On Mon, Oct 29, 2018 at 08:38:14PM +0530, Jagan Teki wrote: > On Mon, Oct 29, 2018 at 2:39 PM Maxime Ripard wrote: > > > > On Thu, Oct 25, 2018 at 09:21:31PM +0530, Jagan Teki wrote: > > > On Wed, Oct 24, 2018 at 11:43 PM Maxime Ripard > > > wrote: > > > > > > > > On Tue, Oct 23, 2018 at 09:20:32PM +0530, Jagan Teki wrote: > > > > > A64 manual say PLL_MIPI rates are 500MHz to 1.4GHz, but > > > > > using minimum 500MHz can't release the clock and which > > > > > is not working. > > > > > > > > > > So use working minimum rate as 300MHz which is tested on > > > > > Bananapi DSI panel. > > > > > > > > I'm not quite sure what you mean by that. What do you mean by "500MHz > > > > can't release the clock"? Why would 300MHz work better then? Should be > > > > avoid reaching 500MHz if it's a frequency in the valid range? > > > > > > PLL_MIPI can't be work with existing nkm where rate set to 270MHz > > > (from PLL_VIDEO) > > > /*** round rate call in ccu_nkm.c */ > > > [ 2.408356] round: rate = 118800000 > > > [ 2.408359] round: parent_rate = 158740688 > > > [ 2.408417] round: rate = 148500000 > > > [ 2.408420] round: parent_rate = 158740688 > > > [ 2.408439] round: rate = 178200000 > > > [ 2.408441] round: parent_rate = 158740688 > > > [ 2.408460] round: rate = 205615384 > > > [ 2.408462] round: parent_rate = 158740688 > > > [ 2.408481] round: rate = 237600000 > > > [ 2.408483] round: parent_rate = 158740688 > > > [ 2.408502] round: rate = 270000000 > > > [ 2.408504] round: parent_rate = 158740688 > > > [ 2.408523] round: rate = 118800000 > > > [ 2.408525] round: parent_rate = 158740560 > > > [ 2.408544] round: rate = 148500000 > > > [ 2.408546] round: parent_rate = 158740560 > > > [ 2.408565] round: rate = 178200000 > > > [ 2.408567] round: parent_rate = 158740560 > > > [ 2.408586] round: rate = 205615384 > > > [ 2.408588] round: parent_rate = 158740560 > > > [ 2.408607] round: rate = 237600000 > > > [ 2.408609] round: parent_rate = 158740560 > > > [ 2.408627] round: rate = 270000000 > > > [ 2.408630] round: parent_rate = 158740560 > > > [ 2.408648] round: rate = 270000000 > > > [ 2.408651] round: parent_rate = 158740640 > > > [ 2.408670] round: rate = 270000000 > > > [ 2.408672] round: parent_rate = 158740704 > > > > > > /** set rate call in ccu_nkm **/ > > > [ 2.408685] set: rate = 270000000 > > > [ 2.408688] set: parent_rate = 297000000 > > > > > > By using min and max rate as per A64 manual page 94 range of PLL can > > > be 500MHz~1.4GHz getting 1,2,1 nkm dividers which can't be work. > > > [ 2.423589] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000 > > > [ 2.423643] ideal = 220000000, rounded = 0 > > > [ 2.423647] ideal = 275000000, rounded = 0 > > > [ 2.423651] ideal = 330000000, rounded = 0 > > > [ 2.423692] ideal = 385000000, rounded = 384000000 > > > [ 2.423732] ideal = 440000000, rounded = 440000000 > > > [ 2.423736] sun4i_dclk_round_rate: div = 8 rate = 55000000 > > > [ 2.423740] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000 > > > [ 2.423744] ideal = 220000000, rounded = 0 > > > [ 2.423748] ideal = 275000000, rounded = 0 > > > [ 2.423751] ideal = 330000000, rounded = 0 > > > [ 2.423791] ideal = 385000000, rounded = 384000000 > > > [ 2.423831] ideal = 440000000, rounded = 440000000 > > > [ 2.423834] sun4i_dclk_round_rate: div = 8 rate = 55000000 > > > [ 2.423957] sun4i_dclk_recalc_rate: val = 1, rate = 440000000 > > > [ 2.423961] sun4i_dclk_recalc_rate: val = 1, rate = 440000000 > > > [ 2.424378] ccu_nkm_set_rate: rate = 440000000, parent_rate = 220000000 > > > [ 2.424381] ccu_nkm_set_rate: _nkm.n = 1 > > > [ 2.424383] ccu_nkm_set_rate: _nkm.k = 2 > > > [ 2.424385] ccu_nkm_set_rate: _nkm.m = 1 > > > [ 2.424725] sun4i_dclk_set_rate div 8 > > > [ 2.424732] sun4i_dclk_recalc_rate: val = 8, rate = 55000000 > > > [ 2.561271] usb 3-1: new high-speed USB device number 2 using ehci-platform > > > [ 2.718486] hub 3-1:1.0: USB hub found > > > [ 2.718606] hub 3-1:1.0: 4 ports detected > > > [ 3.437263] ------------[ cut here ]------------ > > > [ 3.437270] [CRTC:36:crtc-0] vblank wait timed out > > > > > > So, lowering the min rate by 300MHz seems working with bounded nkm > > > dividers 5, 2, 9. Tested on two different panels. > > > > > > [ 2.415773] [drm] No driver support for vblank timestamp query. > > > [ 2.424116] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000 > > > [ 2.424172] ideal = 220000000, rounded = 0 > > > [ 2.424176] ideal = 275000000, rounded = 0 > > > [ 2.424194] ccu_nkm_round_rate: rate = 330000000 > > > [ 2.424197] ideal = 330000000, rounded = 330000000 > > > [ 2.424201] sun4i_dclk_round_rate: div = 6 rate = 55000000 > > > [ 2.424205] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000 > > > [ 2.424209] ideal = 220000000, rounded = 0 > > > [ 2.424213] ideal = 275000000, rounded = 0 > > > [ 2.424230] ccu_nkm_round_rate: rate = 330000000 > > > [ 2.424233] ideal = 330000000, rounded = 330000000 > > > [ 2.424236] sun4i_dclk_round_rate: div = 6 rate = 55000000 > > > [ 2.424253] ccu_nkm_round_rate: rate = 330000000 > > > [ 2.424270] ccu_nkm_round_rate: rate = 330000000 > > > [ 2.424278] sun4i_dclk_recalc_rate: val = 1, rate = 330000000 > > > [ 2.424281] sun4i_dclk_recalc_rate: val = 1, rate = 330000000 > > > [ 2.424306] ccu_nkm_set_rate: rate = 330000000, parent_rate = 297000000 > > > [ 2.424309] ccu_nkm_set_rate: _nkm.n = 5 > > > [ 2.424311] ccu_nkm_set_rate: _nkm.k = 2 > > > [ 2.424313] ccu_nkm_set_rate: _nkm.m = 9 > > > [ 2.424661] sun4i_dclk_set_rate div 6 > > > [ 2.424668] sun4i_dclk_recalc_rate: val = 6, rate = 55000000 > > > > > > Note: BPI-M64-bsp is setting the rate directly to 180MHz with 297MHz > > > parent with resulting dividers as 1, 2, 5. ans we can't produce this > > > 180MHz rate with dclk_round_rate and ccu_nkm. > > > > I'm still not quite sure what you mean by "500MHz can't release the > > clock". > > > > From what you're saying, this seems to be related to the boundaries of > > the dividers rather than the rate itself. > > Yes, with 500MHz rate the boundaries of the dividers never release > hence it hangs during set_rate and finally after sometime it trigger > vblank timeout. can't release here means the same, may be I would > confused, sorry for that. I'm sorry, but I still don't get what you mean by release here. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com