From: andy.tang@nxp.com
To: sboyd@kernel.org, mturquette@baylibre.com, oss@buserror.net
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Tang Yuantian <andy.tang@nxp.com>
Subject: [PATCH 1/3 v2] powerpc/fsl: Use new clockgen binding
Date: Wed, 24 Oct 2018 10:11:20 +0800 [thread overview]
Message-ID: <20181024021122.3942-1-andy.tang@nxp.com> (raw)
From: Scott Wood <oss@buserror.net>
The driver retains compatibility with old device trees, but we don't
want the old nodes lying around to be copied, or used as a reference
(some of the mux options are incorrect), or even just being clutter.
We will also need the #clock-cells in the clockgen node in order to
add fman nodes.
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
v2:
- involve more soc
arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi | 8 ++--
arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 15 -----
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 18 ------
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 8 ++--
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 18 ------
arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 8 ++--
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 70 ------------------------
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 16 +++---
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 18 ------
arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi | 8 ++--
arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 55 +++----------------
arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 38 +++----------
arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 16 ------
arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 44 ---------------
arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi | 8 ++--
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 22 --------
arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi | 8 ++--
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 61 ---------------------
arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi | 24 ++++----
22 files changed, 66 insertions(+), 409 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 88d8423..bb7b9b9 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -70,14 +70,14 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index f3f968c..388ba1b 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -75,28 +75,28 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 1b33f51..4f044b4 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -398,21 +398,6 @@
};
/include/ "qoriq-clockgen2.dtsi"
- clockgen: global-utilities@e1000 {
- compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
- reg = <0xe1000 0x1000>;
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
- };
rcpm: global-utilities@e2000 {
compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0";
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 51e975d..872e448 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -327,24 +327,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index 941274c..6318962 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -89,7 +89,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -99,7 +99,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -109,7 +109,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -119,7 +119,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 187676f..81bc75a 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -354,24 +354,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index 50b73e8..db92f11 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -90,7 +90,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -100,7 +100,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -110,7 +110,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -120,7 +120,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index a025208..4da49b6 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -374,76 +374,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
-
- pll2: pll2@840 {
- #clock-cells = <1>;
- reg = <0x840 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll2", "pll2-div2";
- };
-
- pll3: pll3@860 {
- #clock-cells = <1>;
- reg = <0x860 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll3", "pll3-div2";
- };
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
-
- mux4: mux4@80 {
- #clock-cells = <0>;
- reg = <0x80 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux4";
- };
-
- mux5: mux5@a0 {
- #clock-cells = <0>;
- reg = <0xa0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux5";
- };
-
- mux6: mux6@c0 {
- #clock-cells = <0>;
- reg = <0xc0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux6";
- };
-
- mux7: mux7@e0 {
- #clock-cells = <0>;
- reg = <0xe0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux7";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index d56a546..0a7c65a 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -94,7 +94,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -104,7 +104,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -114,7 +114,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -124,7 +124,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
@@ -134,7 +134,7 @@
cpu4: PowerPC,e500mc@4 {
device_type = "cpu";
reg = <4>;
- clocks = <&mux4>;
+ clocks = <&clockgen 1 4>;
next-level-cache = <&L2_4>;
fsl,portid-mapping = <0x08000000>;
L2_4: l2-cache {
@@ -144,7 +144,7 @@
cpu5: PowerPC,e500mc@5 {
device_type = "cpu";
reg = <5>;
- clocks = <&mux5>;
+ clocks = <&clockgen 1 5>;
next-level-cache = <&L2_5>;
fsl,portid-mapping = <0x04000000>;
L2_5: l2-cache {
@@ -154,7 +154,7 @@
cpu6: PowerPC,e500mc@6 {
device_type = "cpu";
reg = <6>;
- clocks = <&mux6>;
+ clocks = <&clockgen 1 6>;
next-level-cache = <&L2_6>;
fsl,portid-mapping = <0x02000000>;
L2_6: l2-cache {
@@ -164,7 +164,7 @@
cpu7: PowerPC,e500mc@7 {
device_type = "cpu";
reg = <7>;
- clocks = <&mux7>;
+ clocks = <&clockgen 1 7>;
next-level-cache = <&L2_7>;
fsl,portid-mapping = <0x01000000>;
L2_7: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index bfba0b4..2d74ea8 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -96,7 +96,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -106,7 +106,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index e2bd931..16b454b 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -319,24 +319,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index dbd5775..ed89dbb 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -102,7 +102,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -112,7 +112,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -122,7 +122,7 @@
cpu2: PowerPC,e5500@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -132,7 +132,7 @@
cpu3: PowerPC,e5500@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
