From: Douglas Anderson <dianders@chromium.org>
To: Sean Paul <seanpaul@chromium.org>,
Thierry Reding <thierry.reding@gmail.com>,
Sandeep Panda <spanda@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
jsanka@codeaurora.org, ryandcase@chromium.org,
Douglas Anderson <dianders@chromium.org>,
David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/6] drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
Date: Thu, 25 Oct 2018 15:21:34 -0700 [thread overview]
Message-ID: <20181025222134.174583-6-dianders@chromium.org> (raw)
In-Reply-To: <20181025222134.174583-1-dianders@chromium.org>
As far as I can tell the panel that was added in commit da50bd4258db
("drm/panel: simple: Add Innolux TV123WAM panel driver support")
wasn't actually an Innolux TV123WAM but was actually an Innolux
P120ZDG-BF1.
As far as I can tell the Innolux TV123WAM isn't a real panel and but
it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1.
Let's unmosh.
Here's my evidence:
* Searching for TV123WAM on the Internet turns up a TI panel. While
it's possible that an Innolux panel has the same model number as the
TI Panel, it seems a little doubtful. Looking up the datasheet from
the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm.
* As far as I know, the patch adding the Innolux Panel was supposed to
be for the board that's sitting in front of me as I type this
(support for that board is not yet upstream). On the back of that
panel I see Innolux P120ZDZ-EZ1 rev B1.
* Someone pointed me at a datasheet that's supposed to be for the
panel in front of me (sorry, I can't share the datasheet). That
datasheet has the string "p120zdg-bf1"
* If I search for "P120ZDG-BF1" on the Internet I get hits for panels
that are 2160x1440. They don't have datasheets, but the fact that
the resolution matches is a good sign.
In any case, let's update the name and also the physical size to match
the correct panel.
Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Sandeep Panda <spanda@codeaurora.org>
---
Changes in v2: None
drivers/gpu/drm/panel/panel-simple.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 88592f9a0018..a04ffb3b2174 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1373,7 +1373,7 @@ static const struct panel_desc innolux_n156bge_l21 = {
},
};
-static const struct drm_display_mode innolux_tv123wam_mode = {
+static const struct drm_display_mode innolux_p120zdg_bf1_mode = {
.clock = 206016,
.hdisplay = 2160,
.hsync_start = 2160 + 48,
@@ -1387,13 +1387,13 @@ static const struct drm_display_mode innolux_tv123wam_mode = {
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
};
-static const struct panel_desc innolux_tv123wam = {
- .modes = &innolux_tv123wam_mode,
+static const struct panel_desc innolux_p120zdg_bf1 = {
+ .modes = &innolux_p120zdg_bf1_mode,
.num_modes = 1,
.bpc = 8,
.size = {
- .width = 259,
- .height = 173,
+ .width = 254,
+ .height = 169,
},
.delay = {
.hpd_absent_delay = 200,
@@ -2456,8 +2456,8 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "innolux,n156bge-l21",
.data = &innolux_n156bge_l21,
}, {
- .compatible = "innolux,tv123wam",
- .data = &innolux_tv123wam,
+ .compatible = "innolux,p120zdg-bf1",
+ .data = &innolux_p120zdg_bf1,
}, {
.compatible = "innolux,zj070na-01p",
.data = &innolux_zj070na_01p,
--
2.19.1.568.g152ad8e336-goog
next prev parent reply other threads:[~2018-10-25 22:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-25 22:21 [PATCH v2 1/6] dt-bindings: drm/panel: simple: Add no-hpd property Douglas Anderson
2018-10-25 22:21 ` [PATCH v2 2/6] drm/panel: simple: Support panels with HPD where HPD isn't connected Douglas Anderson
2018-10-26 14:41 ` Sean Paul
2018-10-25 22:21 ` [PATCH v2 3/6] drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM Douglas Anderson
2018-10-26 14:41 ` Sean Paul
2018-10-25 22:21 ` [PATCH v2 4/6] drm/bridge: ti-sn65dsi86: Remove the mystery delay Douglas Anderson
2018-10-29 9:03 ` Andrzej Hajda
2018-10-25 22:21 ` [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 Douglas Anderson
2018-10-26 14:43 ` Sean Paul
2018-10-26 14:46 ` Sean Paul
2018-10-26 15:01 ` Doug Anderson
2018-10-29 9:10 ` Andrzej Hajda
2018-10-25 22:21 ` Douglas Anderson [this message]
2018-10-26 14:44 ` [PATCH v2 6/6] " Sean Paul
2018-10-29 16:16 ` [PATCH v2 1/6] dt-bindings: drm/panel: simple: Add no-hpd property Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181025222134.174583-6-dianders@chromium.org \
--to=dianders@chromium.org \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=jsanka@codeaurora.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ryandcase@chromium.org \
--cc=seanpaul@chromium.org \
--cc=spanda@codeaurora.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).