[PATCH 01/10] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs

[Yu Chen <chenyu56@huawei.com>]

This patch adds binding descriptions to support the dwc3 controller
on HiSilicon SoCs and boards like the HiKey960.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 .../devicetree/bindings/usb/dwc3-hisi.txt          | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/dwc3-hisi.txt

diff --git a/Documentation/devicetree/bindings/usb/dwc3-hisi.txt b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
new file mode 100644
index 000000000000..e715e7b1c324
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
@@ -0,0 +1,53 @@
+HiSilicon DWC3 USB SoC controller
+
+This file documents the parameters for the dwc3-hisi driver.
+
+Required properties:
+- compatible:	should be "hisilicon,hi3660-dwc3"
+- clocks:	A list of phandle + clock-specifier pairs for the
+		clocks listed in clock-names
+- clock-names:	Specify clock names
+- resets:	list of phandle and reset specifier pairs.
+
+Sub-nodes:
+The dwc3 core should be added as subnode to HiSilicon DWC3 as shown in the
+example below. The DT binding details of dwc3 can be found in:
+Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+	usb3: hisi_dwc3 {
+		compatible = "hisilicon,hi3660-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+			 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+		clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+		assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+		assigned-clock-rates = <229000000>;
+		resets = <&crg_rst 0x90 8>,
+			 <&crg_rst 0x90 7>,
+			 <&crg_rst 0x90 6>,
+			 <&crg_rst 0x90 5>;
+
+		dwc3: dwc3@ff100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff100000 0x0 0x100000>;
+			interrupts = <0 159 4>, <0 161 4>;
+			phys = <&usb_phy>;
+			phy-names = "usb3-phy";
+			dr_mode = "otg";
+			maximum-speed = "super-speed";
+			phy_type = "utmi";
+			snps,dis-del-phy-power-chg-quirk;
+			snps,lfps_filter_quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,tx_de_emphasis_quirk;
+			snps,tx_de_emphasis = <1>;
+			snps,dis_enblslpm_quirk;
+			snps,gctl-reset-quirk;
+			extcon = <&hisi_hikey_usb>;
+		};
+	};
-- 
2.15.0-rc2