* [PATCH 0/1] bus: simplify getting .driver_data
@ 2018-10-21 19:59 Wolfram Sang
2018-10-21 19:59 ` [PATCH 1/1] bus: brcmstb_gisb: " Wolfram Sang
0 siblings, 1 reply; 3+ messages in thread
From: Wolfram Sang @ 2018-10-21 19:59 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-renesas-soc, Wolfram Sang, linux-arm-kernel
I got tired of fixing this in Renesas drivers manually, so I took the big
hammer. Remove this cumbersome code pattern which got copy-pasted too much
already:
- struct platform_device *pdev = to_platform_device(dev);
- struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+ struct ep93xx_keypad *keypad = dev_get_drvdata(dev);
A branch, tested by buildbot, can be found here:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git coccinelle/get_drvdata
I have been asked if it couldn't be done for dev_set_drvdata as well. I checked
it and did not find one occasion where it could be simplified like this. Not
much of a surprise because driver_data is usually set in probe() functions
which access struct platform_device in many other ways.
I am open for other comments, suggestions, too, of course.
Here is the cocci-script I created:
@@
struct device* d;
identifier pdev;
expression *ptr;
@@
(
- struct platform_device *pdev = to_platform_device(d);
|
- struct platform_device *pdev;
...
- pdev = to_platform_device(d);
)
<... when != pdev
- &pdev->dev
+ d
...>
ptr =
- platform_get_drvdata(pdev)
+ dev_get_drvdata(d)
<... when != pdev
- &pdev->dev
+ d
...>
Kind regards,
Wolfram
Wolfram Sang (1):
bus: brcmstb_gisb: simplify getting .driver_data
drivers/bus/brcmstb_gisb.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
--
2.19.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 1/1] bus: brcmstb_gisb: simplify getting .driver_data
2018-10-21 19:59 [PATCH 0/1] bus: simplify getting .driver_data Wolfram Sang
@ 2018-10-21 19:59 ` Wolfram Sang
2018-11-05 20:37 ` Florian Fainelli
0 siblings, 1 reply; 3+ messages in thread
From: Wolfram Sang @ 2018-10-21 19:59 UTC (permalink / raw)
To: linux-kernel
Cc: linux-renesas-soc, Wolfram Sang, Brian Norris, Gregory Fong,
Florian Fainelli, bcm-kernel-feedback-list, linux-arm-kernel
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Build tested only. buildbot is happy.
drivers/bus/brcmstb_gisb.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index 68ac3e93b600..f58ff67e97ac 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -150,8 +150,7 @@ static ssize_t gisb_arb_get_timeout(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+ struct brcmstb_gisb_arb_device *gdev = dev_get_drvdata(dev);
u32 timeout;
mutex_lock(&gdev->lock);
@@ -165,8 +164,7 @@ static ssize_t gisb_arb_set_timeout(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+ struct brcmstb_gisb_arb_device *gdev = dev_get_drvdata(dev);
int val, ret;
ret = kstrtoint(buf, 10, &val);
@@ -418,8 +416,7 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
#ifdef CONFIG_PM_SLEEP
static int brcmstb_gisb_arb_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+ struct brcmstb_gisb_arb_device *gdev = dev_get_drvdata(dev);
gdev->saved_timeout = gisb_read(gdev, ARB_TIMER);
@@ -431,8 +428,7 @@ static int brcmstb_gisb_arb_suspend(struct device *dev)
*/
static int brcmstb_gisb_arb_resume_noirq(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+ struct brcmstb_gisb_arb_device *gdev = dev_get_drvdata(dev);
gisb_write(gdev, gdev->saved_timeout, ARB_TIMER);
--
2.19.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/1] bus: brcmstb_gisb: simplify getting .driver_data
2018-10-21 19:59 ` [PATCH 1/1] bus: brcmstb_gisb: " Wolfram Sang
@ 2018-11-05 20:37 ` Florian Fainelli
0 siblings, 0 replies; 3+ messages in thread
From: Florian Fainelli @ 2018-11-05 20:37 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Wolfram Sang, linux-kernel
Cc: linux-renesas-soc, Brian Norris, Gregory Fong, linux-arm-kernel
On Sun, 21 Oct 2018 21:59:58 +0200, Wolfram Sang <wsa+renesas@sang-engineering.com> wrote:
> We should get 'driver_data' from 'struct device' directly. Going via
> platform_device is an unneeded step back and forth.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
Applied to drivers/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-05 20:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-21 19:59 [PATCH 0/1] bus: simplify getting .driver_data Wolfram Sang
2018-10-21 19:59 ` [PATCH 1/1] bus: brcmstb_gisb: " Wolfram Sang
2018-11-05 20:37 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).