 * before merging or inserting is empty, i.e. it means
+		 * there is no free vmalloc space. Normally it does not
+		 * happen but we handle this case anyway.
+		 */
+		*next = *prev = &free_vmap_area_list;
+	}
+}
+
+static inline void
+__link_va(struct vmap_area *va, struct rb_root *root,
+	struct rb_node *parent, struct rb_node **link, struct list_head *head)
+{
+	/*
+	 * VA is still not in the list, but we can
+	 * identify its future previous list_head node.
+	 */
+	if (likely(parent)) {
+		head = &rb_entry(parent, struct vmap_area, rb_node)->list;
+		if (&parent->rb_right != link)
+			head = head->prev;
 	}
 
-	rb_link_node(&va->rb_node, parent, p);
-	rb_insert_color(&va->rb_node, &vmap_area_root);
+	/* Insert to the rb-tree */
+	rb_link_node(&va->rb_node, parent, link);
+	rb_insert_color(&va->rb_node, root);
 
-	/* address-sort this list */
-	tmp = rb_prev(&va->rb_node);
-	if (tmp) {
-		struct vmap_area *prev;
-		prev = rb_entry(tmp, struct vmap_area, rb_node);
-		list_add_rcu(&va->list, &prev->list);
-	} else
-		list_add_rcu(&va->list, &vmap_area_list);
+	/* Address-sort this list */
+	list_add(&va->list, head);
 }
 
-static void purge_vmap_area_lazy(void);
+static inline void
+__unlink_va(struct vmap_area *va, struct rb_root *root)
+{
+	/*
+	 * During merging a VA node can be empty, therefore
+	 * not linked with the tree nor list. Just check it.
+	 */
+	if (!RB_EMPTY_NODE(&va->rb_node)) {
+		rb_erase(&va->rb_node, root);
+		list_del(&va->list);
+	}
+}
 
-static BLOCKING_NOTIFIER_HEAD(vmap_notify_list);
+static void
+__insert_vmap_area(struct vmap_area *va,
+	struct rb_root *root, struct list_head *head)
+{
+	struct rb_node **link;
+	struct rb_node *parent;
+
+	__find_va_slot(va, root, NULL, &parent, &link);
+	__link_va(va, root, parent, link, head);
+}
+
+static inline void
+__remove_vmap_area(struct vmap_area *va, struct rb_root *root)
+{
+	__unlink_va(va, root);
+
+	/*
+	 * Fill the cache. If it is full, we just free VA.
+	 */
+	if (!__put_free_va_to_cache(va))
+		kfree(va);
+}
+
+/*
+ * Merge de-allocated chunk of VA memory with previous
+ * and next free blocks. Either a pointer to the new
+ * merged area is returned if coalesce is done or VA
+ * area if inserting is done.
+ */
+static inline struct vmap_area *
+__merge_add_free_va_area(struct vmap_area *va,
+	struct rb_root *root, struct list_head *head)
+{
+	struct vmap_area *sibling;
+	struct list_head *next, *prev;
+	struct rb_node **link;
+	struct rb_node *parent;
+	bool merged = false;
+
+	/*
+	 * To perform merging we have to restore an area which belongs
+	 * to this VA if the allocation has been done with specific align
+	 * value. In case of PCPU allocations nothing is changed.
+	 */
+	if (va->align <= VMALLOC_MAX_PADDING)
+		va->va_end = ALIGN(va->va_end, va->align);
+
+	/*
+	 * Find a place in the tree where VA potentially will be
+	 * inserted, unless it is merged with its sibling/siblings.
+	 */
+	__find_va_slot(va, root, NULL, &parent, &link);
+
+	/*
+	 * Get next/prev nodes of VA to check if merging can be done.
+	 */
+	__find_va_free_siblings(parent, link, &prev, &next);
+
+	/*
+	 * start            end
+	 * |                |
+	 * |<------VA------>|<-----Next----->|
+	 *                  |                |
+	 *                  start            end
+	 */
+	if (next != head) {
+		sibling = list_entry(next, struct vmap_area, list);
+		if (sibling->va_start == va->va_end) {
+			sibling->va_start = va->va_start;
+			__remove_vmap_area(va, root);
+
+			/* Point to the new merged area. */
+			va = sibling;
+			merged = true;
+		}
+	}
+
+	/*
+	 * start            end
+	 * |                |
+	 * |<-----Prev----->|<------VA------>|
+	 *                  |                |
+	 *                  start            end
+	 */
+	if (prev != head) {
+		sibling = list_entry(prev, struct vmap_area, list);
+		if (sibling->va_end == va->va_start) {
+			sibling->va_end = va->va_end;
+			__remove_vmap_area(va, root);
+
+			/* Point to the new merged area. */
+			va = sibling;
+			merged = true;
+		}
+	}
+
+	if (!merged)
+		__link_va(va, root, parent, link, head);
+
+	return va;
+}
+
+enum alloc_fit_type {
+	NOTHING_FIT = 0,
+	FL_FIT_TYPE = 1,	/* full fit */
+	LE_FIT_TYPE = 2,	/* left edge fit */
+	RE_FIT_TYPE = 3,	/* right edge fit */
+	NE_FIT_TYPE = 4		/* no edge fit */
+};
+
+static inline unsigned long
+alloc_vmalloc_area(struct vmap_area **fl_fit_va, unsigned long size,
+	unsigned long align, unsigned long vstart, unsigned long vend)
+{
+	unsigned long nva_start_addr;
+	struct vmap_area *va, *lva;
+	struct rb_node *parent;
+	struct rb_node **link;
+	u8 fit_type;
+
+	va = last_free_area;
+	fit_type = NOTHING_FIT;
+	*fl_fit_va = NULL;
+
+	/*
+	 * Use aligned size if the align value is within
+	 * allowed padding range. This is done to reduce
+	 * external fragmentation.
+	 */
+	if (align <= VMALLOC_MAX_PADDING)
+		size = ALIGN(size, align);
+
+	if (!last_free_area || size < free_va_max_size ||
+			vstart < last_alloc_vstart ||
+			align < last_alloc_align) {
+		va = list_first_entry_or_null(&free_vmap_area_list,
+				struct vmap_area, list);
+
+		if (unlikely(!va))
+			return vend;
+
+		free_va_max_size = 0;
+		last_free_area = NULL;
+	}
+
+	nva_start_addr = ALIGN(vstart, align);
+	list_for_each_entry_from(va, &free_vmap_area_list, list) {
+		if (va->va_start > vstart)
+			nva_start_addr = ALIGN(va->va_start, align);
+
+		/*
+		 * Sanity test for following scenarios:
+		 * - overflow, due to big size;
+		 * - vend restriction check;
+		 * - vstart check, due to big align.
+		 */
+		if (nva_start_addr + size < nva_start_addr ||
+				nva_start_addr + size > vend ||
+					nva_start_addr < vstart)
+			break;
+
+		/*
+		 * VA does not fit to requested parameters. In this case we
+		 * calculate max available aligned size if nva_start_addr is
+		 * within this VA.
+		 */
+		if (nva_start_addr + size > va->va_end) {
+			if (nva_start_addr < va->va_end)
+				free_va_max_size = max(free_va_max_size,
+						va->va_end - nva_start_addr);
+			continue;
+		}
+
+		/* Classify what we have found. */
+		if (va->va_start == nva_start_addr) {
+			if (va->va_end == nva_start_addr + size)
+				fit_type = FL_FIT_TYPE;
+			else
+				fit_type = LE_FIT_TYPE;
+		} else if (va->va_end == nva_start_addr + size) {
+			fit_type = RE_FIT_TYPE;
+		} else {
+			fit_type = NE_FIT_TYPE;
+		}
+
+		last_free_area = va;
+		last_alloc_vstart = vstart;
+		last_alloc_align = align;
+		break;
+	}
+
+	if (fit_type == FL_FIT_TYPE) {
+		/*
+		 * No need to split VA, it fully fits.
+		 *
+		 * |               |
+		 * V      NVA      V
+		 * |---------------|
+		 */
+		if (va->list.prev != &free_vmap_area_list)
+			last_free_area = list_prev_entry(va, list);
+		else
+			last_free_area = NULL;
+
+		__unlink_va(va, &free_vmap_area_root);
+		*fl_fit_va = va;
+	} else if (fit_type == LE_FIT_TYPE) {
+		/*
+		 * Split left edge fit VA.
+		 *
+		 * |       |
+		 * V  NVA  V   R
+		 * |-------|-------|
+		 */
+		va->va_start += size;
+	} else if (fit_type == RE_FIT_TYPE) {
+		/*
+		 * Split right edge fit VA.
+		 *
+		 *         |       |
+		 *     L   V  NVA  V
+		 * |-------|-------|
+		 */
+		va->va_end = nva_start_addr;
+	} else if (fit_type == NE_FIT_TYPE) {
+		/*
+		 * Split no edge fit VA.
+		 *
+		 *     |       |
+		 *   L V  NVA  V R
+		 * |---|-------|---|
+		 */
+		lva = __get_free_va_from_cache();
+		if (!lva) {
+			lva = kmalloc(sizeof(*lva), GFP_NOWAIT);
+			if (unlikely(!lva))
+				return vend;
+		}
+
+		/*
+		 * Build the remainder.
+		 */
+		lva->va_start = va->va_start;
+		lva->va_end = nva_start_addr;
+
+		/*
+		 * Shrink this VA to remaining size.
+		 */
+		va->va_start = nva_start_addr + size;
+
+		/*
+		 * Add the remainder to the address sorted free list/tree.
+		 */
+		__find_va_slot(lva, NULL, &va->rb_node, &parent, &link);
+		__link_va(lva, &free_vmap_area_root,
+			parent, link, &free_vmap_area_list);
+	} else {
+		/* Not found. */
+		nva_start_addr = vend;
+	}
+
+	return nva_start_addr;
+}
+
+static inline struct vmap_area *
+kmalloc_va_node_leak_scan(gfp_t mask, int node)
+{
+	struct vmap_area *va;
+
+	mask &= GFP_RECLAIM_MASK;
+
+	va = kmalloc_node(sizeof(*va), mask, node);
+	if (unlikely(!va))
+		return NULL;
+
+	/*
+	 * Only scan the relevant parts containing pointers
+	 * to other objects to avoid false negatives.
+	 */
+	kmemleak_scan_area(&va->rb_node, SIZE_MAX, mask);
+	return va;
+}
 
 /*
  * Allocate a region of KVA of the specified size and alignment, within the
@@ -404,11 +823,12 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
 				unsigned long vstart, unsigned long vend,
 				int node, gfp_t gfp_mask)
 {
-	struct vmap_area *va;
+	struct vmap_area *va = NULL;
 	struct rb_node *n;
 	unsigned long addr;
 	int purged = 0;
 	struct vmap_area *first;
+	bool is_vmalloc_alloc;
 
 	BUG_ON(!size);
 	BUG_ON(offset_in_page(size));
@@ -416,19 +836,38 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
 
 	might_sleep();
 
-	va = kmalloc_node(sizeof(struct vmap_area),
-			gfp_mask & GFP_RECLAIM_MASK, node);
-	if (unlikely(!va))
-		return ERR_PTR(-ENOMEM);
-
-	/*
-	 * Only scan the relevant parts containing pointers to other objects
-	 * to avoid false negatives.
-	 */
-	kmemleak_scan_area(&va->rb_node, SIZE_MAX, gfp_mask & GFP_RECLAIM_MASK);
+	is_vmalloc_alloc = is_vmalloc_addr((void *) vstart);
+	if (!is_vmalloc_alloc) {
+		va = kmalloc_va_node_leak_scan(gfp_mask, node);
+		if (unlikely(!va))
+			return ERR_PTR(-ENOMEM);
+	}
 
 retry:
 	spin_lock(&vmap_area_lock);
+	if (is_vmalloc_alloc) {
+		addr = alloc_vmalloc_area(&va, size, align, vstart, vend);
+
+		/*
+		 * If an allocation fails, the "vend" address is
+		 * returned. Therefore trigger an overflow path.
+		 */
+		if (unlikely(addr == vend))
+			goto overflow;
+
+		if (!va) {
+			spin_unlock(&vmap_area_lock);
+
+			va = kmalloc_va_node_leak_scan(gfp_mask, node);
+			if (unlikely(!va))
+				return ERR_PTR(-ENOMEM);
+
+			spin_lock(&vmap_area_lock);
+		}
+
+		goto insert_vmap_area;
+	}
+
 	/*
 	 * Invalidate cache if we have more permissive parameters.
 	 * cached_hole_size notes the largest hole noticed _below_
@@ -501,11 +940,15 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
 	if (addr + size > vend)
 		goto overflow;
 
+	free_vmap_cache = &va->rb_node;
+
+insert_vmap_area:
 	va->va_start = addr;
 	va->va_end = addr + size;
+	va->align = align;
 	va->flags = 0;
-	__insert_vmap_area(va);
-	free_vmap_cache = &va->rb_node;
+	__insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
+
 	spin_unlock(&vmap_area_lock);
 
