linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eduardo Valentin <edubezval@gmail.com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Zhang Rui <rui.zhang@intel.com>,
	Amit kucheria <amit.kucheria@linaro.org>,
	Eric Anholt <eric@anholt.net>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	Markus Mayer <mmayer@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com,
	Heiko Stuebner <heiko@sntech.de>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Keerthy <j-keerthy@ti.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Jun Nie <jun.nie@linaro.org>, Baoyou Xie <baoyou.xie@linaro.org>,
	Shawn Guo <shawnguo@kernel.org>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 00/17] thermal: enable+check sensor after its setup is finished
Date: Mon, 5 Nov 2018 16:46:46 -0800	[thread overview]
Message-ID: <20181106004645.GB6086@localhost.localdomain> (raw)
In-Reply-To: <ba5bc790-6809-e0e3-58fb-757c8c617181@samsung.com>

Hey,

On Mon, Nov 05, 2018 at 05:35:55PM +0100, Bartlomiej Zolnierkiewicz wrote:
> 
> On 11/05/2018 04:04 AM, Zhang Rui wrote:
> > Hi, Bartlomiej,
> 
> Hi Rui,
> 
> > Interesting, I'm about to bring this issue to Linux Plumber Conference
> > this year for discussion, and I'm also proposing a solution to fix the
> > issues, but only with thermal core part finished yet.
> > can you please take a look at it?
> > https://patchwork.kernel.org/project/linux-pm/list/?series=38181
> 
> Thank you for the patches but they seem to be far from being
> a complete solution for issues fixed by my patchset. Even
> thermal core part is not finished yet as it doesn't provide
> a way to register disabled sensors for DT thermal drivers (only
> for platform ones)..
> 
> Why not simply apply my patchset now and incrementally work
> on top of it to implement fixes for issues your patchset is
> addressing?
> 
> My patchset may not be a perfect solution but IMO it is good
> enough and it has been practically ready since v1 posted in
> April (v2 fixes all issues requested by Eduardo's review from
> September)..

Rui, I agree with Bartlomiej here. I propose to create
a topic branch with both series, Bartlomiej's then yours. 

Feels to me that this is a wider change across multiple drivers, 
and across driver types, platform and of- based, so might be
better to avoid breakage.



> 
> > thanks,
> > rui
> > 
> > On 三, 2018-10-17 at 17:52 +0200, Bartlomiej Zolnierkiewicz wrote:
> >> Hi,
> >>
> >> [devm]_thermal_zone_of_sensor_register() is used to register
> >> thermal sensor by thermal drivers using DeviceTree. Besides
> >> registering sensor this function also immediately:
> >>
> >> - enables it:
> >>
> >>   tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED)
> >>   (->set_mode is set to of_thermal_set_mode() in of-thermal.c)
> >>
> >> - checks it (indirectly by using of_thermal_set_mode()):
> >>
> >>   thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
> >>   (which in turn ends up using ->get_temp method).
> >>
> >> For many DT thermal drivers this causes a problem because:
> >>
> >> - [devm]_thermal_zone_of_sensor_register() need to be called in
> >>   order to obtain data about thermal trips which are then used to
> >>   finish hardware sensor setup (only after which ->get_temp can
> >>   be used)
> >>
> >> There is also related issue for DT thermal drivers that support
> >> IRQ (i.e. exynos and rockchip ones):
> >>
> >> - sensor hardware should be enabled only after IRQ handler is
> >>   requested (because otherwise we might get IRQs that we can't
> >>   handle)
> >>
> >> - IRQ handler needs tzd structure which is obtained from
> >>   [devm_]thermal_zone_of_sensor_register()
> >>
> >> - after [devm_]thermal_zone_of_sensor_register() call core
> >>   thermal code assumes that sensor is enabled and ready to use
> >>   (i.e. that IRQ handler has been requested and sensor hardware
> >>   has been enabled)
> >>
> >> In order to fix all abovementioned issues sensor registration,
> >> enable and check operations are separated in the core DT thermal
> >> code and corresponding DT thermal drivers are modified to do sensor
> >> setup correctly.
