linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/6] dt-bindings: drm/panel: simple: Add no-hpd property
@ 2018-10-25 22:21 Douglas Anderson
  2018-10-25 22:21 ` [PATCH v2 2/6] drm/panel: simple: Support panels with HPD where HPD isn't connected Douglas Anderson
                   ` (5 more replies)
  0 siblings, 6 replies; 15+ messages in thread
From: Douglas Anderson @ 2018-10-25 22:21 UTC (permalink / raw)
  To: Sean Paul, Thierry Reding, Sandeep Panda
  Cc: linux-arm-msm, Laurent Pinchart, jsanka, ryandcase,
	Douglas Anderson, devicetree, linux-kernel, dri-devel,
	Rob Herring, David Airlie, Mark Rutland

Some eDP panels that are designed to be always connected to a board
use their HPD signal to signal that they've finished powering on and
they're ready to be talked to.

However, for various reasons it's possible that the HPD signal from
the panel isn't actually hooked up.  In the case where the HPD isn't
hooked up you can look at the timing diagram on the panel datasheet
and insert a delay for the maximum amount of time that the HPD might
take to come up.

Let's add a property in the device tree for this concept.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Changes in v2: None

 .../devicetree/bindings/display/panel/simple-panel.txt         | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
index 45a457ad38f0..b2b872c710f2 100644
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
@@ -11,6 +11,9 @@ Optional properties:
 - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
 - enable-gpios: GPIO pin to enable or disable the panel
 - backlight: phandle of the backlight device attached to the panel
+- no-hpd: This panel is supposed to communicate that it's ready via HPD
+  (hot plug detect) signal, but the signal isn't hooked up so we should
+  hardcode the max delay from the panel spec when powering up the panel.
 
 Example:
 
-- 
2.19.1.568.g152ad8e336-goog


^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2018-10-29 16:16 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-25 22:21 [PATCH v2 1/6] dt-bindings: drm/panel: simple: Add no-hpd property Douglas Anderson
2018-10-25 22:21 ` [PATCH v2 2/6] drm/panel: simple: Support panels with HPD where HPD isn't connected Douglas Anderson
2018-10-26 14:41   ` Sean Paul
2018-10-25 22:21 ` [PATCH v2 3/6] drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM Douglas Anderson
2018-10-26 14:41   ` Sean Paul
2018-10-25 22:21 ` [PATCH v2 4/6] drm/bridge: ti-sn65dsi86: Remove the mystery delay Douglas Anderson
2018-10-29  9:03   ` Andrzej Hajda
2018-10-25 22:21 ` [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 Douglas Anderson
2018-10-26 14:43   ` Sean Paul
2018-10-26 14:46     ` Sean Paul
2018-10-26 15:01       ` Doug Anderson
2018-10-29  9:10   ` Andrzej Hajda
2018-10-25 22:21 ` [PATCH v2 6/6] " Douglas Anderson
2018-10-26 14:44   ` Sean Paul
2018-10-29 16:16 ` [PATCH v2 1/6] dt-bindings: drm/panel: simple: Add no-hpd property Sean Paul

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).