 	BUG_ON(!IS_ALIGNED(va->va_start, align));
@@ -552,9 +995,13 @@ EXPORT_SYMBOL_GPL(unregister_vmap_purge_notifier);
 
 static void __free_vmap_area(struct vmap_area *va)
 {
+	unsigned long last_free_va_start;
+	bool is_vmalloc_area;
+
 	BUG_ON(RB_EMPTY_NODE(&va->rb_node));
+	is_vmalloc_area = is_vmalloc_addr((void *) va->va_start);
 
-	if (free_vmap_cache) {
+	if (!is_vmalloc_area && free_vmap_cache) {
 		if (va->va_end < cached_vstart) {
 			free_vmap_cache = NULL;
 		} else {
@@ -571,18 +1018,38 @@ static void __free_vmap_area(struct vmap_area *va)
 	}
 	rb_erase(&va->rb_node, &vmap_area_root);
 	RB_CLEAR_NODE(&va->rb_node);
-	list_del_rcu(&va->list);
+	list_del(&va->list);
 
-	/*
-	 * Track the highest possible candidate for pcpu area
-	 * allocation.  Areas outside of vmalloc area can be returned
-	 * here too, consider only end addresses which fall inside
-	 * vmalloc area proper.
-	 */
-	if (va->va_end > VMALLOC_START && va->va_end <= VMALLOC_END)
+	if (is_vmalloc_area) {
+		/*
+		 * Track the highest possible candidate for pcpu area
+		 * allocation.  Areas outside of vmalloc area can be returned
+		 * here too, consider only end addresses which fall inside
+		 * vmalloc area proper.
+		 */
 		vmap_area_pcpu_hole = max(vmap_area_pcpu_hole, va->va_end);
 
-	kfree_rcu(va, rcu_head);
+		if (last_free_area)
+			last_free_va_start = last_free_area->va_start;
+		else
+			last_free_va_start = 0;
+
+		/*
+		 * Merge VA with its neighbors, otherwise just add it.
+		 */
+		va = __merge_add_free_va_area(va,
+			&free_vmap_area_root, &free_vmap_area_list);
+
+		/*
+		 * Update a search criteria if merging/inserting is done
+		 * before the va_start address of last_free_area marker.
+		 */
+		if (last_free_area)
+			if (va->va_start < last_free_va_start)
+				last_free_area = va;
+	} else {
+		kfree(va);
+	}
 }
 
 /*
@@ -1238,6 +1705,51 @@ void __init vm_area_register_early(struct vm_struct *vm, size_t align)
 	vm_area_add_early(vm);
 }
 
+static void vmalloc_init_free_space(void)
+{
+	unsigned long free_hole_start = VMALLOC_START;
+	const unsigned long vmalloc_end = VMALLOC_END;
+	struct vmap_area *busy_area, *free_area;
+
+	/*
+	 *     B     F     B     B     B     F
+	 * -|-----|.....|-----|-----|-----|.....|-
+	 *  |           vmalloc space           |
+	 *  |<--------------------------------->|
+	 */
+	list_for_each_entry(busy_area, &vmap_area_list, list) {
+		if (!is_vmalloc_addr((void *) busy_area->va_start))
+			continue;
+
+		if (busy_area->va_start - free_hole_start > 0) {
+			free_area = kzalloc(sizeof(*free_area), GFP_NOWAIT);
+			free_area->va_start = free_hole_start;
+			free_area->va_end = busy_area->va_start;
+
+			__insert_vmap_area(free_area,
+				&free_vmap_area_root, &free_vmap_area_list);
+		}
+
+		free_hole_start = busy_area->va_end;
+	}
+
+	if (vmalloc_end - free_hole_start > 0) {
+		free_area = kzalloc(sizeof(*free_area), GFP_NOWAIT);
+		free_area->va_start = free_hole_start;
+		free_area->va_end = vmalloc_end;
+
+		__insert_vmap_area(free_area,
+			&free_vmap_area_root, &free_vmap_area_list);
+	}
+
+	/*
+	 * Assume if busy VA overlaps two areas it is wrong.
+	 * I.e. a start address is vmalloc address whereas an
+	 * end address is not. Warn if so.
+	 */
+	WARN_ON(free_hole_start > vmalloc_end);
+}
+
 void __init vmalloc_init(void)
 {
 	struct vmap_area *va;
@@ -1263,9 +1775,14 @@ void __init vmalloc_init(void)
 		va->va_start = (unsigned long)tmp->addr;
 		va->va_end = va->va_start + tmp->size;
 		va->vm = tmp;
-		__insert_vmap_area(va);
+		__insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
 	}
 
+	/*
+	 * Now we can initialize a free vmalloc space.
+	 */
+	vmalloc_init_free_space();
+
 	vmap_area_pcpu_hole = VMALLOC_END;
 
 	vmap_initialized = true;
@@ -2365,82 +2882,23 @@ static struct vmap_area *node_to_va(struct rb_node *n)
 	return rb_entry_safe(n, struct vmap_area, rb_node);
 }
 
-/**
- * pvm_find_next_prev - find the next and prev vmap_area surrounding @end
- * @end: target address
- * @pnext: out arg for the next vmap_area
- * @pprev: out arg for the previous vmap_area
- *
- * Returns: %true if either or both of next and prev are found,
- *	    %false if no vmap_area exists
- *
- * Find vmap_areas end addresses of which enclose @end.  ie. if not
- * NULL, *pnext->va_end > @end and *pprev->va_end <= @end.
- */
-static bool pvm_find_next_prev(unsigned long end,
-			       struct vmap_area **pnext,
-			       struct vmap_area **pprev)
+static struct vmap_area *
+addr_to_free_va(unsigned long addr)
 {
-	struct rb_node *n = vmap_area_root.rb_node;
+	struct rb_node *n = free_vmap_area_root.rb_node;
 	struct vmap_area *va = NULL;
 
 	while (n) {
 		va = rb_entry(n, struct vmap_area, rb_node);
-		if (end < va->va_end)
+		if (addr < va->va_start)
 			n = n->rb_left;
-		else if (end > va->va_end)
+		else if (addr > va->va_end)
 			n = n->rb_right;
 		else
-			break;
-	}
-
-	if (!va)
-		return false;
-
-	if (va->va_end > end) {
-		*pnext = va;
-		*pprev = node_to_va(rb_prev(&(*pnext)->rb_node));
-	} else {
-		*pprev = va;
-		*pnext = node_to_va(rb_next(&(*pprev)->rb_node));
-	}
-	return true;
-}
-
-/**
- * pvm_determine_end - find the highest aligned address between two vmap_areas
- * @pnext: in/out arg for the next vmap_area
- * @pprev: in/out arg for the previous vmap_area
- * @align: alignment
- *
- * Returns: determined end address
- *
- * Find the highest aligned address between *@pnext and *@pprev below
- * VMALLOC_END.  *@pnext and *@pprev are adjusted so that the aligned
- * down address is between the end addresses of the two vmap_areas.
- *
- * Please note that the address returned by this function may fall
- * inside *@pnext vmap_area.  The caller is responsible for checking
- * that.
- */
-static unsigned long pvm_determine_end(struct vmap_area **pnext,
-				       struct vmap_area **pprev,
-				       unsigned long align)
-{
-	const unsigned long vmalloc_end = VMALLOC_END & ~(align - 1);
-	unsigned long addr;
-
-	if (*pnext)
-		addr = min((*pnext)->va_start & ~(align - 1), vmalloc_end);
-	else
-		addr = vmalloc_end;
-
-	while (*pprev && (*pprev)->va_end > addr) {
-		*pnext = *pprev;
-		*pprev = node_to_va(rb_prev(&(*pnext)->rb_node));
+			return va;
 	}
 
-	return addr;
+	return NULL;
 }
 
 /**
@@ -2473,11 +2931,14 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets,
 {
 	const unsigned long vmalloc_start = ALIGN(VMALLOC_START, align);
 	const unsigned long vmalloc_end = VMALLOC_END & ~(align - 1);
-	struct vmap_area **vas, *prev, *next;
+	struct vmap_area **vas, *va;
+	struct vmap_area **off = NULL;
 	struct vm_struct **vms;
-	int area, area2, last_area, term_area;
-	unsigned long base, start, end, last_end;
+	int area, area2, last_area;
+	unsigned long start, end, last_end;
+	unsigned long base;
 	bool purged = false;
+	u8 fit_type = NOTHING_FIT;
 
 	/* verify parameters and allocate data structures */
 	BUG_ON(offset_in_page(align) || !is_power_of_2(align));
@@ -2512,90 +2973,122 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets,
 	if (!vas || !vms)
 		goto err_free2;
 
+	if (nr_vms > 1) {
+		off = kcalloc(nr_vms, sizeof(off[0]), GFP_KERNEL);
+		if (!off)
+			goto err_free2;
+	}
+
 	for (area = 0; area < nr_vms; area++) {
 		vas[area] = kzalloc(sizeof(struct vmap_area), GFP_KERNEL);
 		vms[area] = kzalloc(sizeof(struct vm_struct), GFP_KERNEL);
 		if (!vas[area] || !vms[area])
 			goto err_free;
+
+		if (nr_vms > 1) {
+			off[area] = kzalloc(sizeof(off[0]), GFP_KERNEL);
+			if (!off[area])
+				goto err_free;
+		}
 	}
+
 retry:
 	spin_lock(&vmap_area_lock);
 
-	/* start scanning - we scan from the top, begin with the last area */
-	area = term_area = last_area;
-	start = offsets[area];
-	end = start + sizes[area];
+	/*
+	 * Initialize va here, since we can retry the search.
+	 */
+	va = NULL;
 
-	if (!pvm_find_next_prev(vmap_area_pcpu_hole, &next, &prev)) {
-		base = vmalloc_end - last_end;
-		goto found;
+	if (unlikely(list_empty(&free_vmap_area_list))) {
+		spin_unlock(&vmap_area_lock);
+		goto err_free;
 	}
-	base = pvm_determine_end(&next, &prev, align) - end;
 
-	while (true) {
-		BUG_ON(next && next->va_end <= base + end);
-		BUG_ON(prev && prev->va_end > base + end);
+	if (off)
+		va = addr_to_free_va(vmap_area_pcpu_hole);
+
+	if (!va)
+		va = list_last_entry(&free_vmap_area_list,
+				struct vmap_area, list);
+
+	list_for_each_entry_from_reverse(va, &free_vmap_area_list, list) {
+		base = (va->va_end & ~(align - 1)) - last_end;
 
 		/*
 		 * base might have underflowed, add last_end before
 		 * comparing.
 		 */
-		if (base + last_end < vmalloc_start + last_end) {
-			spin_unlock(&vmap_area_lock);
-			if (!purged) {
-				purge_vmap_area_lazy();
-				purged = true;
-				goto retry;
-			}
-			goto err_free;
-		}
+		if (base + last_end < vmalloc_start + last_end)
+			break;
 
-		/*
-		 * If next overlaps, move base downwards so that it's
-		 * right below next and then recheck.
-		 */
-		if (next && next->va_start < base + end) {
-			base = pvm_determine_end(&next, &prev, align) - end;
-			term_area = area;
+		if (base < va->va_start)
 			continue;
-		}
 
+		if (base > va->va_start)
+			fit_type = RE_FIT_TYPE;
+		else
+			/* base == va->va_start */
+			fit_type = FL_FIT_TYPE;
+
+		break;
+	}
+
+	if (fit_type == RE_FIT_TYPE) {
+		va->va_end = base;
+	} else if (fit_type == FL_FIT_TYPE) {
 		/*
-		 * If prev overlaps, shift down next and prev and move
-		 * base so that it's right below new next and then
-		 * recheck.
+		 * Check if there is an interaction with regular
+		 * vmalloc allocations when a free block fully fits.
+		 * If so just shift back last_free_area marker.
 		 */
-		if (prev && prev->va_end > base + start)  {
-			next = prev;
-			prev = node_to_va(rb_prev(&next->rb_node));
-			base = pvm_determine_end(&next, &prev, align) - end;
-			term_area = area;
-			continue;
+		if (last_free_area == va)
+			last_free_area = node_to_va(rb_prev(&va->rb_node));
+
+		__remove_vmap_area(va, &free_vmap_area_root);
+	} else {
+		spin_unlock(&vmap_area_lock);
+		if (!purged) {
+			purge_vmap_area_lazy();
+			purged = true;
+			goto retry;
 		}
 
-		/*
-		 * This area fits, move on to the previous one.  If
-		 * the previous one is the terminal one, we're done.
-		 */
-		area = (area + nr_vms - 1) % nr_vms;
-		if (area == term_area)
-			break;
-		start = offsets[area];
-		end = start + sizes[area];
-		pvm_find_next_prev(base + end, &next, &prev);
+		goto err_free;
 	}
-found:
-	/* we've found a fitting base, insert all va's */
-	for (area = 0; area < nr_vms; area++) {
-		struct vmap_area *va = vas[area];
 
+	/* we've found a fitting base, insert all va's */
+	for (area = 0, start = base; area < nr_vms; area++) {
+		va = vas[area];
 		va->va_start = base + offsets[area];
 		va->va_end = va->va_start + sizes[area];
-		__insert_vmap_area(va);
-	}
 
