From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E2BBDC46465 for ; Thu, 8 Nov 2018 07:05:32 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 8A4B520825 for ; Thu, 8 Nov 2018 07:05:32 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=linaro.org header.i=@linaro.org header.b="UeL0O7xa" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 8A4B520825 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=linaro.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726807AbeKHQje (ORCPT ); Thu, 8 Nov 2018 11:39:34 -0500 Received: from mail-pf1-f195.google.com ([209.85.210.195]:47038 "EHLO mail-pf1-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726724AbeKHQje (ORCPT ); Thu, 8 Nov 2018 11:39:34 -0500 Received: by mail-pf1-f195.google.com with SMTP id s9-v6so1538420pfm.13 for ; Wed, 07 Nov 2018 23:05:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=b3XtQ7D3beA3BnefTuij4ySch3VdSSh3R1/oIOCMKaQ=; b=UeL0O7xaZWkTh/t3OyrOLhLe0o4cq8wQNaI6ZN1yyzff84xQhKldzQGkUEWIGYDSq2 i0rc29ikIOyPSg20+rFT/VGCzX8k+wOhhsxIIa5V9gakZveFiyUfSnrOLcbPJ3l2pSj/ tfQlmNDtMdu0hsHOKxOJE1AeW4qsdZYfEn5ec= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=b3XtQ7D3beA3BnefTuij4ySch3VdSSh3R1/oIOCMKaQ=; b=S+LijDm+e4VcUuvHUVgaydNKBt/KuyqYFZ0SIPZt0R0JAqHJGpc48txGV9ahxQ2Kzu 4REmKRGt9HRKBZQr1uY+lsU9HG8DpW4/0u9dO5xaXX2vESusIv9an2G1WLLJYWLKbl9v 9iiA1xGIW07+vGV0yQ1lfhRLjrJWXkUB5//eGTVPhA4Fjt6jKGT6uRAWr6Lx29tiE8ne yXZAtFoM/p9lG//X5IjFht33HfpXRWS59VbzcBg1QY3avjfh3SYG4kxgME1y1cNqyNDH OnjQIoitNFj4j2hGsBerUovVm4nPb88kevcTlyC6lnRDWWciL5Po5lruFpXrxwkl/lB6 HIdg== X-Gm-Message-State: AGRZ1gKbbwz1+x4lvLpivIb68G8Lv8eryK2FGk7FvmFmTmFINA0jMr+L eNeeyMXPPKKWrE22kwdi7tNKw71OlsFTRA== X-Google-Smtp-Source: AJdET5d9xZvcBznxzQQVOLEd1Gpi+xy2SmDqWbm6xpWBxmamHCJbe0xQA2gFiC2lvqGqZwYSneq1Ig== X-Received: by 2002:a62:3687:: with SMTP id d129-v6mr3500787pfa.56.1541660729577; Wed, 07 Nov 2018 23:05:29 -0800 (PST) Received: from localhost.localdomain (61-216-91-114.HINET-IP.hinet.net. [61.216.91.114]) by smtp.gmail.com with ESMTPSA id w63-v6sm2550618pgw.60.2018.11.07.23.05.25 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 07 Nov 2018 23:05:28 -0800 (PST) From: Shawn Guo To: Kishon Vijay Abraham I Cc: Rob Herring , Sriharsha Allenki , Anu Ramanathan , Bjorn Andersson , Vinod Koul , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Shawn Guo Subject: [PATCH 2/2] phy: qualcomm: Add Synopsys High-Speed USB PHY driver Date: Thu, 8 Nov 2018 15:04:49 +0800 Message-Id: <20181108070449.23572-3-shawn.guo@linaro.org> X-Mailer: git-send-email 2.18.0 In-Reply-To: <20181108070449.23572-1-shawn.guo@linaro.org> References: <20181108070449.23572-1-shawn.guo@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org It adds Synopsys 28nm Femto High-Speed USB PHY driver support, which is usually paired with Synopsys DWC3 USB controllers on Qualcomm SoCs. Signed-off-by: Shawn Guo --- drivers/phy/qualcomm/Kconfig | 10 + drivers/phy/qualcomm/Makefile | 1 + .../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c | 494 ++++++++++++++++++ 3 files changed, 505 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 32f7d34eb784..c7b5ee82895d 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -82,3 +82,13 @@ config PHY_QCOM_USB_HSIC select GENERIC_PHY help Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. + +config