linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kees Cook <keescook@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>,
	Joel Fernandes <joel@joelfernandes.org>,
	Anton Vorontsov <anton@enomsg.org>,
	Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>
Subject: [PATCH 4/8] pstore/ram: Add kern-doc for struct persistent_ram_zone
Date: Thu,  1 Nov 2018 16:51:56 -0700	[thread overview]
Message-ID: <20181101235200.28584-5-keescook@chromium.org> (raw)
In-Reply-To: <20181101235200.28584-1-keescook@chromium.org>

The struct persistent_ram_zone wasn't well documented. This adds kern-doc
for it.

Signed-off-by: Kees Cook <keescook@chromium.org>
---
 fs/pstore/ram_core.c       | 10 +++++++++
 include/linux/pstore_ram.h | 46 +++++++++++++++++++++++++++++++++++---
 2 files changed, 53 insertions(+), 3 deletions(-)

diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c
index d5bf9be82545..1cda5922b4b4 100644
--- a/fs/pstore/ram_core.c
+++ b/fs/pstore/ram_core.c
@@ -29,6 +29,16 @@
 #include <linux/vmalloc.h>
 #include <asm/page.h>
 
+/**
+ * struct persistent_ram_buffer - persistent circular RAM buffer
+ *
+ * @sig:
+ *	signature to indicate header (PERSISTENT_RAM_SIG xor PRZ-type value)
+ * @start:
+ *	offset into @data where the beginning of the stored bytes begin
+ * @size:
+ *	number of valid bytes stored in @data
+ */
 struct persistent_ram_buffer {
 	uint32_t    sig;
 	atomic_t    start;
diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h
index 6e94980357d2..5d10ad51c1c4 100644
--- a/include/linux/pstore_ram.h
+++ b/include/linux/pstore_ram.h
@@ -30,6 +30,10 @@
  * PRZ_FLAG_NO_LOCK is used. For all other cases, locking is required.
  */
 #define PRZ_FLAG_NO_LOCK	BIT(0)
+/*
+ * If a PRZ should only have a single-boot lifetime, this marks it as
+ * getting wiped after its contents get copied out after boot.
+ */
 #define PRZ_FLAG_ZAP_OLD	BIT(1)
 
 struct persistent_ram_buffer;
@@ -43,17 +47,53 @@ struct persistent_ram_ecc_info {
 	uint16_t *par;
 };
 
+/**
+ * struct persistent_ram_zone - Details of a persistent RAM zone (PRZ)
+ *                              used as a pstore backend
+ *
+ * @paddr:	physical address of the mapped RAM area
+ * @size:	size of mapping
+ * @label:	unique name of this PRZ
+ * @flags:	holds PRZ_FLAGS_* bits
+ *
+ * @buffer_lock:
+ *	locks access to @buffer "size" bytes and "start" offset
+ * @buffer:
+ *	pointer to actual RAM area managed by this PRZ
+ * @buffer_size:
+ *	bytes in @buffer->data (not including any trailing ECC bytes)
+ *
+ * @par_buffer:
+ *	pointer into @buffer->data containing ECC bytes for @buffer->data
+ * @par_header:
+ *	pointer into @buffer->data containing ECC bytes for @buffer header
+ *	(i.e. all fields up to @data)
+ * @rs_decoder:
+ *	RSLIB instance for doing ECC calculations
+ * @corrected_bytes:
+ *	ECC corrected bytes accounting since boot
+ * @bad_blocks:
+ *	ECC uncorrectable bytes accounting since boot
+ * @ecc_info:
+ *	ECC configuration details
+ *
+ * @old_log:
+ *	saved copy of @buffer->data prior to most recent wipe
+ * @old_log_size:
+ *	bytes contained in @old_log
+ *
+ */
 struct persistent_ram_zone {
 	phys_addr_t paddr;
 	size_t size;
 	void *vaddr;
 	char *label;
-	struct persistent_ram_buffer *buffer;
-	size_t buffer_size;
 	u32 flags;
+
 	raw_spinlock_t buffer_lock;
+	struct persistent_ram_buffer *buffer;
+	size_t buffer_size;
 
-	/* ECC correction */
 	char *par_buffer;
 	char *par_header;
 	struct rs_control *rs_decoder;
-- 
2.17.1


  parent reply	other threads:[~2018-11-01 23:52 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 23:51 [PATCH 0/8] pstore improvements (pstore-next) Kees Cook
2018-11-01 23:51 ` [PATCH linux-next 1/8] pstore/ram: Standardize module name in ramoops Kees Cook
2018-11-01 23:51 ` [PATCH 2/8] pstore: Do not use crash buffer for decompression Kees Cook
2018-11-02 18:24   ` Joel Fernandes
2018-11-14  7:56     ` Kees Cook
2018-11-20 21:43       ` Joel Fernandes
2018-11-29 22:06       ` Kees Cook
2018-11-30  2:26         ` Joel Fernandes
2018-11-01 23:51 ` [PATCH 3/8] pstore/ram: Report backend assignments with finer granularity Kees Cook
2018-11-01 23:51 ` Kees Cook [this message]
2018-11-01 23:51 ` [PATCH 5/8] pstore: Improve and update some comments and status output Kees Cook
2018-11-01 23:51 ` [PATCH 6/8] pstore: Replace open-coded << with BIT() Kees Cook
2018-11-01 23:51 ` [PATCH 7/8] pstore: Remove needless lock during console writes Kees Cook
2018-11-02 18:32   ` Joel Fernandes
2018-11-02 20:40     ` Kees Cook
2018-11-02 21:50       ` Joel Fernandes
2018-11-01 23:52 ` [PATCH 8/8] pstore/ram: Correctly calculate usable PRZ bytes Kees Cook
2018-11-02 18:01   ` Joel Fernandes
2018-11-02 20:00     ` Kees Cook
2018-11-05  4:42       ` Joel Fernandes
2018-11-05 17:04         ` Kees Cook
2018-11-06  4:42           ` Joel Fernandes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101235200.28584-5-keescook@chromium.org \
    --to=keescook@chromium.org \
    --cc=anton@enomsg.org \
    --cc=ccross@android.com \
    --cc=joel@joelfernandes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).