-	vmap_area_pcpu_hole = base + offsets[last_area];
+		/*
+		 * If there are several areas to allocate, we should insert
+		 * back a free space that is organized by area size and offset.
+		 */
+		if (off) {
+			off[area]->va_start = start;
+			off[area]->va_end = start + offsets[area];
 
+			/* Shift to next free start. */
+			start = va->va_end;
+
+			/*
+			 * Some initialization before adding/merging.
+			 */
+			RB_CLEAR_NODE(&off[area]->rb_node);
+			off[area]->align = 1;
+
+			(void) __merge_add_free_va_area(off[area],
+				&free_vmap_area_root, &free_vmap_area_list);
+		}
+
+		__insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
+		va->align = 1;
+	}
+
+	vmap_area_pcpu_hole = base;
 	spin_unlock(&vmap_area_lock);
 
 	/* insert all vm's */
@@ -2604,16 +3097,21 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets,
 				 pcpu_get_vm_areas);
 
 	kfree(vas);
+	kfree(off);
 	return vms;
 
 err_free:
 	for (area = 0; area < nr_vms; area++) {
+		if (nr_vms > 1)
+			kfree(off[area]);
+
 		kfree(vas[area]);
 		kfree(vms[area]);
 	}
 err_free2:
 	kfree(vas);
 	kfree(vms);
+	kfree(off);
 	return NULL;
 }
 
-- 
2.11.0

[LKP] [mm/vmalloc] 8dab1f5c1e: BUG:soft_lockup-CPU##stuck_for#s

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 6549 bytes --]

FYI, we noticed the following commit (built with gcc-7):

commit: 8dab1f5c1e6a0b2cb17237035efaf019553d79ea ("[RFC PATCH 1/2] mm/vmalloc: keep track of free blocks for allocation")
url: https://github.com/0day-ci/linux/commits/Uladzislau-Rezki-Sony/improve-vmalloc-allocation/20181021-001707
base: https://github.com/thesofproject/linux master

in testcase: ftq
with following parameters:

	nr_task: 100%
	samples: 100000ss
	test: add
	freq: 1000
	ucode: 0xb00002e
	cpufreq_governor: performance

test-description: The FTQ benchmarks measure hardware and software interference or 'noise' on a node from the applications perspective.
test-url: https://github.com/rminnich/ftq


on test machine: 192 threads Intel(R) Xeon(R) CPU E7-8890 v4 @ 2.20GHz with 512G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+-----------------------------------------------------------------+------------+------------+
|                                                                 | dd52cb8790 | 8dab1f5c1e |
+-----------------------------------------------------------------+------------+------------+
| boot_successes                                                  | 36         | 0          |
| boot_failures                                                   | 11         | 12         |
| WARNING:stack_recursion                                         | 11         |            |
| WARNING:at#for_ip_swapgs_restore_regs_and_return_to_usermode/0x | 10         |            |
| WARNING:stack_going_in_the_wrong_direction?ip=_cond_resched/0x  | 1          |            |
| WARNING:stack_going_in_the_wrong_direction?ip=__schedule/0x     | 1          |            |
| BUG:soft_lockup-CPU##stuck_for#s                                | 0          | 11         |
| RIP:pcpu_get_vm_areas                                           | 0          | 12         |
| Kernel_panic-not_syncing:softlockup:hung_tasks                  | 0          | 11         |
| kernel_BUG_at_mm/vmalloc.c                                      | 0          | 1          |
| invalid_opcode:#[##]                                            | 0          | 1          |
| Kernel_panic-not_syncing:Fatal_exception                        | 0          | 1          |
+-----------------------------------------------------------------+------------+------------+



[   37.496001] watchdog: BUG: soft lockup - CPU#97 stuck for 22s! [kworker/97:1:825]
[   37.496001] Modules linked in:
[   37.496001] CPU: 97 PID: 825 Comm: kworker/97:1 Not tainted 4.17.0-rc7-00044-g8dab1f5 #1
[   37.496001] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRBDXSD1.86B.0338.R00.1603162127 03/16/2016
[   37.496001] Workqueue: events pcpu_balance_workfn
[   37.496001] RIP: 0010:pcpu_get_vm_areas+0x464/0xa90
[   37.496001] RSP: 0000:ffffc9000e57bd50 EFLAGS: 00000296 ORIG_RAX: ffffffffffffff13
[   37.496001] RAX: ffff885bf9eaa078 RBX: ffff885bf9eaa048 RCX: ffff885bf9eaa078
[   37.496001] RDX: ffff885bf9eaa088 RSI: ffffe8c00d000000 RDI: 0000000000000000
[   37.496001] RBP: ffffe8e00d000000 R08: ffffffff82516cd0 R09: ffff883bf9b19260
[   37.496001] R10: ffff881c0ec03038 R11: ffff881c0ec03028 R12: ffff885bf9a8b1c0
[   37.496001] R13: ffff885bf9b9fea0 R14: 0000000000000010 R15: ffff885bf9a8b1a0
[   37.496001] FS:  0000000000000000(0000) GS:ffff881c0f840000(0000) knlGS:0000000000000000
[   37.496001] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   37.496001] CR2: 0000000000000000 CR3: 000000000240a001 CR4: 00000000003606e0
[   37.496001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   37.496001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   37.496001] Call Trace:
[   37.496001]  ? __kmalloc+0x1ee/0x230
[   37.496001]  pcpu_create_chunk+0x10a/0x1b0
[   37.496001]  pcpu_balance_workfn+0x27a/0x620
[   37.496001]  ? pick_next_task_fair+0x134/0x600
[   37.496001]  ? __switch_to+0x92/0x4d0
[   37.496001]  ? put_prev_entity+0x20/0x100
[   37.496001]  process_one_work+0x182/0x3a0
[   37.496001]  worker_thread+0x3a/0x3b0
[   37.496001]  ? process_one_work+0x3a0/0x3a0
[   37.496001]  kthread+0x11e/0x140
[   37.496001]  ? kthread_associate_blkcg+0xb0/0xb0
[   37.496001]  ret_from_fork+0x35/0x40
[   37.496001] Code: ea 01 48 21 d0 48 89 43 08 48 8b 05 7f e0 c7 01 48 85 c0 0f 84 bd 03 00 00 48 8b 33 eb 03 48 89 c8 48 3b 70 e8 48 8d 50 10 72 12 <48> 8b 78 e0 48 39 7b 08 0f 86 91 05 00 00 48 8d 50 08 48 8b 0a 
[   37.496001] Kernel panic - not syncing: softlockup: hung tasks
[   37.496001] CPU: 97 PID: 825 Comm: kworker/97:1 Tainted: G             L    4.17.0-rc7-00044-g8dab1f5 #1
[   37.496001] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRBDXSD1.86B.0338.R00.1603162127 03/16/2016
[   37.496001] Workqueue: events pcpu_balance_workfn
[   37.496001] Call Trace:
[   37.496001]  <IRQ>
[   37.496001]  dump_stack+0x5c/0x7b
[   37.496001]  panic+0xd5/0x242
[   37.496001]  watchdog_timer_fn+0x20f/0x220
[   37.496001]  ? watchdog+0x30/0x30
[   37.496001]  __hrtimer_run_queues+0xfa/0x290
[   37.496001]  hrtimer_interrupt+0xe5/0x240
[   37.496001]  smp_apic_timer_interrupt+0x62/0x140
[   37.496001]  apic_timer_interrupt+0xf/0x20
[   37.496001]  </IRQ>
[   37.496001] RIP: 0010:pcpu_get_vm_areas+0x464/0xa90
[   37.496001] RSP: 0000:ffffc9000e57bd50 EFLAGS: 00000296 ORIG_RAX: ffffffffffffff13
[   37.496001] RAX: ffff885bf9eaa078 RBX: ffff885bf9eaa048 RCX: ffff885bf9eaa078
[   37.496001] RDX: ffff885bf9eaa088 RSI: ffffe8c00d000000 RDI: 0000000000000000
[   37.496001] RBP: ffffe8e00d000000 R08: ffffffff82516cd0 R09: ffff883bf9b19260
[   37.496001] R10: ffff881c0ec03038 R11: ffff881c0ec03028 R12: ffff885bf9a8b1c0
[   37.496001] R13: ffff885bf9b9fea0 R14: 0000000000000010 R15: ffff885bf9a8b1a0
[   37.496001]  ? __kmalloc+0x1ee/0x230
[   37.496001]  pcpu_create_chunk+0x10a/0x1b0
[   37.496001]  pcpu_balance_workfn+0x27a/0x620
[   37.496001]  ? pick_next_task_fair+0x134/0x600
[   37.496001]  ? __switch_to+0x92/0x4d0
[   37.496001]  ? put_prev_entity+0x20/0x100
[   37.496001]  process_one_work+0x182/0x3a0
[   37.496001]  worker_thread+0x3a/0x3b0
[   37.496001]  ? process_one_work+0x3a0/0x3a0
[   37.496001]  kthread+0x11e/0x140
[   37.496001]  ? kthread_associate_blkcg+0xb0/0xb0
[   37.496001]  ret_from_fork+0x35/0x40
ACPI MEMORY or I/O RESET_REG.


To reproduce:

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Rong Chen

[-- Attachment #2: config-4.17.0-rc7-00044-g8dab1f5 --]
[-- Type: text/plain, Size: 164409 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.17.0-rc7 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_NOCB_CPU=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
# CONFIG_CC_STACKPROTECTOR_AUTO is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_INTEL_RDT=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_ZONE_DEVICE=y
CONFIG_ARCH_HAS_HMM=y
# CONFIG_HMM_MIRROR is not set
# CONFIG_DEVICE_PRIVATE is not set
# CONFIG_DEVICE_PUBLIC is not set
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_UMIP=y
CONFIG_X86_INTEL_MPX=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Cadence PCIe controllers support
#

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#
# CONFIG_VMD is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_RT is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
# CONFIG_NFT_SET_BITMAP is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
# CONFIG_NF_TABLES_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
# CONFIG_HYPERV_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_LEDS is not set
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set

#
# CAN USB interfaces
#
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# Partition parsers
#

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_NAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_BLK_DEV_FD=m
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_FABRICS=m
# CONFIG_NVME_FC is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
# CONFIG_NVME_TARGET_FC is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
# CONFIG_DM_INTEGRITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
CONFIG_NET_VRF=y
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x2E is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PEARL_PCIE is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_NETDEVSIM=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PROC_INTERFACE=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=m
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VX855 is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS68470 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
# CONFIG_IR_IMON_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_DVB_CORE=m
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#

#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m

#
# Tools to develop new frontends
#

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#

#
# AMD Library routines
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
CONFIG_DRM_VGEM=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
# CONFIG_HDMI_LPE_AUDIO is not set
CONFIG_SND_SYNTH_EMUX=m
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GOOGLE_HAMMER is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_GHES is not set
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TSCPAGE=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_PVCALLS_FRONTEND is not set
# CONFIG_XEN_PVCALLS_BACKEND is not set
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_IPX is not set
# CONFIG_NCP_FS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_R8822BE is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_PI433 is not set
# CONFIG_MTK_MMC is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_SURFACE3_WMI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_INTEL_WMI_THUNDERBOLT is not set
CONFIG_MSI_WMI=m
# CONFIG_PEAQ_WMI is not set
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_NVMEM=y

#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
# CONFIG_INTEL_TH_ACPI is not set
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# CONFIG_FPGA is not set
CONFIG_PM_OPP=y
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
CONFIG_UEFI_CPER=y