> >>
> >> Changes since v1:
> >> - rebased on the current -next kernel (next-20181015)
> >> - enhanced patch descriptions and cover letter
> >> - renamed thermal_zone_device_toggler() to thermal_zone_set_mode()
> >> - converted thermal_zone_set_mode() to use enum thermal_device_mode
> >> - added CONFIG_THERMAL=n stubs for thermal_zone_set_mode() and
> >>   thermal_zone_device_check()
> >> - fixed uses of [devm]_thermal_zone_of_sensor_register() outside of
> >>   drivers/thermal/
> >> - changed ordering between patch #2 and #3 in order to add all
> >>   needed core helpers first before fixing sensor setup code
> >> - changed ordering between patch #3 and #4 in order to simplify them
> >> - renamed patch #3 to "thermal: separate sensor enable and check
> >>   operations"
> >> - renamed patch #4 to "thermal: separate sensor registration and
> >>   enable+check operations"
> >>
> >> Best regards,
> >> --
> >> Bartlomiej Zolnierkiewicz
> >> Samsung R&D Institute Poland
> >> Samsung Electronics
> >>
> >>
> >> Bartlomiej Zolnierkiewicz (17):
> >>   thermal: add thermal_zone_set_mode() helper
> >>   thermal: add thermal_zone_device_check() helper
> >>   thermal: separate sensor enable and check operations
> >>   thermal: separate sensor registration and enable+check operations
> >>   thermal: bcm2835: enable+check sensor after its setup is finished
> >>   thermal: brcmstb: enable+check sensor after its setup is finished
> >>   thermal: hisi_thermal: enable+check sensor after its setup is
> >> finished
> >>   thermal: qcom: tsens: enable+check sensor after its setup is
> >> finished
> >>   thermal: qoriq: enable+check sensor after its setup is finished
> >>   thermal: rcar_gen3_thermal: enable+check sensor after its setup is
> >>     finished
> >>   thermal: rockchip_thermal: enable+check sensor after its setup is
> >>     finished
> >>   thermal: exynos: enable+check sensor after its setup is finished
> >>   thermal: tegra: enable+check sensor after its setup is finished
> >>   thermal: ti-soc-thermal: enable+check sensor after its setup is
> >>     finished
> >>   thermal: uniphier: enable+check sensor after its setup is finished
> >>   thermal: zx2967: enable+check sensor after its setup is finished
> >>   thermal: warn on attempts to read temperature on disabled sensors
> >>
> >>  drivers/acpi/thermal.c                             |  5 +--
> >>  drivers/ata/ahci_imx.c                             | 10 ++++--
> >>  drivers/hwmon/hwmon.c                              |  5 +++
> >>  drivers/hwmon/ntc_thermistor.c                     |  4 +++
> >>  drivers/hwmon/scpi-hwmon.c                         |  4 +++
> >>  drivers/iio/adc/sun4i-gpadc-iio.c                  |  5 +++
> >>  drivers/input/touchscreen/sun4i-ts.c               |  8 ++++-
> >>  drivers/net/ethernet/mellanox/mlxsw/core_thermal.c |  1 -
> >>  drivers/platform/x86/acerhdf.c                     |  6 +++-
> >>  drivers/regulator/max8973-regulator.c              |  6 ++--
> >>  drivers/thermal/armada_thermal.c                   |  3 ++
> >>  drivers/thermal/broadcom/bcm2835_thermal.c         |  3 ++
> >>  drivers/thermal/broadcom/brcmstb_thermal.c         |  3 ++
> >>  drivers/thermal/broadcom/ns-thermal.c              |  3 ++
> >>  drivers/thermal/da9062-thermal.c                   |  7 ++--
> >>  drivers/thermal/db8500_thermal.c                   |  5 ++-
> >>  drivers/thermal/hisi_thermal.c                     | 22 ++++------
