linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nava kishore Manne <nava.manne@xilinx.com>
To: <p.zabel@pengutronix.de>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <michal.simek@xilinx.com>,
	<rajanv@xilinx.com>, <jollys@xilinx.com>, <nava.manne@xilinx.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <chinnikishore369@gmail.com>
Subject: [PATCH v2 3/3] reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.
Date: Fri, 26 Oct 2018 17:54:24 +0530	[thread overview]
Message-ID: <20181026122424.30831-4-nava.manne@xilinx.com> (raw)
In-Reply-To: <20181026122424.30831-1-nava.manne@xilinx.com>

Add a reset controller driver for Xilinx Zynq UltraScale+ MPSoC.
The zynqmp reset-controller has the ability to reset lines
connected to different blocks and peripheral in the Soc.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v2:
		-Fixed some minor coding issues as suggested
		 by philipp.

Changes for v1:
		-None.

Changes for RFC-V3:
		-None.

Changes for RFC-V2:
		-Moved eemi_ops into a priv struct as suggested
		 by philipp.

 drivers/reset/Makefile       |   1 +
 drivers/reset/reset-zynqmp.c | 114 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 115 insertions(+)
 create mode 100644 drivers/reset/reset-zynqmp.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 4243c38..eb315d1 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -24,4 +24,5 @@ obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
+obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o
 
diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
new file mode 100644
index 0000000..cff63d9
--- /dev/null
+++ b/drivers/reset/reset-zynqmp.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Xilinx, Inc.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+
+#define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START - 2)
+#define ZYNQMP_RESET_ID (ZYNQMP_PM_RESET_START + 1)
+
+struct zynqmp_reset_data {
+	struct reset_controller_dev rcdev;
+	const struct zynqmp_eemi_ops *eemi_ops;
+};
+
+static inline struct zynqmp_reset_data *
+to_zynqmp_reset_data(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct zynqmp_reset_data, rcdev);
+}
+
+static int zynqmp_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id,
+					    PM_RESET_ACTION_ASSERT);
+}
+
+static int zynqmp_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id,
+					    PM_RESET_ACTION_RELEASE);
+}
+
+static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+	int val, err;
+
+	err = priv->eemi_ops->reset_get_status(ZYNQMP_RESET_ID + id, &val);
+	if (!err)
+		return err;
+
+	return val;
+}
+
+static int zynqmp_reset_reset(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id,
+					    PM_RESET_ACTION_PULSE);
+}
+
+static struct reset_control_ops zynqmp_reset_ops = {
+	.reset = zynqmp_reset_reset,
+	.assert = zynqmp_reset_assert,
+	.deassert = zynqmp_reset_deassert,
+	.status = zynqmp_reset_status,
+};
+
+static int zynqmp_reset_probe(struct platform_device *pdev)
+{
+	struct zynqmp_reset_data *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->eemi_ops = zynqmp_pm_get_eemi_ops();
+	if (!priv->eemi_ops)
+		return -ENXIO;
+
+	priv->rcdev.ops = &zynqmp_reset_ops;
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.of_node = pdev->dev.of_node;
+	priv->rcdev.nr_resets = ZYNQMP_NR_RESETS;
+
+	return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
+}
+
+static const struct of_device_id zynqmp_reset_dt_ids[] = {
+	{ .compatible = "xlnx,zynqmp-reset", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver zynqmp_reset_driver = {
+	.probe	= zynqmp_reset_probe,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= zynqmp_reset_dt_ids,
+	},
+};
+
+static int __init zynqmp_reset_init(void)
+{
+	return platform_driver_register(&zynqmp_reset_driver);
+}
+
+arch_initcall(zynqmp_reset_init);
-- 
2.7.4


  parent reply	other threads:[~2018-10-25 12:26 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-26 12:24 [PATCH v2 0/3] Add reset driver support for ZynqMP Nava kishore Manne
2018-10-26 12:24 ` [PATCH v2 1/3] firmware: xilinx: Add reset API's Nava kishore Manne
2018-10-25 20:43   ` Vesa Jääskeläinen
2018-10-26 12:24 ` [PATCH v2 2/3] dt-bindings: reset: Add bindings for ZynqMP reset driver Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne [this message]
2018-10-25 20:53   ` [PATCH v2 3/3] reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller Vesa Jääskeläinen
2018-10-26 11:08   ` Philipp Zabel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181026122424.30831-4-nava.manne@xilinx.com \
    --to=nava.manne@xilinx.com \
    --cc=chinnikishore369@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jollys@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michal.simek@xilinx.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rajanv@xilinx.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v2 3/3] reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).