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FS_ENCRYPTION=y
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=m
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_MMC_REQUEST is not set
# CONFIG_FAIL_FUTEX is not set
# CONFIG_FAIL_FUNCTION is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
# CONFIG_FIND_BIT_BENCHMARK is not set
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA1_MB=m
CONFIG_CRYPTO_SHA256_MB=m
CONFIG_CRYPTO_SHA512_MB=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_SPECK is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=m
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_SGL_ALLOC=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 4496 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='ftq'
	export testcase='ftq'
	export category='noise-benchmark'
	export nr_task=192
	export samples='100000ss'
	export job_origin='/lkp/lkp/.src-20181026-121544/allot/cyclic:default:linux-devel:devel-hourly/lkp-bdw-ex1/ftq.yaml'
	export queue='validate'
	export testbox='lkp-bdw-ex1'
	export tbox_group='lkp-bdw-ex1'
	export submit_id='5bd5a0fb0b9a9331294c68f2'
	export job_file='/lkp/jobs/scheduled/lkp-bdw-ex1/ftq-100%-100000ss-add-1000-ucode=0xb00002e-performance-debian-x86_64-2018-04-03.cgz-8dab1f5c1e6a0b2cb17237035efaf019553d79ea-20181028-78121-19na4op-8.yaml'
	export id='bea1dbc7110a966efff2f2f3b54839090bb88889'
	export model='Broadwell-EX'
	export nr_node=4
	export nr_cpu=192
	export memory='512G'
	export swap_partitions=
	export rootfs_partition=
	export brand='Intel(R) Xeon(R) CPU E7-8890 v4 @ 2.20GHz'
	export ucode='0xb00002e'
	export commit='8dab1f5c1e6a0b2cb17237035efaf019553d79ea'
	export kconfig='x86_64-rhel-7.2'
	export compiler='gcc-7'
	export rootfs='debian-x86_64-2018-04-03.cgz'
	export enqueue_time='2018-10-28 19:43:56 +0800'
	export _id='5bd5a0fc0b9a9331294c68f9'
	export _rt='/result/ftq/100%-100000ss-add-1000-ucode=0xb00002e-performance/lkp-bdw-ex1/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea'
	export user='lkp'
	export head_commit='16aa49806a18f7a3b7944e20b51c135b307168c8'
	export base_commit='84df9525b0c27f3ebc2ebb1864fa62a97fdedb7d'
	export branch='linux-devel/devel-hourly-2018102705'
	export result_root='/result/ftq/100%-100000ss-add-1000-ucode=0xb00002e-performance/lkp-bdw-ex1/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/8'
	export LKP_SERVER='inn'
	export max_uptime=3600
	export initrd='/osimage/debian/debian-x86_64-2018-04-03.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/jobs/scheduled/lkp-bdw-ex1/ftq-100%-100000ss-add-1000-ucode=0xb00002e-performance-debian-x86_64-2018-04-03.cgz-8dab1f5c1e6a0b2cb17237035efaf019553d79ea-20181028-78121-19na4op-8.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.2
branch=linux-devel/devel-hourly-2018102705
commit=8dab1f5c1e6a0b2cb17237035efaf019553d79ea
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/vmlinuz-4.17.0-rc7-00044-g8dab1f5
max_uptime=3600
RESULT_ROOT=/result/ftq/100%-100000ss-add-1000-ucode=0xb00002e-performance/lkp-bdw-ex1/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/8
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2018-04-03.cgz/run-ipconfig_2018-04-03.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/lkp_2018-04-03.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/rsync-rootfs_2018-04-03.cgz,/osimage/pkg/debian-x86_64-2018-04-03.cgz/ftq-x86_64-0833481_2018-05-18.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/hw+lkp-run-on-qemu.cgz'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export repeat_to=12
	export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/vmlinuz-4.17.0-rc7-00044-g8dab1f5'
	export dequeue_time='2018-10-29 02:17:56 +0800'
	export job_initrd='/lkp/jobs/scheduled/lkp-bdw-ex1/ftq-100%-100000ss-add-1000-ucode=0xb00002e-performance-debian-x86_64-2018-04-03.cgz-8dab1f5c1e6a0b2cb17237035efaf019553d79ea-20181028-78121-19na4op-8.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test test='add' freq=1000 $LKP_SRC/tests/wrapper ftq
}

extract_stats()
{
	$LKP_SRC/stats/wrapper ftq

	$LKP_SRC/stats/wrapper time ftq.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 13392 bytes --]

[-- Attachment #5: job.yaml --]
[-- Type: text/plain, Size: 3649 bytes --]

---

#! jobs/ftq.yaml
suite: ftq
testcase: ftq
category: noise-benchmark
nr_task: 100%
samples: 100000ss
ftq:
  test: add
  freq: 1000
job_origin: "/lkp/lkp/.src-20181026-121544/allot/cyclic:default:linux-devel:devel-hourly/lkp-bdw-ex1/ftq.yaml"

#! queue options
queue: bisect
testbox: lkp-bdw-ex1
tbox_group: lkp-bdw-ex1
submit_id: 5bd58d470b9a9371c5e81104
job_file: "/lkp/jobs/scheduled/lkp-bdw-ex1/ftq-100%-100000ss-add-1000-ucode=0xb00002e-performance-debian-x86_64-2018-04-03.cgz-8dab1f5c1e6a0b2cb17237035efaf019553d79ea-20181028-29125-15vk77o-0.yaml"
id: 5d6f4570ff6b1429435522550844103a4d28582d

#! hosts/lkp-bdw-ex1
model: Broadwell-EX
nr_node: 4
nr_cpu: 192
memory: 512G
swap_partitions: 
rootfs_partition: 
brand: Intel(R) Xeon(R) CPU E7-8890 v4 @ 2.20GHz
ucode: '0xb00002e'

#! include/category/ALL
cpufreq_governor: performance

#! include/queue/cyclic
commit: 8dab1f5c1e6a0b2cb17237035efaf019553d79ea

#! default params
kconfig: x86_64-rhel-7.2
compiler: gcc-7
rootfs: debian-x86_64-2018-04-03.cgz
enqueue_time: 2018-10-28 18:19:51.448948280 +08:00
_id: 5bd58d470b9a9371c5e81104
_rt: "/result/ftq/100%-100000ss-add-1000-ucode=0xb00002e-performance/lkp-bdw-ex1/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea"

#! schedule options
user: lkp
head_commit: 16aa49806a18f7a3b7944e20b51c135b307168c8
base_commit: 84df9525b0c27f3ebc2ebb1864fa62a97fdedb7d
branch: linux-devel/devel-hourly-2018102705
result_root: "/result/ftq/100%-100000ss-add-1000-ucode=0xb00002e-performance/lkp-bdw-ex1/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/0"
LKP_SERVER: inn
max_uptime: 3600
initrd: "/osimage/debian/debian-x86_64-2018-04-03.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/jobs/scheduled/lkp-bdw-ex1/ftq-100%-100000ss-add-1000-ucode=0xb00002e-performance-debian-x86_64-2018-04-03.cgz-8dab1f5c1e6a0b2cb17237035efaf019553d79ea-20181028-29125-15vk77o-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-7.2
- branch=linux-devel/devel-hourly-2018102705
- commit=8dab1f5c1e6a0b2cb17237035efaf019553d79ea
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/vmlinuz-4.17.0-rc7-00044-g8dab1f5
- max_uptime=3600
- RESULT_ROOT=/result/ftq/100%-100000ss-add-1000-ucode=0xb00002e-performance/lkp-bdw-ex1/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/0
- LKP_SERVER=inn
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- console=tty0
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- vga=normal
- rw
modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/modules.cgz"
bm_initrd: "/osimage/deps/debian-x86_64-2018-04-03.cgz/run-ipconfig_2018-04-03.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/lkp_2018-04-03.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/rsync-rootfs_2018-04-03.cgz,/osimage/pkg/debian-x86_64-2018-04-03.cgz/ftq-x86_64-0833481_2018-05-18.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/hw+lkp-run-on-qemu.cgz"
lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz"
site: inn

#! /lkp/lkp/.src-20181026-121544/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 

#! runtime status

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-7/8dab1f5c1e6a0b2cb17237035efaf019553d79ea/vmlinuz-4.17.0-rc7-00044-g8dab1f5"
dequeue_time: 2018-10-28 19:19:36.219270348 +08:00
job_state: booting

[RFC PATCH 2/2] mm: add priority threshold to __purge_vmap_area_lazy()

[Uladzislau Rezki (Sony)]

commit 763b218ddfaf ("mm: add preempt points into
__purge_vmap_area_lazy()")

introduced some preempt points, one of those is making
an allocation more prioritized.

Prioritizing an allocation over freeing does not work
well all the time, i.e. it should be rather a compromise.

1) Number of lazy pages directly influence on busy list
length thus on operations like: allocation, lookup, unmap,
remove, etc.

2) Under heavy simultaneous allocations/releases there may
be a situation when memory usage grows too fast hitting
out_of_memory -> panic.

Establish a threshold passing which the freeing path is
prioritized over allocation creating a balance between both.

Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 mm/vmalloc.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index a7f257540a05..bbafcff6632b 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1124,23 +1124,23 @@ static bool __purge_vmap_area_lazy(unsigned long start, unsigned long end)
 	struct llist_node *valist;
 	struct vmap_area *va;
 	struct vmap_area *n_va;
-	bool do_free = false;
+	int resched_threshold;
 
 	lockdep_assert_held(&vmap_purge_lock);
 
 	valist = llist_del_all(&vmap_purge_list);
+	if (unlikely(valist == NULL))
+		return false;
+
 	llist_for_each_entry(va, valist, purge_list) {
 		if (va->va_start < start)
 			start = va->va_start;
 		if (va->va_end > end)
 			end = va->va_end;
-		do_free = true;
 	}
 
-	if (!do_free)
-		return false;
-
 	flush_tlb_kernel_range(start, end);
+	resched_threshold = (int) lazy_max_pages() << 1;
 
 	spin_lock(&vmap_area_lock);
 	llist_for_each_entry_safe(va, n_va, valist, purge_list) {
@@ -1148,7 +1148,9 @@ static bool __purge_vmap_area_lazy(unsigned long start, unsigned long end)
 
 		__free_vmap_area(va);
 		atomic_sub(nr, &vmap_lazy_nr);
-		cond_resched_lock(&vmap_area_lock);
+
+		if (atomic_read(&vmap_lazy_nr) < resched_threshold)
+			cond_resched_lock(&vmap_area_lock);
 	}
 	spin_unlock(&vmap_area_lock);
 	return true;
-- 
2.11.0

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Roman Gushchin]

On Fri, Oct 19, 2018 at 07:35:36PM +0200, Uladzislau Rezki (Sony) wrote:
> Objective
> ---------
> Initiative of improving vmalloc allocator comes from getting many issues
> related to allocation time, i.e. sometimes it is terribly slow. As a result
> many workloads which are sensitive for long (more than 1 millisecond) preemption
> off scenario are affected by that slowness(test cases like UI or audio, etc.).
> 
> The problem is that, currently an allocation of the new VA area is done over
> busy list iteration until a suitable hole is found between two busy areas.
> Therefore each new allocation causes the list being grown. Due to long list
> and different permissive parameters an allocation can take a long time on
> embedded devices(milliseconds).
...
> 3) This one is related to PCPU allocator(see pcpu_alloc_test()). In that
> stress test case i see that SUnreclaim(/proc/meminfo) parameter gets increased,
> i.e. there is a memory leek somewhere in percpu allocator. It sounds like
> a memory that is allocated by pcpu_get_vm_areas() sometimes is not freed.
> Resulting in memory leaking or "Kernel panic":
> 

Can you, please, try the following patch:
6685b357363b ("percpu: stop leaking bitmap metadata blocks") ?

BTW, with growing number of vmalloc users (per-cpu allocator and bpf stuff are
big drivers), I find the patchset very interesting.

Thanks!

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki]

On Fri, Oct 19, 2018 at 10:44:39PM +0000, Roman Gushchin wrote:
> On Fri, Oct 19, 2018 at 07:35:36PM +0200, Uladzislau Rezki (Sony) wrote:
> > Objective
> > ---------
> > Initiative of improving vmalloc allocator comes from getting many issues
> > related to allocation time, i.e. sometimes it is terribly slow. As a result
> > many workloads which are sensitive for long (more than 1 millisecond) preemption
> > off scenario are affected by that slowness(test cases like UI or audio, etc.).
> > 
> > The problem is that, currently an allocation of the new VA area is done over
> > busy list iteration until a suitable hole is found between two busy areas.
> > Therefore each new allocation causes the list being grown. Due to long list
> > and different permissive parameters an allocation can take a long time on
> > embedded devices(milliseconds).
> ...
> > 3) This one is related to PCPU allocator(see pcpu_alloc_test()). In that
> > stress test case i see that SUnreclaim(/proc/meminfo) parameter gets increased,
> > i.e. there is a memory leek somewhere in percpu allocator. It sounds like
> > a memory that is allocated by pcpu_get_vm_areas() sometimes is not freed.
> > Resulting in memory leaking or "Kernel panic":
> > 
> 
> Can you, please, try the following patch:
> 6685b357363b ("percpu: stop leaking bitmap metadata blocks") ?
>
I have tested that patch. It fixes the leak for sure. Thank you for a
good point.

> 
> BTW, with growing number of vmalloc users (per-cpu allocator and bpf stuff are
> big drivers), I find the patchset very interesting.
> 
> Thanks!
Thank you!

--
Vlad Rezki

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Joel Fernandes]

On Fri, Oct 19, 2018 at 07:35:36PM +0200, Uladzislau Rezki (Sony) wrote:
> Objective
> ---------
> Initiative of improving vmalloc allocator comes from getting many issues
> related to allocation time, i.e. sometimes it is terribly slow. As a result
> many workloads which are sensitive for long (more than 1 millisecond) preemption
> off scenario are affected by that slowness(test cases like UI or audio, etc.).
> 
> The problem is that, currently an allocation of the new VA area is done over
> busy list iteration until a suitable hole is found between two busy areas.
> Therefore each new allocation causes the list being grown. Due to long list
> and different permissive parameters an allocation can take a long time on
> embedded devices(milliseconds).

I am not super familiar with the vmap allocation code, it has been some
years. But I have 2 comments:

(1) It seems the issue you are reporting is the walking of the list in
alloc_vmap_area().

Can we not solve this by just simplifying the following code?