index 88cd70d..5c89cfa 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -32,55 +32,16 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+};
+
clockgen: global-utilities@e1000 {
compatible = "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
#clock-cells = <2>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
- clock-output-names = "sysclk";
- };
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
- platform_pll: platform-pll@c00 {
- #clock-cells = <1>;
- reg = <0xc00 0x4>;
- compatible = "fsl,qoriq-platform-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "platform-pll", "platform-pll-div2";
- };
+ clocks = <&sysclk>;
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
index 6dfd7c5..bf649ce 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -32,38 +32,16 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+};
+
clockgen: global-utilities@e1000 {
compatible = "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
#clock-cells = <2>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock";
- clock-output-names = "sysclk";
- };
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
- platform_pll: platform-pll@c00 {
- #clock-cells = <1>;
- reg = <0xc00 0x4>;
- compatible = "fsl,qoriq-platform-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "platform-pll", "platform-pll-div2";
- };
+ clocks = <&sysclk>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index 4908af5..d552044 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -345,22 +345,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 4>;
- compatible = "fsl,core-mux-clock";
- clocks = <&pll0 0>, <&pll0 1>;
- clock-names = "pll0_0", "pll0_1";
- clock-output-names = "cmux0";
- };
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 4>;
- compatible = "fsl,core-mux-clock";
- clocks = <&pll0 0>, <&pll0 1>;
- clock-names = "pll0_0", "pll0_1";
- clock-output-names = "cmux1";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
index 9d08a36..d87ea13 100644
--- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -74,7 +74,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
#cooling-cells = <2>;
L2_1: l2-cache {
@@ -84,7 +84,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
#cooling-cells = <2>;
L2_2: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 145c7f4..315d055 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -425,50 +425,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux1";
- };
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0_0", "pll0_1", "pll0_2",
- "pll1_0", "pll1_1", "pll1_2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
index 6db0ee8..dd59e4b 100644
--- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -74,7 +74,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
#cooling-cells = <2>;
L2_1: l2-cache {
@@ -84,7 +84,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
#cooling-cells = <2>;
L2_2: l2-cache {
@@ -94,7 +94,7 @@
cpu2: PowerPC,e5500@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
#cooling-cells = <2>;
L2_3: l2-cache {
@@ -104,7 +104,7 @@
cpu3: PowerPC,e5500@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_4>;
#cooling-cells = <2>;
L2_4: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index a97296c..ecbb447 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -535,28 +535,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux1";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
index c2e5720..3f745de 100644
--- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
@@ -81,28 +81,28 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index 68c4ead..fcac734 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -950,67 +950,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
-
- pll2: pll2@840 {
- #clock-cells = <1>;
- reg = <0x840 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll2", "pll2-div2", "pll2-div4";
- };
-
- pll3: pll3@860 {
- #clock-cells = <1>;
- reg = <0x860 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll3", "pll3-div2", "pll3-div4";
- };
-
- pll4: pll4@880 {
- #clock-cells = <1>;
- reg = <0x880 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll4", "pll4-div2", "pll4-div4";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>,
- <&pll2 0>, <&pll2 1>, <&pll2 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4",
- "pll2", "pll2-div2", "pll2-div4";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>,
- <&pll2 0>, <&pll2 1>, <&pll2 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4",
- "pll2", "pll2-div2", "pll2-div4";
- clock-output-names = "cmux1";
- };
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
- <&pll4 0>, <&pll4 1>, <&pll4 2>;
- clock-names = "pll3", "pll3-div2", "pll3-div4",
- "pll4", "pll4-div2", "pll4-div4";
- clock-output-names = "cmux2";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index 038cf8f..632314c 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -90,84 +90,84 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu4: PowerPC,e6500@8 {
device_type = "cpu";
reg = <8 9>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu5: PowerPC,e6500@10 {
device_type = "cpu";
reg = <10 11>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu6: PowerPC,e6500@12 {
device_type = "cpu";
reg = <12 13>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu7: PowerPC,e6500@14 {
device_type = "cpu";
reg = <14 15>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu8: PowerPC,e6500@16 {
device_type = "cpu";
reg = <16 17>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
cpu9: PowerPC,e6500@18 {
device_type = "cpu";
reg = <18 19>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
cpu10: PowerPC,e6500@20 {
device_type = "cpu";
reg = <20 21>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
cpu11: PowerPC,e6500@22 {
device_type = "cpu";
reg = <22 23>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
--
1.7.1
next reply other threads:[~2018-10-24 2:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 2:11 andy.tang [this message]
2018-10-24 2:11 ` [PATCH 2/3 v2] clk: qoriq: remove legacy bindings and add more compatibles andy.tang
2018-10-24 2:11 ` [PATCH 3/3 v2] clk: qoriq: update clock driver andy.tang
2018-10-24 18:37 ` Scott Wood
2018-10-25 2:40 ` Andy Tang
2018-10-24 22:10 ` [PATCH 2/3 v2] clk: qoriq: remove legacy bindings and add more compatibles Rob Herring
2018-10-25 2:41 ` Andy Tang
2018-10-24 17:41 ` [PATCH 1/3 v2] powerpc/fsl: Use new clockgen binding Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181024021122.3942-1-andy.tang@nxp.com \
--to=andy.tang@nxp.com \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=mpe@ellerman.id.au \
--cc=mturquette@baylibre.com \
--cc=oss@buserror.net \
--cc=paulus@samba.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).