PHY_QCOM_USB_HS_SNPS_28NM + tristate "Qualcomm Synopsys 28nm USB HS PHY driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Enable this to support the Synopsys 28nm Femto USB PHY on Qualcomm + chips. This driver supports the high-speed PHY which is usually + paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index c56efd3af205..dc238d95b18c 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o +obj-$(CONFIG_PHY_QCOM_USB_HS_SNPS_28NM) += phy-qcom-usb-hs-snsp-28nm.o diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c new file mode 100644 index 000000000000..e3b23ccd4d37 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c @@ -0,0 +1,494 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2009-2018, Linux Foundation. All rights reserved. + * Copyright (c) 2018, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* PHY register and bit definitions */ +#define PHY_CTRL_COMMON0 0x078 +#define SIDDQ BIT(2) +#define PHY_IRQ_CMD 0x0d0 +#define PHY_INTR_CLEAR0 0x0dc +#define PHY_INTR_MASK0 0x0d4 +#define DPDM_MASK 0x1e +#define DP_1_0 BIT(4) +#define DP_0_1 BIT(3) +#define DM_1_0 BIT(2) +#define DM_0_1 BIT(1) + +enum hsphy_voltage { + VOL_NONE, + VOL_MIN, + VOL_MAX, + VOL_NUM, +}; + +enum hsphy_vreg { + VDD, + VDDA_1P8, + VDDA_3P3, + VREG_NUM, +}; + +struct hsphy_init_seq { + int offset; + int val; + int delay; +}; + +struct hsphy_priv { + void __iomem *base; + struct clk_bulk_data *clks; + int num_clks; + struct reset_control *phy_reset; + struct reset_control *por_reset; + struct regulator_bulk_data vregs[VREG_NUM]; + unsigned int voltages[VREG_NUM][VOL_NUM]; + struct hsphy_init_seq *init_seq; + bool cable_connected; + struct extcon_dev *vbus_edev; + struct notifier_block vbus_notify; + enum phy_mode mode; +}; + +static int qcom_snps_hsphy_config_regulators(struct hsphy_priv *priv, int high) +{ + int min, ret, i; + + min = high ? 1 : 0; /* low or none? */ + + for (i = 0; i < VREG_NUM; i++) { + ret = regulator_set_voltage(priv->vregs[i].consumer, + priv->voltages[i][min], + priv->voltages[i][VOL_MAX]); + if (ret) + return ret; + } + + return 0; +} + +static int qcom_snps_hsphy_enable_regulators(struct hsphy_priv *priv) +{ + int ret; + + ret = qcom_snps_hsphy_config_regulators(priv, 1); + if (ret) + return ret; + + ret = regulator_set_load(priv->vregs[VDDA_1P8].consumer, 19000); + if (ret < 0) + goto unconfig_regulators; + + ret = regulator_set_load(priv->vregs[VDDA_3P3].consumer, 16000); + if (ret < 0) + goto unset_1p8_load; + + ret = regulator_bulk_enable(VREG_NUM, priv->vregs); + if (ret) + goto unset_3p3_load; + + return 0; + +unset_3p3_load: + regulator_set_load(priv->vregs[VDDA_3P3].consumer, 0); +unset_1p8_load: + regulator_set_load(priv->vregs[VDDA_1P8].consumer, 0); +unconfig_regulators: + qcom_snps_hsphy_config_regulators(priv, 0); + return ret; +} + +static void qcom_snps_hsphy_disable_regulators(struct hsphy_priv *priv) +{ + regulator_bulk_disable(VREG_NUM, priv->vregs); + regulator_set_load(priv->vregs[VDDA_1P8].consumer, 0); + regulator_set_load(priv->vregs[VDDA_3P3].consumer, 0); + qcom_snps_hsphy_config_regulators(priv, 0); +} + +static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + + priv->mode = mode; + + return 0; +} + +static void qcom_snps_hsphy_enable_hv_interrupts(struct hsphy_priv *priv) +{ + u32 