	/* from the starting point, walk areas until a suitable hole is found
	 */
	while (addr + size > first->va_start && addr + size <= vend) {
		if (addr + cached_hole_size < first->va_start)
			cached_hole_size = first->va_start - addr;
		addr = ALIGN(first->va_end, align);
		if (addr + size < addr)
			goto overflow;

		if (list_is_last(&first->list, &vmap_area_list))
			goto found;

		first = list_next_entry(first, list);
	}

Instead of going through the vmap_area_list, can we not just binary search
the existing address-sorted vmap_area_root rbtree to find a hole? If yes,
that would bring down the linear search overhead. If not, why not?

(2) I am curious, do you have any measurements of how much time
alloc_vmap_area() is taking? You mentioned it takes milliseconds but I was
wondering if you had more finer grained function profiling measurements. And
also any data on how big are the lists at the time you see this issue.

Good to see an effort on improving this, thanks!

 - Joel


> Description
> -----------
> This approach keeps track of free blocks and allocation is done over free list
> iteration instead. During initialization phase the vmalloc memory layout is
> organized into one free area(can be more) building free double linked list
> within VMALLOC_START-VMALLOC_END range.
> 
> Proposed algorithm uses red-black tree that keeps blocks sorted by their offsets
> in pair with linked list keeping the free space in order of increasing addresses.
> 
> Allocation. It uses a first-fit policy. To allocate a new block a search is done
> over free list areas until a first suitable block is large enough to encompass
> the requested size. If the block is bigger than requested size - it is split.
> 
> A free block can be split by three different ways. Their names are FL_FIT_TYPE,
> LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e. they correspond to how requested
> size and alignment fit to a free block.
> 
> FL_FIT_TYPE - in this case a free block is just removed from the free list/tree
> because it fully fits. Comparing with current design there is an extra work with
> rb-tree updating.
> 
> LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit. In this case what we do is
> just cutting a free block. It is as fast as a current design. Most of the vmalloc
> allocations just end up with this case, because the edge is always aligned to 1.
> 
> NE_FIT_TYPE - Is much less common case. Basically it happens when requested size
> and alignment does not fit left nor right edges, i.e. it is between them. In this
> case during splitting we have to build a remaining left free area and place it
> back to the free list/tree.
> 
> Comparing with current design there are two extra steps. First one is we have to
> allocate a new vmap_area structure. Second one we have to insert that remaining 
> free block to the address sorted list/tree.
> 
> In order to optimize a first case there is a cache with free_vmap objects. Instead
> of allocating from slab we just take an object from the cache and reuse it.
> 
> Second one is pretty optimized. Since we know a start point in the tree we do not
> do a search from the top. Instead a traversal begins from a rb-tree node we split.
> 
> De-allocation. Red-black tree allows efficiently find a spot in the tree whereas
> a linked list allows fast access to neighbors, thus a fast merge of de-allocated
> memory chunks with existing free blocks creating large coalesced areas. It means
> comparing with current design there is an extra step we have to done when a block
> is freed.
> 
> In order to optimize a merge logic a free vmap area is not inserted straight
> away into free structures. Instead we find a place in the rbtree where a free
> block potentially can be inserted. Its parent node and left or right direction.
> Knowing that, we can identify future next/prev list nodes, thus at this point
> it becomes possible to check if a block can be merged. If not, just link it.
> 
> Test environment
> ----------------
> I have used two systems to test. One is i5-3320M CPU @ 2.60GHz and another
> is HiKey960(arm64) board. i5-3320M runs on 4.18 kernel, whereas Hikey960
> uses 4.15 linaro kernel.
> 
> i5-3320M:
> set performance governor
> echo 0 > /proc/sys/kernel/nmi_watchdog
> echo -1 > /proc/sys/kernel/perf_event_paranoid
> echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
> 
> Stability and stress tests
> --------------------------
> As for stress testing of the new approach, i wrote a small patch with
> different test cases and allocations methods to make a pressure on
> vmalloc subsystem. In short, it runs different kind of allocation
> tests simultaneously on each online CPU with different run-time(few days).
> 
> A test-suite patch you can find here, it is based on 4.18 kernel.
> ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch
> 
> Below are some issues i run into during stability check phase(default kernel).
> 
> 1) This Kernel BUG can be triggered by align_shift_alloc_test() stress test.
> See it in test-suite patch:
> 
> <snip>
> [66970.279289] kernel BUG at mm/vmalloc.c:512!
> [66970.279363] invalid opcode: 0000 [#1] PREEMPT SMP PTI
> [66970.279411] CPU: 1 PID: 652 Comm: insmod Tainted: G           O      4.18.0+ #741
> [66970.279463] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> [66970.279525] RIP: 0010:alloc_vmap_area+0x358/0x370
> <snip>
> 
> Patched version does not suffer from that BUG().
> 
> 2) This one has been introduced by commit 763b218ddfaf. Which introduced some
> preemption points into __purge_vmap_area_lazy(). Under heavy simultaneous
> allocations/releases number of lazy pages can easily go beyond millions
> hitting out_of_memory -> panic or making operations like: allocation, lookup,
> unmap, remove, etc. much slower.
> 
> It is fixed by second commit in this series. Please see more description in
> the commit message of the patch.
> 
> 3) This one is related to PCPU allocator(see pcpu_alloc_test()). In that
> stress test case i see that SUnreclaim(/proc/meminfo) parameter gets increased,
> i.e. there is a memory leek somewhere in percpu allocator. It sounds like
> a memory that is allocated by pcpu_get_vm_areas() sometimes is not freed.
> Resulting in memory leaking or "Kernel panic":
> 
> ---[ end Kernel panic - not syncing: Out of memory and no killable processes...
> 
> There is no fix for that.
> 
> Performance test results
> ------------------------
> I run 5 different tests to compare the performance between the new approach
> and current one. Since there are three different type of allocations i wanted
> to compare them with default version, apart of those there are two extra.
> One allocates in long busy list condition. Another one does random number
> of pages allocation(will not post here to keep it short).
> 
> - reboot the system;
> - do three iteration of full run. One run is 5 tests;
> - calculate average of three run(microseconds).
> 
> i5-3320M:
> le_fit_alloc_test                b_fit_alloc_test
> 1218459 vs 1146597 diff 5%       972322 vs 1008655 diff -3.74%
> 1219721 vs 1145212 diff 6%      1013817 vs  994195 diff  1.94%
> 1226255 vs 1142134 diff 6%      1002057 vs  993364 diff  0.87%
> 1239828 vs 1144809 diff 7%       985092 vs  977549 diff  0.77%
> 1232131 vs 1144775 diff 7%      1031320 vs  999952 diff  3.04%
> 
> ne_fit_alloc_test                long_busy_list_alloc_test
> 2056336 vs 2043121 diff 0.64%    55866315 vs 15037680 diff 73%
> 2043136 vs 2041888 diff 0.06%    57601435 vs 14809454 diff 74%
> 2042384 vs 2040181 diff 0.11%    52612371 vs 14550292 diff 72%
> 2041287 vs 2038905 diff 0.12%    48894648 vs 14769538 diff 69%
> 2039014 vs 2038632 diff 0.02%    55718063 vs 14727350 diff 73%
> 
> Hikey960:
> le_fit_alloc_test                b_fit_alloc_test
> 2382168 vs 2115617 diff 11.19%   2864080 vs 2081309 diff 27.33%
> 2772909 vs 2114988 diff 23.73%   2968612 vs 2062716 diff 30.52%
> 2772579 vs 2113069 diff 23.79%   2748495 vs 2106658 diff 23.35%
> 2770596 vs 2111823 diff 23.78%   2966023 vs 2071139 diff 30.17%
> 2759768 vs 2111868 diff 23.48%   2765568 vs 2125216 diff 23.15%
> 
> ne_fit_alloc_test                long_busy_list_alloc_test
> 4353846 vs 4241838 diff  2.57    239789754 vs 33364305 diff 86%
> 4133506 vs 4241615 diff -2.62    778283461 vs 34551548 diff 95%
> 4134769 vs 4240714 diff -2.56    210244212 vs 33467529 diff 84%
> 4132224 vs 4242281 diff -2.66    429232377 vs 33307173 diff 92%
> 4410969 vs 4240864 diff  3.86    527560967 vs 33661115 diff 93%
> 
> Almost all results are better. Full data and the test module you can find here:
> 
> ftp://vps418301.ovh.net/incoming/vmalloc_test_module.tar.bz2
> ftp://vps418301.ovh.net/incoming/HiKey960_test_result.txt
> ftp://vps418301.ovh.net/incoming/i5-3320M_test_result.txt
> 
> Conclusion
> ----------
> According to provided results and my subjective opinion, it is worth to organize
> and maintain a free list and do an allocation based on it.
> 
> Appreciate for any valuable comments and sorry for the long description :)
> 
> Best Regards,
> Uladzislau Rezki
> 
> Uladzislau Rezki (Sony) (2):
>   mm/vmalloc: keep track of free blocks for allocation
>   mm: add priority threshold to __purge_vmap_area_lazy()
> 
>  include/linux/vmalloc.h |   2 +-
>  mm/vmalloc.c            | 850 ++++++++++++++++++++++++++++++++++++++----------
>  2 files changed, 676 insertions(+), 176 deletions(-)
> 
> -- 
> 2.11.0
> 

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki]

On Fri, Oct 19, 2018 at 05:11:45PM -0700, Joel Fernandes wrote:
> On Fri, Oct 19, 2018 at 07:35:36PM +0200, Uladzislau Rezki (Sony) wrote:
> > Objective
> > ---------
> > Initiative of improving vmalloc allocator comes from getting many issues
> > related to allocation time, i.e. sometimes it is terribly slow. As a result
> > many workloads which are sensitive for long (more than 1 millisecond) preemption
> > off scenario are affected by that slowness(test cases like UI or audio, etc.).
> > 
> > The problem is that, currently an allocation of the new VA area is done over
> > busy list iteration until a suitable hole is found between two busy areas.
> > Therefore each new allocation causes the list being grown. Due to long list
> > and different permissive parameters an allocation can take a long time on
> > embedded devices(milliseconds).
> 
> I am not super familiar with the vmap allocation code, it has been some
> years. But I have 2 comments:
> 
> (1) It seems the issue you are reporting is the walking of the list in
> alloc_vmap_area().
> 
> Can we not solve this by just simplifying the following code?
> 
> 	/* from the starting point, walk areas until a suitable hole is found
> 	 */
> 	while (addr + size > first->va_start && addr + size <= vend) {
> 		if (addr + cached_hole_size < first->va_start)
> 			cached_hole_size = first->va_start - addr;
> 		addr = ALIGN(first->va_end, align);
> 		if (addr + size < addr)
> 			goto overflow;
> 
> 		if (list_is_last(&first->list, &vmap_area_list))
> 			goto found;
> 
> 		first = list_next_entry(first, list);
> 	}
> 
> Instead of going through the vmap_area_list, can we not just binary search
> the existing address-sorted vmap_area_root rbtree to find a hole? If yes,
> that would bring down the linear search overhead. If not, why not?
>
vmap_area_root rb-tree is used for fast access to vmap_area knowing
the address(any va_start). That is why we use the tree. To use that tree
in order to check holes will require to start from the left most node or
specified "vstart" and move forward by rb_next(). What is much slower
than regular(list_next_entry O(1)) access in this case. 

> 
> (2) I am curious, do you have any measurements of how much time
> alloc_vmap_area() is taking? You mentioned it takes milliseconds but I was
> wondering if you had more finer grained function profiling measurements. And
> also any data on how big are the lists at the time you see this issue.
> 
Basically it depends on how much or heavily your system uses vmalloc
allocations. I was using CONFIG_DEBUG_PREEMPT with an extra patch. See it
here: ftp://vps418301.ovh.net/incoming/0001-tracing-track-preemption-disable-callers.patch

As for list size. It can be easily thousands.

> Good to see an effort on improving this, thanks!
> 
>  - Joel
Thank you!