> >> ---
> >>  drivers/thermal/imx_thermal.c                      |  3 +-
> >>  drivers/thermal/int340x_thermal/int3400_thermal.c  |  1 +
> >>  drivers/thermal/intel_bxt_pmic_thermal.c           |  3 +-
> >>  drivers/thermal/intel_soc_dts_iosf.c               |  3 +-
> >>  drivers/thermal/max77620_thermal.c                 |  6 ++--
> >>  drivers/thermal/mtk_thermal.c                      |  3 ++
> >>  drivers/thermal/of-thermal.c                       |  6 ++--
> >>  drivers/thermal/qcom-spmi-temp-alarm.c             |  5 ++-
> >>  drivers/thermal/qcom/tsens.c                       |  6 ++++
> >>  drivers/thermal/qoriq_thermal.c                    |  3 ++
> >>  drivers/thermal/rcar_gen3_thermal.c                |  7 ++--
> >>  drivers/thermal/rcar_thermal.c                     |  7 ++--
> >>  drivers/thermal/rockchip_thermal.c                 | 38 +++++++++++-
> >> ----------
> >>  drivers/thermal/samsung/exynos_tmu.c               |  7 +++-
> >>  drivers/thermal/st/st_thermal_memmap.c             |  3 +-
> >>  drivers/thermal/tango_thermal.c                    |  5 +++
> >>  drivers/thermal/tegra/soctherm.c                   |  3 ++
> >>  drivers/thermal/tegra/tegra-bpmp-thermal.c         |  3 ++
> >>  drivers/thermal/thermal-generic-adc.c              |  3 ++
> >>  drivers/thermal/thermal_core.c                     | 14 ++++----
> >>  drivers/thermal/thermal_helpers.c                  | 32
> >> ++++++++++++++++++
> >>  drivers/thermal/thermal_sysfs.c                    | 17 ++++++----
> >>  drivers/thermal/ti-soc-thermal/ti-thermal-common.c |  7 +++-
> >>  drivers/thermal/uniphier_thermal.c                 |  6 +++-
> >>  drivers/thermal/x86_pkg_temp_thermal.c             |  2 +-
> >>  drivers/thermal/zx2967_thermal.c                   |  3 ++
> >>  include/linux/thermal.h                            | 11 +++++++
> >>  44 files changed, 220 insertions(+), 87 deletions(-)
> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics

  reply	other threads:[~2018-11-06  0:46 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20181017155314epcas2p4a5aa24978b36354a2ccb2f9b0fb6f0f6@epcas2p4.samsung.com>
2018-10-17 15:52 ` Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155320epcas2p439b713149d94aa485b3c2ffba063ea03@epcas2p4.samsung.com>
2018-10-17 15:52     ` [PATCH v2 01/17] thermal: add thermal_zone_set_mode() helper Bartlomiej Zolnierkiewicz
2018-11-06  8:11       ` Zhang Rui
2018-11-06 16:11         ` Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155326epcas2p21d8b703f27fe54561a0f741fa7920dce@epcas2p2.samsung.com>
2018-10-17 15:52     ` [PATCH v2 02/17] thermal: add thermal_zone_device_check() helper Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155332epcas2p499ac9d53678d82a9984b3533e723a0dd@epcas2p4.samsung.com>
2018-10-17 15:52     ` [PATCH v2 03/17] thermal: separate sensor enable and check operations Bartlomiej Zolnierkiewicz
2018-10-26 12:11       ` Amit Kucheria
     [not found]   ` <CGME20181017155338epcas1p3a22cd0b22e757c3e51eb72ccee545478@epcas1p3.samsung.com>
2018-10-17 15:52     ` [PATCH v2 04/17] thermal: separate sensor registration and enable+check operations Bartlomiej Zolnierkiewicz
2018-10-31 12:40       ` Amit Kucheria
     [not found]   ` <CGME20181017155345epcas1p18dee37b9a46f2bf0b68aa3ded43f2717@epcas1p1.samsung.com>
