linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Stephen Boyd <swboyd@chromium.org>,
	Doug Anderson <dianders@chromium.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 4.4 16/32] pinctrl: qcom: spmi-mpp: Fix drive strength setting
Date: Wed, 31 Oct 2018 19:11:21 -0400	[thread overview]
Message-ID: <20181031231137.29429-16-sashal@kernel.org> (raw)
In-Reply-To: <20181031231137.29429-1-sashal@kernel.org>

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ]

It looks like we parse the drive strength setting here, but never
actually write it into the hardware to update it. Parse the setting and
then write it at the end of the pinconf setting function so that it
actually sticks in the hardware.

Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 0643abfd8a50..8301e600e7a8 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -459,7 +459,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			pad->dtest = arg;
 			break;
 		case PIN_CONFIG_DRIVE_STRENGTH:
-			arg = pad->drive_strength;
+			pad->drive_strength = arg;
 			break;
 		case PMIC_MPP_CONF_AMUX_ROUTE:
 			if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4)
@@ -503,6 +503,10 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
 	if (ret < 0)
 		return ret;
 
+	ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength);
+	if (ret < 0)
+		return ret;
+
 	val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
 
 	return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);
-- 
2.17.1


  parent reply	other threads:[~2018-10-31 23:16 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-31 23:11 [PATCH AUTOSEL 4.4 01/32] locking/lockdep: Fix debug_locks off performance problem Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 02/32] ataflop: fix error handling during setup Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 03/32] swim: fix cleanup on setup error Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 04/32] tun: Consistently configure generic netdev params via rtnetlink Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 05/32] perf tools: Free temporary 'sys' string in read_event_files() Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 06/32] perf tools: Cleanup trace-event-info 'tdata' leak Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 07/32] cpupower: Fix coredump on VMWare Sasha Levin
2018-11-12 10:29   ` Rafael David Tinoco
2018-11-12 13:32     ` Greg KH
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 08/32] mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01 Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 09/32] x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 10/32] regulator: fixed: Default enable high on DT regulators Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 11/32] Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 12/32] x86: boot: Fix EFI stub alignment Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 13/32] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 14/32] kprobes: Return error if we fail to reuse kprobe instead of BUG_ON() Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 15/32] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers Sasha Levin
2018-10-31 23:11 ` Sasha Levin [this message]
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 17/32] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 18/32] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() " Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 19/32] ath10k: schedule hardware restart if WMI command times out Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 20/32] scsi: esp_scsi: Track residual for PIO transfers Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 21/32] scsi: megaraid_sas: fix a missing-check bug Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 22/32] tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 23/32] Drivers: hv: kvp: Fix two "this statement may fall through" warnings Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 24/32] ext4: fix argument checking in EXT4_IOC_MOVE_EXT Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 25/32] MD: fix invalid stored role for a disk Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 26/32] usb: chipidea: Prevent unbalanced IRQ disable Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 27/32] driver/dma/ioat: Call del_timer_sync() without holding prep_lock Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 28/32] uio: ensure class is registered before devices Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 29/32] scsi: lpfc: Correct soft lockup when running mds diagnostics Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 30/32] signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 31/32] dmaengine: dma-jz4780: Return error if not probed from DT Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 32/32] ALSA: hda: Check the non-cached stream buffers more explicitly Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181031231137.29429-16-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dianders@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).