> 
> 
> > Description
> > -----------
> > This approach keeps track of free blocks and allocation is done over free list
> > iteration instead. During initialization phase the vmalloc memory layout is
> > organized into one free area(can be more) building free double linked list
> > within VMALLOC_START-VMALLOC_END range.
> > 
> > Proposed algorithm uses red-black tree that keeps blocks sorted by their offsets
> > in pair with linked list keeping the free space in order of increasing addresses.
> > 
> > Allocation. It uses a first-fit policy. To allocate a new block a search is done
> > over free list areas until a first suitable block is large enough to encompass
> > the requested size. If the block is bigger than requested size - it is split.
> > 
> > A free block can be split by three different ways. Their names are FL_FIT_TYPE,
> > LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e. they correspond to how requested
> > size and alignment fit to a free block.
> > 
> > FL_FIT_TYPE - in this case a free block is just removed from the free list/tree
> > because it fully fits. Comparing with current design there is an extra work with
> > rb-tree updating.
> > 
> > LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit. In this case what we do is
> > just cutting a free block. It is as fast as a current design. Most of the vmalloc
> > allocations just end up with this case, because the edge is always aligned to 1.
> > 
> > NE_FIT_TYPE - Is much less common case. Basically it happens when requested size
> > and alignment does not fit left nor right edges, i.e. it is between them. In this
> > case during splitting we have to build a remaining left free area and place it
> > back to the free list/tree.
> > 
> > Comparing with current design there are two extra steps. First one is we have to
> > allocate a new vmap_area structure. Second one we have to insert that remaining 
> > free block to the address sorted list/tree.
> > 
> > In order to optimize a first case there is a cache with free_vmap objects. Instead
> > of allocating from slab we just take an object from the cache and reuse it.
> > 
> > Second one is pretty optimized. Since we know a start point in the tree we do not
> > do a search from the top. Instead a traversal begins from a rb-tree node we split.
> > 
> > De-allocation. Red-black tree allows efficiently find a spot in the tree whereas
> > a linked list allows fast access to neighbors, thus a fast merge of de-allocated
> > memory chunks with existing free blocks creating large coalesced areas. It means
> > comparing with current design there is an extra step we have to done when a block
> > is freed.
> > 
> > In order to optimize a merge logic a free vmap area is not inserted straight
> > away into free structures. Instead we find a place in the rbtree where a free
> > block potentially can be inserted. Its parent node and left or right direction.
> > Knowing that, we can identify future next/prev list nodes, thus at this point
> > it becomes possible to check if a block can be merged. If not, just link it.
> > 
> > Test environment
> > ----------------
> > I have used two systems to test. One is i5-3320M CPU @ 2.60GHz and another
> > is HiKey960(arm64) board. i5-3320M runs on 4.18 kernel, whereas Hikey960
> > uses 4.15 linaro kernel.
> > 
> > i5-3320M:
> > set performance governor
> > echo 0 > /proc/sys/kernel/nmi_watchdog
> > echo -1 > /proc/sys/kernel/perf_event_paranoid
> > echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
> > 
> > Stability and stress tests
> > --------------------------
> > As for stress testing of the new approach, i wrote a small patch with
> > different test cases and allocations methods to make a pressure on
> > vmalloc subsystem. In short, it runs different kind of allocation
> > tests simultaneously on each online CPU with different run-time(few days).
> > 
> > A test-suite patch you can find here, it is based on 4.18 kernel.
> > ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch
> > 
> > Below are some issues i run into during stability check phase(default kernel).
> > 
> > 1) This Kernel BUG can be triggered by align_shift_alloc_test() stress test.
> > See it in test-suite patch:
> > 
> > <snip>
> > [66970.279289] kernel BUG at mm/vmalloc.c:512!
> > [66970.279363] invalid opcode: 0000 [#1] PREEMPT SMP PTI
> > [66970.279411] CPU: 1 PID: 652 Comm: insmod Tainted: G           O      4.18.0+ #741
> > [66970.279463] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> > [66970.279525] RIP: 0010:alloc_vmap_area+0x358/0x370
> > <snip>
> > 
> > Patched version does not suffer from that BUG().
> > 
> > 2) This one has been introduced by commit 763b218ddfaf. Which introduced some
> > preemption points into __purge_vmap_area_lazy(). Under heavy simultaneous
> > allocations/releases number of lazy pages can easily go beyond millions
> > hitting out_of_memory -> panic or making operations like: allocation, lookup,
> > unmap, remove, etc. much slower.
> > 
> > It is fixed by second commit in this series. Please see more description in
> > the commit message of the patch.
> > 
> > 3) This one is related to PCPU allocator(see pcpu_alloc_test()). In that
> > stress test case i see that SUnreclaim(/proc/meminfo) parameter gets increased,
> > i.e. there is a memory leek somewhere in percpu allocator. It sounds like
> > a memory that is allocated by pcpu_get_vm_areas() sometimes is not freed.
> > Resulting in memory leaking or "Kernel panic":
> > 
> > ---[ end Kernel panic - not syncing: Out of memory and no killable processes...
> > 
> > There is no fix for that.
> > 
> > Performance test results
> > ------------------------
> > I run 5 different tests to compare the performance between the new approach
> > and current one. Since there are three different type of allocations i wanted
> > to compare them with default version, apart of those there are two extra.
> > One allocates in long busy list condition. Another one does random number
> > of pages allocation(will not post here to keep it short).
> > 
> > - reboot the system;
> > - do three iteration of full run. One run is 5 tests;
> > - calculate average of three run(microseconds).
> > 
> > i5-3320M:
> > le_fit_alloc_test                b_fit_alloc_test
> > 1218459 vs 1146597 diff 5%       972322 vs 1008655 diff -3.74%
> > 1219721 vs 1145212 diff 6%      1013817 vs  994195 diff  1.94%
> > 1226255 vs 1142134 diff 6%      1002057 vs  993364 diff  0.87%
> > 1239828 vs 1144809 diff 7%       985092 vs  977549 diff  0.77%
> > 1232131 vs 1144775 diff 7%      1031320 vs  999952 diff  3.04%
> > 
> > ne_fit_alloc_test                long_busy_list_alloc_test
> > 2056336 vs 2043121 diff 0.64%    55866315 vs 15037680 diff 73%
> > 2043136 vs 2041888 diff 0.06%    57601435 vs 14809454 diff 74%
> > 2042384 vs 2040181 diff 0.11%    52612371 vs 14550292 diff 72%
> > 2041287 vs 2038905 diff 0.12%    48894648 vs 14769538 diff 69%
> > 2039014 vs 2038632 diff 0.02%    55718063 vs 14727350 diff 73%
> > 
> > Hikey960:
> > le_fit_alloc_test                b_fit_alloc_test
> > 2382168 vs 2115617 diff 11.19%   2864080 vs 2081309 diff 27.33%
> > 2772909 vs 2114988 diff 23.73%   2968612 vs 2062716 diff 30.52%
> > 2772579 vs 2113069 diff 23.79%   2748495 vs 2106658 diff 23.35%
> > 2770596 vs 2111823 diff 23.78%   2966023 vs 2071139 diff 30.17%
> > 2759768 vs 2111868 diff 23.48%   2765568 vs 2125216 diff 23.15%
> > 
> > ne_fit_alloc_test                long_busy_list_alloc_test
> > 4353846 vs 4241838 diff  2.57    239789754 vs 33364305 diff 86%
> > 4133506 vs 4241615 diff -2.62    778283461 vs 34551548 diff 95%
> > 4134769 vs 4240714 diff -2.56    210244212 vs 33467529 diff 84%
> > 4132224 vs 4242281 diff -2.66    429232377 vs 33307173 diff 92%
> > 4410969 vs 4240864 diff  3.86    527560967 vs 33661115 diff 93%
> > 
> > Almost all results are better. Full data and the test module you can find here:
> > 
> > ftp://vps418301.ovh.net/incoming/vmalloc_test_module.tar.bz2
> > ftp://vps418301.ovh.net/incoming/HiKey960_test_result.txt
> > ftp://vps418301.ovh.net/incoming/i5-3320M_test_result.txt
> > 
> > Conclusion
> > ----------
> > According to provided results and my subjective opinion, it is worth to organize
> > and maintain a free list and do an allocation based on it.
> > 
> > Appreciate for any valuable comments and sorry for the long description :)
> > 
> > Best Regards,
> > Uladzislau Rezki
> > 
> > Uladzislau Rezki (Sony) (2):
> >   mm/vmalloc: keep track of free blocks for allocation
> >   mm: add priority threshold to __purge_vmap_area_lazy()
> > 
> >  include/linux/vmalloc.h |   2 +-
> >  mm/vmalloc.c            | 850 ++++++++++++++++++++++++++++++++++++++----------
> >  2 files changed, 676 insertions(+), 176 deletions(-)
> > 
> > -- 
> > 2.11.0
> > 

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Joel Fernandes]

On Mon, Oct 22, 2018 at 04:50:06PM +0200, Uladzislau Rezki wrote:
> On Fri, Oct 19, 2018 at 05:11:45PM -0700, Joel Fernandes wrote:
> > On Fri, Oct 19, 2018 at 07:35:36PM +0200, Uladzislau Rezki (Sony) wrote:
> > > Objective
> > > ---------
> > > Initiative of improving vmalloc allocator comes from getting many issues
> > > related to allocation time, i.e. sometimes it is terribly slow. As a result
> > > many workloads which are sensitive for long (more than 1 millisecond) preemption
> > > off scenario are affected by that slowness(test cases like UI or audio, etc.).
> > > 
> > > The problem is that, currently an allocation of the new VA area is done over
> > > busy list iteration until a suitable hole is found between two busy areas.
> > > Therefore each new allocation causes the list being grown. Due to long list
> > > and different permissive parameters an allocation can take a long time on
> > > embedded devices(milliseconds).
> > 
> > I am not super familiar with the vmap allocation code, it has been some
> > years. But I have 2 comments:
> > 
> > (1) It seems the issue you are reporting is the walking of the list in
> > alloc_vmap_area().
> > 
> > Can we not solve this by just simplifying the following code?
> > 
> > 	/* from the starting point, walk areas until a suitable hole is found
> > 	 */
> > 	while (addr + size > first->va_start && addr + size <= vend) {
> > 		if (addr + cached_hole_size < first->va_start)
> > 			cached_hole_size = first->va_start - addr;
> > 		addr = ALIGN(first->va_end, align);
> > 		if (addr + size < addr)
> > 			goto overflow;
> > 
> > 		if (list_is_last(&first->list, &vmap_area_list))
> > 			goto found;
> > 
> > 		first = list_next_entry(first, list);
> > 	}
> > 
> > Instead of going through the vmap_area_list, can we not just binary search
> > the existing address-sorted vmap_area_root rbtree to find a hole? If yes,
> > that would bring down the linear search overhead. If not, why not?
> >
> vmap_area_root rb-tree is used for fast access to vmap_area knowing
> the address(any va_start). That is why we use the tree. To use that tree
> in order to check holes will require to start from the left most node or
> specified "vstart" and move forward by rb_next(). What is much slower
> than regular(list_next_entry O(1)) access in this case. 

Ah, sorry. Don't know what I was thinking, you are right.  By the way the
binder driver does something similar too for buffer allocations, maintains an
rb tree of free areas:
https://github.com/torvalds/linux/blob/master/drivers/android/binder_alloc.c#L415

> > (2) I am curious, do you have any measurements of how much time
> > alloc_vmap_area() is taking? You mentioned it takes milliseconds but I was
> > wondering if you had more finer grained function profiling measurements. And
> > also any data on how big are the lists at the time you see this issue.
> > 
> Basically it depends on how much or heavily your system uses vmalloc
> allocations. I was using CONFIG_DEBUG_PREEMPT with an extra patch. See it
> here: ftp://vps418301.ovh.net/incoming/0001-tracing-track-preemption-disable-callers.patch
> 
> As for list size. It can be easily thousands.

Understood. I will go through your patches more in the coming days, thanks!

 - Joel

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Michal Hocko]

Hi,
I haven't read through the implementation yet but I have say that I
really love this cover letter. It is clear on intetion, it covers design
from high level enough to start discussion and provides a very nice
testing coverage. Nice work!

I also think that we need a better performing vmalloc implementation
long term because of the increasing number of kvmalloc users.

I just have two mostly workflow specific comments.

> A test-suite patch you can find here, it is based on 4.18 kernel.
> ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch

Can you fit this stress test into the standard self test machinery?

> It is fixed by second commit in this series. Please see more description in
> the commit message of the patch.

Bug fixes should go first and new functionality should be built on top.
A kernel crash sounds serious enough to have a fix marked for stable. If
the fix is too hard/complex then we might consider a revert of the
faulty commit.
> 
> 3) This one is related to PCPU allocator(see pcpu_alloc_test()). In that
> stress test case i see that SUnreclaim(/proc/meminfo) parameter gets increased,
> i.e. there is a memory leek somewhere in percpu allocator. It sounds like
> a memory that is allocated by pcpu_get_vm_areas() sometimes is not freed.
> Resulting in memory leaking or "Kernel panic":
> 
> ---[ end Kernel panic - not syncing: Out of memory and no killable processes...

It would be great to pin point this one down before the rework as well.

Thanks a lot!
-- 
Michal Hocko
SUSE Labs

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki]

On Mon, Oct 22, 2018 at 02:51:42PM +0200, Michal Hocko wrote:
> Hi,
> I haven't read through the implementation yet but I have say that I
> really love this cover letter. It is clear on intetion, it covers design
> from high level enough to start discussion and provides a very nice
> testing coverage. Nice work!
> 
> I also think that we need a better performing vmalloc implementation
> long term because of the increasing number of kvmalloc users.
> 
> I just have two mostly workflow specific comments.
> 
> > A test-suite patch you can find here, it is based on 4.18 kernel.
> > ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch
> 
> Can you fit this stress test into the standard self test machinery?
> 
If you mean "tools/testing/selftests", then i can fit that as a kernel module.
But not all the tests i can trigger from kernel module, because 3 of 8 tests
use __vmalloc_node_range() function that is not marked as EXPORT_SYMBOL.

> > It is fixed by second commit in this series. Please see more description in
> > the commit message of the patch.
> 
> Bug fixes should go first and new functionality should be built on top.
>
Thanks for the good point.

