* [PATCH] ARM: dts: fix imx7d boot spi dma setup error
@ 2018-10-23 8:36 Clark Wang
2018-10-23 10:13 ` Uwe Kleine-König
0 siblings, 1 reply; 2+ messages in thread
From: Clark Wang @ 2018-10-23 8:36 UTC (permalink / raw)
To: shawnguo, s.hauer, robh+dt, mark.rutland
Cc: kernel, Fabio Estevam, dl-linux-imx, linux-arm-kernel,
devicetree, linux-kernel, Clark Wang
Add dmas and dma-names for ecspi1~4 to fix kernel boot error:
"spi_imx 30840000.ecspi: dma setup error -19, use pio".
Signed-off-by: Xiaoning Wang <xiaoning.wang@nxp.com>
---
arch/arm/boot/dts/imx7s.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index aa8df7d93b2e..043e39124c43 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -651,6 +651,8 @@
clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
<&clks IMX7D_ECSPI4_ROOT_CLK>;
clock-names = "ipg", "per";
+ dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -732,6 +734,8 @@
clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
<&clks IMX7D_ECSPI1_ROOT_CLK>;
clock-names = "ipg", "per";
+ dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -744,6 +748,8 @@
clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
<&clks IMX7D_ECSPI2_ROOT_CLK>;
clock-names = "ipg", "per";
+ dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -756,6 +762,8 @@
clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
<&clks IMX7D_ECSPI3_ROOT_CLK>;
clock-names = "ipg", "per";
+ dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: fix imx7d boot spi dma setup error
2018-10-23 8:36 [PATCH] ARM: dts: fix imx7d boot spi dma setup error Clark Wang
@ 2018-10-23 10:13 ` Uwe Kleine-König
0 siblings, 0 replies; 2+ messages in thread
From: Uwe Kleine-König @ 2018-10-23 10:13 UTC (permalink / raw)
To: Clark Wang
Cc: shawnguo, s.hauer, robh+dt, mark.rutland, devicetree,
linux-kernel, dl-linux-imx, kernel, Fabio Estevam,
linux-arm-kernel, Gavin Schenk, Oleksij Rempel
On Tue, Oct 23, 2018 at 08:36:17AM +0000, Clark Wang wrote:
> Add dmas and dma-names for ecspi1~4 to fix kernel boot error:
> "spi_imx 30840000.ecspi: dma setup error -19, use pio".
Actually this should not be an error and the message is supposed to say:
Unable to setup DMA, falling back to PIO
So IMHO this should be downgraded from dev_err to dev_info and reworded.
Maybe even try DMA-setup on devices where it is known to fail and don't
emit a message on -ENODEV at all.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-10-23 10:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-23 8:36 [PATCH] ARM: dts: fix imx7d boot spi dma setup error Clark Wang
2018-10-23 10:13 ` Uwe Kleine-König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).