2018-10-17 15:52     ` [PATCH v2 05/17] thermal: bcm2835: enable+check sensor after its setup is finished Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155351epcas1p171637911ef29cdec96dda648cfac51a5@epcas1p1.samsung.com>
2018-10-17 15:52     ` [PATCH v2 06/17] thermal: brcmstb: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155357epcas1p3900b1d3522c636fdee27ab9928c076e1@epcas1p3.samsung.com>
2018-10-17 15:52     ` [PATCH v2 07/17] thermal: hisi_thermal: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155403epcas2p1ed9777e96c6b2c77c2c5b67466be9843@epcas2p1.samsung.com>
2018-10-17 15:52     ` [PATCH v2 08/17] thermal: qcom: tsens: " Bartlomiej Zolnierkiewicz
2018-10-26 12:11       ` Amit Kucheria
2018-10-26 12:39         ` Amit Kucheria
     [not found]   ` <CGME20181017155409epcas2p41b5770668abdb4af99646841a3dd24ec@epcas2p4.samsung.com>
2018-10-17 15:52     ` [PATCH v2 09/17] thermal: qoriq: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155416epcas2p32f63571e9c06cd1aba2b40bcf23de8e1@epcas2p3.samsung.com>
2018-10-17 15:52     ` [PATCH v2 10/17] thermal: rcar_gen3_thermal: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155422epcas1p1644d897c62ceb36b57d33ecd4e3bc81c@epcas1p1.samsung.com>
2018-10-17 15:52     ` [PATCH v2 11/17] thermal: rockchip_thermal: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155428epcas2p1aca0b5e7b30b89db7be7026dfa740fc6@epcas2p1.samsung.com>
2018-10-17 15:52     ` [PATCH v2 12/17] thermal: exynos: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155434epcas1p33a6de1fda3c69cc966f954796a95a935@epcas1p3.samsung.com>
2018-10-17 15:52     ` [PATCH v2 13/17] thermal: tegra: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155440epcas1p12c33048a8c1c083496d1a8996591d884@epcas1p1.samsung.com>
2018-10-17 15:52     ` [PATCH v2 14/17] thermal: ti-soc-thermal: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155447epcas2p2db761f6575de357b65eb5e39b709fead@epcas2p2.samsung.com>
2018-10-17 15:52     ` [PATCH v2 15/17] thermal: uniphier: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155453epcas1p3be6976375c18583bcbebc7ff7853ae50@epcas1p3.samsung.com>
2018-10-17 15:52     ` [PATCH v2 16/17] thermal: zx2967: " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20181017155459epcas1p470bd73f433cdbb0f7a11aa8d46212e4e@epcas1p4.samsung.com>
2018-10-17 15:52     ` [PATCH v2 17/17] thermal: warn on attempts to read temperature on disabled sensors Bartlomiej Zolnierkiewicz
     [not found]   ` <1541387097.2124.9.camel@intel.com>
2018-11-05 16:35     ` [PATCH v2 00/17] thermal: enable+check sensor after its setup is finished Bartlomiej Zolnierkiewicz
2018-11-06  0:46       ` Eduardo Valentin [this message]
2018-11-06  7:34       ` Zhang Rui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181106004645.GB6086@localhost.localdomain \
    --to=edubezval@gmail.com \
    --cc=amit.kucheria@linaro.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=baoyou.xie@linaro.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=eric@anholt.net \
    --cc=heiko@sntech.de \
    --cc=j-keerthy@ti.com \
    --cc=jonathanh@nvidia.com \
    --cc=jun.nie@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mmayer@broadcom.com \
    --cc=rui.zhang@intel.com \
    --cc=shawnguo@kernel.org \
    --cc=stefan.wahren@i2se.com \
    --cc=thierry.reding@gmail.com \
    --cc=yamada.masahiro@socionext.com \
    --subject='Re: [PATCH v2 00/17] thermal: enable+check sensor after its setup is finished' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).