> A kernel crash sounds serious enough to have a fix marked for stable. If
> the fix is too hard/complex then we might consider a revert of the
> faulty commit.
>
The fix is straightforward and easy. It adds a threshold passing which we
forbid cond_resched_lock() and continue draining of lazy pages.

> >
> > 3) This one is related to PCPU allocator(see pcpu_alloc_test()). In that
> > stress test case i see that SUnreclaim(/proc/meminfo) parameter gets increased,
> > i.e. there is a memory leek somewhere in percpu allocator. It sounds like
> > a memory that is allocated by pcpu_get_vm_areas() sometimes is not freed.
> > Resulting in memory leaking or "Kernel panic":
> > 
> > ---[ end Kernel panic - not syncing: Out of memory and no killable processes...
> 
> It would be great to pin point this one down before the rework as well.
> 
Actually it has been fixed recently. Roman Gushchin pointed to the:

6685b357363b ("percpu: stop leaking bitmap metadata blocks")

i have checked, it works fine and fixes a leak i see.

Thank you!

--
Vlad Rezki

> Thanks a lot!
> -- 
> Michal Hocko
> SUSE Labs

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Michal Hocko]

Hi Shuah,

On Mon 22-10-18 18:52:53, Uladzislau Rezki wrote:
> On Mon, Oct 22, 2018 at 02:51:42PM +0200, Michal Hocko wrote:
> > Hi,
> > I haven't read through the implementation yet but I have say that I
> > really love this cover letter. It is clear on intetion, it covers design
> > from high level enough to start discussion and provides a very nice
> > testing coverage. Nice work!
> > 
> > I also think that we need a better performing vmalloc implementation
> > long term because of the increasing number of kvmalloc users.
> > 
> > I just have two mostly workflow specific comments.
> > 
> > > A test-suite patch you can find here, it is based on 4.18 kernel.
> > > ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch
> > 
> > Can you fit this stress test into the standard self test machinery?
> > 
> If you mean "tools/testing/selftests", then i can fit that as a kernel module.
> But not all the tests i can trigger from kernel module, because 3 of 8 tests
> use __vmalloc_node_range() function that is not marked as EXPORT_SYMBOL.

Is there any way to conditionally export these internal symbols just for
kselftests? Or is there any other standard way how to test internal
functionality that is not exported to modules?
-- 
Michal Hocko
SUSE Labs

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Shuah Khan]

Hi Michal,

On 10/23/2018 01:23 AM, Michal Hocko wrote:
> Hi Shuah,
> 
> On Mon 22-10-18 18:52:53, Uladzislau Rezki wrote:
>> On Mon, Oct 22, 2018 at 02:51:42PM +0200, Michal Hocko wrote:
>>> Hi,
>>> I haven't read through the implementation yet but I have say that I
>>> really love this cover letter. It is clear on intetion, it covers design
>>> from high level enough to start discussion and provides a very nice
>>> testing coverage. Nice work!
>>>
>>> I also think that we need a better performing vmalloc implementation
>>> long term because of the increasing number of kvmalloc users.
>>>
>>> I just have two mostly workflow specific comments.
>>>
>>>> A test-suite patch you can find here, it is based on 4.18 kernel.
>>>> ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch
>>>
>>> Can you fit this stress test into the standard self test machinery?
>>>
>> If you mean "tools/testing/selftests", then i can fit that as a kernel module.
>> But not all the tests i can trigger from kernel module, because 3 of 8 tests
>> use __vmalloc_node_range() function that is not marked as EXPORT_SYMBOL.
> 
> Is there any way to conditionally export these internal symbols just for
> kselftests? Or is there any other standard way how to test internal
> functionality that is not exported to modules?
> 

The way it can be handled is by adding a test module under lib. test_kmod,
test_sysctl, test_user_copy etc.

There is a corresponding test script e.g selftests/kmod/kmod.sh that loads
the module and runs tests.

Take a look at lib/test_overflow.c - It is running some vmalloc_node tests
test_overflow.c:DEFINE_TEST_ALLOC(vmalloc_node,  vfree,	     0, 0, 1);
test_overflow.c:DEFINE_TEST_ALLOC(kvmalloc_node, kvfree,     0, 1, 1);
test_overflow.c:	err |= test_kvmalloc_node(NULL);
test_overflow.c:	err |= test_vmalloc_node(NULL);

This module could be extended to tun these stress tests perhaps? I don't see a
selftests test script for test_overflow, one could be added.

Adding Kees Cook to the thread for input on test_overflow.

thanks,
-- Shuah

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Matthew Wilcox]

On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> Hi Michal,
> 
> On 10/23/2018 01:23 AM, Michal Hocko wrote:
> > Hi Shuah,
> > 
> > On Mon 22-10-18 18:52:53, Uladzislau Rezki wrote:
> >> On Mon, Oct 22, 2018 at 02:51:42PM +0200, Michal Hocko wrote:
> >>> Hi,
> >>> I haven't read through the implementation yet but I have say that I
> >>> really love this cover letter. It is clear on intetion, it covers design
> >>> from high level enough to start discussion and provides a very nice
> >>> testing coverage. Nice work!
> >>>
> >>> I also think that we need a better performing vmalloc implementation
> >>> long term because of the increasing number of kvmalloc users.
> >>>
> >>> I just have two mostly workflow specific comments.
> >>>
> >>>> A test-suite patch you can find here, it is based on 4.18 kernel.
> >>>> ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch
> >>>
> >>> Can you fit this stress test into the standard self test machinery?
> >>>
> >> If you mean "tools/testing/selftests", then i can fit that as a kernel module.
> >> But not all the tests i can trigger from kernel module, because 3 of 8 tests
> >> use __vmalloc_node_range() function that is not marked as EXPORT_SYMBOL.
> > 
> > Is there any way to conditionally export these internal symbols just for
> > kselftests? Or is there any other standard way how to test internal
> > functionality that is not exported to modules?
> > 
> 
> The way it can be handled is by adding a test module under lib. test_kmod,
> test_sysctl, test_user_copy etc.

The problem is that said module can only invoke functions which are
exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
which I don't think we're willing to pay, purely to get test coverage.

Based on my own experience with the IDA & XArray test suites, I would
like to propose a solution which does not require exporting all of
these symbols:

Create a new kernel module in mm/test_vmalloc.c

Towards the top of that file,

#include <linux/export.h>
#undef EXPORT_SYMBOL
#define EXPORT_SYMBOL(x)	/* */
#include "vmalloc.c"

Now you can invoke even static functions from your test harness.

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Michal Hocko]

On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
[...]
> > The way it can be handled is by adding a test module under lib. test_kmod,
> > test_sysctl, test_user_copy etc.
> 
> The problem is that said module can only invoke functions which are
> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
> which I don't think we're willing to pay, purely to get test coverage.

Yes, I think we do not want to export internal functionality which might
be still interesting for the testing coverage. Maybe we want something
like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
kselftest machinery but it wouldn't allow the same for general modules
and will not give any API promisses.

I wouldn't be surprised if we found some cases of EXPORT_SYMBOL* just to
make a symbol available for testing which would be unfortunate.
-- 
Michal Hocko
SUSE Labs

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Shuah Khan]

On 10/23/2018 11:05 AM, Michal Hocko wrote:
> On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
>> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> [...]
>>> The way it can be handled is by adding a test module under lib. test_kmod,
>>> test_sysctl, test_user_copy etc.
>>
>> The problem is that said module can only invoke functions which are
>> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
>> which I don't think we're willing to pay, purely to get test coverage.
> 
> Yes, I think we do not want to export internal functionality which might
> be still interesting for the testing coverage. Maybe we want something
> like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
> kselftest machinery but it wouldn't allow the same for general modules
> and will not give any API promisses.
> 

I like this proposal. I think we will open up lot of test opportunities with
this approach.

Maybe we can use this stress test as a pilot and see where it takes us.

thanks,
-- Shuah

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Joel Fernandes]

On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
> On 10/23/2018 11:05 AM, Michal Hocko wrote:
> > On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
> >> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> > [...]
> >>> The way it can be handled is by adding a test module under lib. test_kmod,
> >>> test_sysctl, test_user_copy etc.
> >>
> >> The problem is that said module can only invoke functions which are
> >> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
> >> which I don't think we're willing to pay, purely to get test coverage.
> > 
> > Yes, I think we do not want to export internal functionality which might
> > be still interesting for the testing coverage. Maybe we want something
> > like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
> > kselftest machinery but it wouldn't allow the same for general modules
> > and will not give any API promisses.
> > 
> 
> I like this proposal. I think we will open up lot of test opportunities with
> this approach.
> 
> Maybe we can use this stress test as a pilot and see where it takes us.

I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
out-of-tree module writers to call internal functionality.

How would you prevent that?

thanks,

 - Joel

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Shuah Khan]

On 10/23/2018 01:30 PM, Joel Fernandes wrote:
> On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
>> On 10/23/2018 11:05 AM, Michal Hocko wrote:
>>> On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
>>>> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
>>> [...]
>>>>> The way it can be handled is by adding a test module under lib. test_kmod,
>>>>> test_sysctl, test_user_copy etc.
>>>>
>>>> The problem is that said module can only invoke functions which are
>>>> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
>>>> which I don't think we're willing to pay, purely to get test coverage.
>>>
>>> Yes, I think we do not want to export internal functionality which might
>>> be still interesting for the testing coverage. Maybe we want something
>>> like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
>>> kselftest machinery but it wouldn't allow the same for general modules
>>> and will not give any API promisses.
>>>
>>
>> I like this proposal. I think we will open up lot of test opportunities with
>> this approach.
>>
>> Maybe we can use this stress test as a pilot and see where it takes us.
> 
> I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
> out-of-tree module writers to call internal functionality.

That is  valid concern to consider before we go forward with the proposal.

We could wrap EXPORT_SYMBOL_KSELFTEST this in an existing debug option. This could
be fine grained for each sub-system for its debug option. We do have a few of these
now

# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_BT_SELFTEST is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
# CONFIG_CHASH_SELFTEST is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_RANDOM32_SELFTEST is not set
# CONFIG_GLOB_SELFTEST is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set

thanks,
-- Shuah

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Matthew Wilcox]

On Tue, Oct 23, 2018 at 01:48:32PM -0600, Shuah Khan wrote:
> On 10/23/2018 01:30 PM, Joel Fernandes wrote:
> > On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
> >> I like this proposal. I think we will open up lot of test opportunities with
> >> this approach.
> >>
> >> Maybe we can use this stress test as a pilot and see where it takes us.
> > 
> > I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
> > out-of-tree module writers to call internal functionality.
> 
> That is  valid concern to consider before we go forward with the proposal.
> 
> We could wrap EXPORT_SYMBOL_KSELFTEST this in an existing debug option. This could
> be fine grained for each sub-system for its debug option. We do have a few of these
> now

This all seems far more complicated than my proposed solution.

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Shuah Khan]

On 10/23/2018 02:09 PM, Matthew Wilcox wrote:
> On Tue, Oct 23, 2018 at 01:48:32PM -0600, Shuah Khan wrote:
>> On 10/23/2018 01:30 PM, Joel Fernandes wrote:
>>> On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
>>>> I like this proposal. I think we will open up lot of test opportunities with
>>>> this approach.
>>>>
>>>> Maybe we can use this stress test as a pilot and see where it takes us.
>>>
>>> I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
>>> out-of-tree module writers to call internal functionality.
>>
>> That is  valid concern to consider before we go forward with the proposal.
>>
>> We could wrap EXPORT_SYMBOL_KSELFTEST this in an existing debug option. This could
>> be fine grained for each sub-system for its debug option. We do have a few of these
>> now
> 
> This all seems far more complicated than my proposed solution.
> 

Not sure if it that complicated. But it is more involved. It dies have the
advantage of fitting in with the rest of the debug/test type framework we
already have.

The option you proposed sounds simpler, however it sounds a bit adhoc to me.

In any case I went looking for EXPORT_SYMBOL defines and found them in 

tools/include/asm/export.h
tools/include/linux/export.h
tools/virtio/linux/export.h

selftests/powerpc/copyloops/asm/export.h
selftests/powerpc/stringloops/asm/export.h

thanks,
-- Shuah

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Joel Fernandes]

On Tue, Oct 23, 2018 at 01:09:23PM -0700, Matthew Wilcox wrote:
> On Tue, Oct 23, 2018 at 01:48:32PM -0600, Shuah Khan wrote:
> > On 10/23/2018 01:30 PM, Joel Fernandes wrote:
> > > On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
> > >> I like this proposal. I think we will open up lot of test opportunities with
> > >> this approach.
> > >>
> > >> Maybe we can use this stress test as a pilot and see where it takes us.
> > > 
> > > I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
> > > out-of-tree module writers to call internal functionality.
> > 
> > That is  valid concern to consider before we go forward with the proposal.
> > 
> > We could wrap EXPORT_SYMBOL_KSELFTEST this in an existing debug option. This could
> > be fine grained for each sub-system for its debug option. We do have a few of these
> > now
> 
> This all seems far more complicated than my proposed solution.

Matthew's solution seems Ok to me where it works. A problem could be that it
will not always work.

