On Thu, Oct 25, 2018 at 01:23:08PM +0000, Pascal PAILLET-LME wrote:

> I have reworked the code so that we don't touch any more to the init_data.
> the new loop to register the regulators is below:
> 
>      for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) {
>          ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i],
>                           regul);
>          if (ret < 0)
>              return ret;
>          regul++;
>      }
> 
> Each regulator is registered, even is it is not described in the 
> device-tree.

Looks good.