As an example, recently I wanted to directly set the sysctl_sched_rt_runtime
variable from the rcutorture test, just for forcing some conditions. This
symbol is internal and inaccessible from modules. This can also be done by
calling the internal sched_rt_handler with some parameters.  However I don't
think including an internal source file in a test source file can achieve the
objective of setting it since access to the internal symbol is not possible
without exporting it somehow. This could be a "special" case too but is an
example where the include trick may fall apart.

I do think its a cool trick though ;-)

 - Joel

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Michal Hocko]

On Tue 23-10-18 12:30:44, Joel Fernandes wrote:
> On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
> > On 10/23/2018 11:05 AM, Michal Hocko wrote:
> > > On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
> > >> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> > > [...]
> > >>> The way it can be handled is by adding a test module under lib. test_kmod,
> > >>> test_sysctl, test_user_copy etc.
> > >>
> > >> The problem is that said module can only invoke functions which are
> > >> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
> > >> which I don't think we're willing to pay, purely to get test coverage.
> > > 
> > > Yes, I think we do not want to export internal functionality which might
> > > be still interesting for the testing coverage. Maybe we want something
> > > like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
> > > kselftest machinery but it wouldn't allow the same for general modules
> > > and will not give any API promisses.
> > > 
> > 
> > I like this proposal. I think we will open up lot of test opportunities with
> > this approach.
> > 
> > Maybe we can use this stress test as a pilot and see where it takes us.
> 
> I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
> out-of-tree module writers to call internal functionality.
> 
> How would you prevent that?

There is no way to prevent non-exported symbols abuse by 3rd party
AFAIK. EXPORT_SYMBOL_* is not there to prohibid abuse. It is a mere
signal of what is, well, an exported API.
-- 
Michal Hocko
SUSE Labs

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki]

Hi.

On Wed, Oct 24, 2018 at 08:22:52AM +0200, Michal Hocko wrote:
> On Tue 23-10-18 12:30:44, Joel Fernandes wrote:
> > On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
> > > On 10/23/2018 11:05 AM, Michal Hocko wrote:
> > > > On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
> > > >> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> > > > [...]
> > > >>> The way it can be handled is by adding a test module under lib. test_kmod,
> > > >>> test_sysctl, test_user_copy etc.
> > > >>
> > > >> The problem is that said module can only invoke functions which are
> > > >> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
> > > >> which I don't think we're willing to pay, purely to get test coverage.
> > > > 
> > > > Yes, I think we do not want to export internal functionality which might
> > > > be still interesting for the testing coverage. Maybe we want something
> > > > like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
> > > > kselftest machinery but it wouldn't allow the same for general modules
> > > > and will not give any API promisses.
> > > > 
> > > 
> > > I like this proposal. I think we will open up lot of test opportunities with
> > > this approach.
> > > 
> > > Maybe we can use this stress test as a pilot and see where it takes us.
> > 
> > I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
> > out-of-tree module writers to call internal functionality.
> > 
> > How would you prevent that?
> 
> There is no way to prevent non-exported symbols abuse by 3rd party
> AFAIK. EXPORT_SYMBOL_* is not there to prohibid abuse. It is a mere
> signal of what is, well, an exported API.
> -- 
> Michal Hocko
> SUSE Labs

Can we just use kallsyms_lookup_name()?

<snip>
static void *((*__my_vmalloc_node_range)(unsigned long size,
    unsigned long align,unsigned long start, unsigned long end,
    gfp_t gfp_mask,pgprot_t prot, unsigned long vm_flags,
    int node, const void *caller));

__my_vmalloc_node_range = (void *) kallsyms_lookup_name("__vmalloc_node_range");
<snip>

--
Vlad Rezki

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Michal Hocko]

On Wed 24-10-18 19:34:18, Uladzislau Rezki wrote:
> Hi.
> 
> On Wed, Oct 24, 2018 at 08:22:52AM +0200, Michal Hocko wrote:
> > On Tue 23-10-18 12:30:44, Joel Fernandes wrote:
> > > On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
> > > > On 10/23/2018 11:05 AM, Michal Hocko wrote:
> > > > > On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
> > > > >> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> > > > > [...]
> > > > >>> The way it can be handled is by adding a test module under lib. test_kmod,
> > > > >>> test_sysctl, test_user_copy etc.
> > > > >>
> > > > >> The problem is that said module can only invoke functions which are
> > > > >> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
> > > > >> which I don't think we're willing to pay, purely to get test coverage.
> > > > > 
> > > > > Yes, I think we do not want to export internal functionality which might
> > > > > be still interesting for the testing coverage. Maybe we want something
> > > > > like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
> > > > > kselftest machinery but it wouldn't allow the same for general modules
> > > > > and will not give any API promisses.
> > > > > 
> > > > 
> > > > I like this proposal. I think we will open up lot of test opportunities with
> > > > this approach.
> > > > 
> > > > Maybe we can use this stress test as a pilot and see where it takes us.
> > > 
> > > I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
> > > out-of-tree module writers to call internal functionality.
> > > 
> > > How would you prevent that?
> > 
> > There is no way to prevent non-exported symbols abuse by 3rd party
> > AFAIK. EXPORT_SYMBOL_* is not there to prohibid abuse. It is a mere
> > signal of what is, well, an exported API.
> 
> Can we just use kallsyms_lookup_name()?

Heh, this is the abuse I've had in mind ;)
> <snip>
> static void *((*__my_vmalloc_node_range)(unsigned long size,
>     unsigned long align,unsigned long start, unsigned long end,
>     gfp_t gfp_mask,pgprot_t prot, unsigned long vm_flags,
>     int node, const void *caller));
> 
> __my_vmalloc_node_range = (void *) kallsyms_lookup_name("__vmalloc_node_range");
> <snip>

This is just too ugly to live. So I would go with it only if there is no
reasonable way to export what tests need with a sane interface.
-- 
Michal Hocko
SUSE Labs

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki]

On Thu, Oct 25, 2018 at 10:43:27AM +0200, Michal Hocko wrote:
> On Wed 24-10-18 19:34:18, Uladzislau Rezki wrote:
> > Hi.
> > 
> > On Wed, Oct 24, 2018 at 08:22:52AM +0200, Michal Hocko wrote:
> > > On Tue 23-10-18 12:30:44, Joel Fernandes wrote:
> > > > On Tue, Oct 23, 2018 at 11:13:36AM -0600, Shuah Khan wrote:
> > > > > On 10/23/2018 11:05 AM, Michal Hocko wrote:
> > > > > > On Tue 23-10-18 08:26:40, Matthew Wilcox wrote:
> > > > > >> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> > > > > > [...]
> > > > > >>> The way it can be handled is by adding a test module under lib. test_kmod,
> > > > > >>> test_sysctl, test_user_copy etc.
> > > > > >>
> > > > > >> The problem is that said module can only invoke functions which are
> > > > > >> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
> > > > > >> which I don't think we're willing to pay, purely to get test coverage.
> > > > > > 
> > > > > > Yes, I think we do not want to export internal functionality which might
> > > > > > be still interesting for the testing coverage. Maybe we want something
> > > > > > like EXPORT_SYMBOL_KSELFTEST which would allow to link within the
> > > > > > kselftest machinery but it wouldn't allow the same for general modules
> > > > > > and will not give any API promisses.
> > > > > > 
> > > > > 
> > > > > I like this proposal. I think we will open up lot of test opportunities with
> > > > > this approach.
> > > > > 
> > > > > Maybe we can use this stress test as a pilot and see where it takes us.
> > > > 
> > > > I am a bit worried that such an EXPORT_SYMBOL_KSELFTEST mechanism can be abused by
> > > > out-of-tree module writers to call internal functionality.
> > > > 
> > > > How would you prevent that?
> > > 
> > > There is no way to prevent non-exported symbols abuse by 3rd party
> > > AFAIK. EXPORT_SYMBOL_* is not there to prohibid abuse. It is a mere
> > > signal of what is, well, an exported API.
> > 
> > Can we just use kallsyms_lookup_name()?
> 
> Heh, this is the abuse I've had in mind ;)
> > <snip>
> > static void *((*__my_vmalloc_node_range)(unsigned long size,
> >     unsigned long align,unsigned long start, unsigned long end,
> >     gfp_t gfp_mask,pgprot_t prot, unsigned long vm_flags,
> >     int node, const void *caller));
> > 
> > __my_vmalloc_node_range = (void *) kallsyms_lookup_name("__vmalloc_node_range");
> > <snip>
> 
> This is just too ugly to live. So I would go with it only if there is no
> reasonable way to export what tests need with a sane interface.
Agree, that is a bit ugly and not generic even though it is easy :)

--
Vlad Rezki

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki]

On Tue, Oct 23, 2018 at 08:26:40AM -0700, Matthew Wilcox wrote:
> On Tue, Oct 23, 2018 at 09:02:56AM -0600, Shuah Khan wrote:
> > Hi Michal,
> > 
> > On 10/23/2018 01:23 AM, Michal Hocko wrote:
> > > Hi Shuah,
> > > 
> > > On Mon 22-10-18 18:52:53, Uladzislau Rezki wrote:
> > >> On Mon, Oct 22, 2018 at 02:51:42PM +0200, Michal Hocko wrote:
> > >>> Hi,
> > >>> I haven't read through the implementation yet but I have say that I
> > >>> really love this cover letter. It is clear on intetion, it covers design
> > >>> from high level enough to start discussion and provides a very nice
> > >>> testing coverage. Nice work!
> > >>>
> > >>> I also think that we need a better performing vmalloc implementation
> > >>> long term because of the increasing number of kvmalloc users.
> > >>>
> > >>> I just have two mostly workflow specific comments.
> > >>>
> > >>>> A test-suite patch you can find here, it is based on 4.18 kernel.
> > >>>> ftp://vps418301.ovh.net/incoming/0001-mm-vmalloc-stress-test-suite-v4.18.patch
> > >>>
> > >>> Can you fit this stress test into the standard self test machinery?
> > >>>
> > >> If you mean "tools/testing/selftests", then i can fit that as a kernel module.
> > >> But not all the tests i can trigger from kernel module, because 3 of 8 tests
> > >> use __vmalloc_node_range() function that is not marked as EXPORT_SYMBOL.
> > > 
> > > Is there any way to conditionally export these internal symbols just for
> > > kselftests? Or is there any other standard way how to test internal
> > > functionality that is not exported to modules?
> > > 
> > 
> > The way it can be handled is by adding a test module under lib. test_kmod,
> > test_sysctl, test_user_copy etc.
> 
> The problem is that said module can only invoke functions which are
> exported using EXPORT_SYMBOL.  And there's a cost to exporting them,
> which I don't think we're willing to pay, purely to get test coverage.
> 
> Based on my own experience with the IDA & XArray test suites, I would
> like to propose a solution which does not require exporting all of
> these symbols:
> 
> Create a new kernel module in mm/test_vmalloc.c
> 
> Towards the top of that file,
> 
> #include <linux/export.h>
> #undef EXPORT_SYMBOL
> #define EXPORT_SYMBOL(x)	/* */
> #include "vmalloc.c"
> 
> Now you can invoke even static functions from your test harness.
I see your point. But i also think that it would not be so easy to go.

<snip>
#undef CONFIG_HAVE_ARCH_HUGE_VMAP
#undef CONFIG_PROC_FS

#include "../hikey_linux.git/mm/vmalloc.c"
#include <linux/random.h>
<snip>

<snip>
  LD [M]  /mnt/coding/vmalloc_performance_test/vmalloc_test.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: "__pud_alloc" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "__sync_icache_dcache" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "warn_alloc" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "pmd_clear_bad" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "pgd_clear_bad" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "swapper_pg_dir" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "__pmd_alloc" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "pud_clear_bad" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
WARNING: "__pte_alloc_kernel" [/mnt/coding/vmalloc_performance_test/vmalloc_test.ko] undefined!
 LD [M]  /mnt/coding/vmalloc_performance_test/vmalloc_test.ko
<snip>

i.e. i will need either link with objects where those functions are or
wrap them up somehow. 

Thanks!

--
Vlad Rezki

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Andrew Morton]

On Fri, 19 Oct 2018 19:35:36 +0200 "Uladzislau Rezki (Sony)" <urezki@gmail.com> wrote:

> improving vmalloc allocator

It's about time ;)

Are you aware of https://lwn.net/Articles/285341/ ?  If not, please do
take a look through Nick's work and see if there are any good things
there which can be borrowed.

Re: [RFC PATCH 0/2] improve vmalloc allocation

[Uladzislau Rezki]

On Wed, Oct 24, 2018 at 04:01:06PM -0700, Andrew Morton wrote:
> On Fri, 19 Oct 2018 19:35:36 +0200 "Uladzislau Rezki (Sony)" <urezki@gmail.com> wrote:
> 
> > improving vmalloc allocator
> 
> It's about time ;)
> 
> Are you aware of https://lwn.net/Articles/285341/ ?  If not, please do
> take a look through Nick's work and see if there are any good things
> there which can be borrowed.
> 
No, i have not known about that. I will go through that work to see if
there is something there!

Thanks :)

--
Vlad Rezki