val; + + /* Clear any existing interrupts before enabling the interrupts */ + val = readb(priv->base + PHY_INTR_CLEAR0); + val |= DPDM_MASK; + writeb(val, priv->base + PHY_INTR_CLEAR0); + + writeb(0x0, priv->base + PHY_IRQ_CMD); + usleep_range(200, 220); + writeb(0x1, priv->base + PHY_IRQ_CMD); + + /* Make sure the interrupts are cleared */ + usleep_range(200, 220); + + val = readb(priv->base + PHY_INTR_MASK0); + switch (priv->mode) { + case PHY_MODE_USB_HOST_HS: + case PHY_MODE_USB_HOST_FS: + case PHY_MODE_USB_DEVICE_HS: + case PHY_MODE_USB_DEVICE_FS: + val |= DP_1_0 | DM_0_1; + break; + case PHY_MODE_USB_HOST_LS: + case PHY_MODE_USB_DEVICE_LS: + val |= DP_0_1 | DM_1_0; + break; + default: + /* No device connected */ + val |= DP_0_1 | DM_0_1; + break; + } + writeb(val, priv->base + PHY_INTR_MASK0); +} + +static void qcom_snps_hsphy_disable_hv_interrupts(struct hsphy_priv *priv) +{ + u32 val; + + val = readb(priv->base + PHY_INTR_MASK0); + val &= ~DPDM_MASK; + writeb(val, priv->base + PHY_INTR_MASK0); + + /* Clear any pending interrupts */ + val = readb(priv->base + PHY_INTR_CLEAR0); + val |= DPDM_MASK; + writeb(val, priv->base + PHY_INTR_CLEAR0); + + writeb(0x0, priv->base + PHY_IRQ_CMD); + usleep_range(200, 220); + + writeb(0x1, priv->base + PHY_IRQ_CMD); + usleep_range(200, 220); +} + +static void qcom_snps_hsphy_enter_retention(struct hsphy_priv *priv) +{ + u32 val; + + val = readb(priv->base + PHY_CTRL_COMMON0); + val |= SIDDQ; + writeb(val, priv->base + PHY_CTRL_COMMON0); +} + +static void qcom_snps_hsphy_exit_retention(struct hsphy_priv *priv) +{ + u32 val; + + val = readb(priv->base + PHY_CTRL_COMMON0); + val &= ~SIDDQ; + writeb(val, priv->base + PHY_CTRL_COMMON0); +} + +static int qcom_snps_hsphy_vbus_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct hsphy_priv *priv = container_of(nb, struct hsphy_priv, + vbus_notify); + priv->cable_connected = !!event; + return 0; +} + +static int qcom_snps_hsphy_power_on(struct phy *phy) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + int ret; + + if (priv->cable_connected) { + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); + if (ret) + return ret; + qcom_snps_hsphy_disable_hv_interrupts(priv); + } else { + ret = qcom_snps_hsphy_enable_regulators(priv); + if (ret) + return ret; + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); + if (ret) + return ret; + qcom_snps_hsphy_exit_retention(priv); + } + + return 0; +} + +static int qcom_snps_hsphy_power_off(struct phy *phy) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + + if (priv->cable_connected) { + qcom_snps_hsphy_enable_hv_interrupts(priv); + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + } else { + qcom_snps_hsphy_enter_retention(priv); + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + qcom_snps_hsphy_disable_regulators(priv); + } + + return 0; +} + +static int qcom_snps_hsphy_reset(struct hsphy_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->phy_reset); + if (ret) + return ret; + + usleep_range(10, 15); + + ret = reset_control_deassert(priv->phy_reset); + if (ret) + return ret; + + usleep_range(80, 100); + + return 0; +} + +static void qcom_snps_hsphy_init_sequence(struct hsphy_priv *priv) +{ + struct hsphy_init_seq *seq; + + for (seq = priv->init_seq; seq->offset != -1; seq++) { + writeb(seq->val, priv->base + seq->offset); + if (seq->delay) + usleep_range(seq->delay, seq->delay + 10); + } + + /* Ensure that the above parameter overrides is successful. */ + mb(); +} + +static int qcom_snps_hsphy_por_reset(struct hsphy_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->por_reset); + if (ret) + return ret; + + /* + * The Femto PHY is POR reset in the following scenarios. + * + * 1. After overriding the parameter registers. + * 2. Low power mode exit from PHY retention. + * + * Ensure that SIDDQ is cleared before bringing the PHY + * out of reset. + */ + qcom_snps_hsphy_exit_retention(priv); + + /* + * As per databook, 10 usec delay is required between + * PHY POR assert and de-assert. + */ + usleep_range(10, 20); + ret = reset_control_deassert(priv->por_reset); + if (ret) + return ret; + + /* + * As per databook, it takes 75 usec for PHY to stabilize + * after the reset. + */ + usleep_range(80, 100); + + /* Ensure that RESET operation is completed. */ + mb(); + + return 0; +} + +static int qcom_snps_hsphy_init(struct phy *phy) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + int state; + int ret; + + ret = qcom_snps_hsphy_reset(priv); + if (ret) + return ret; + + qcom_snps_hsphy_init_sequence(priv); + + ret = qcom_snps_hsphy_por_reset(priv); + if (ret) + return ret; + + /* Setup initial state */ + if (priv->vbus_edev) { + state = extcon_get_state(priv->vbus_edev, EXTCON_USB); + ret = qcom_snps_hsphy_vbus_notifier(&priv->vbus_notify, state, + priv->vbus_edev); + if (ret) + return ret; + } + + return 0; +} + +static const struct phy_ops qcom_snps_hsphy_ops = { + .init = qcom_snps_hsphy_init, + .power_on = qcom_snps_hsphy_power_on, + .power_off = qcom_snps_hsphy_power_off, + .set_mode = qcom_snps_hsphy_set_mode, + .owner = THIS_MODULE, +}; + +static const char * const qcom_snps_hsphy_clks[] = { + "ref", + "phy", + "sleep", +}; + +static int qcom_snps_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *provider; + struct hsphy_priv *priv; + struct resource *res; + struct phy *phy; + int size; + int ret; + int i; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->num_clks = ARRAY_SIZE(qcom_snps_hsphy_clks); + priv->clks = devm_kcalloc(dev, priv->num_clks, sizeof(*priv->clks), + GFP_KERNEL); + if (!priv->clks) + return -ENOMEM; + + for (i = 0; i < priv->num_clks; i++) + priv->clks[i].id = qcom_snps_hsphy_clks[i]; + + ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks); + if (ret) + return ret; + + priv->phy_reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(priv->phy_reset)) + return PTR_ERR(priv->phy_reset); + + priv->por_reset = devm_reset_control_get(dev, "por"); + if (IS_ERR(priv->por_reset)) + return PTR_ERR(priv->por_reset); + + priv->vregs[VDD].supply = "vdd"; + priv->vregs[VDDA_1P8].supply = "vdda1p8"; + priv->vregs[VDDA_3P3].supply = "vdda3p3"; + + ret = devm_regulator_bulk_get(dev, VREG_NUM, priv->vregs); + if (ret) + return ret; + + priv->voltages[VDDA_1P8][VOL_NONE] = 0; + priv->voltages[VDDA_1P8][VOL_MIN] = 1800000; + priv->voltages[VDDA_1P8][VOL_MAX] = 1800000; + + priv->voltages[VDDA_3P3][VOL_NONE] = 0; + priv->voltages[VDDA_3P3][VOL_MIN] = 3050000; + priv->voltages[VDDA_3P3][VOL_MAX] = 3300000; + + ret = of_property_read_u32_array(dev->of_node, "qcom,vdd-voltage-level", + priv->voltages[VDD], VOL_NUM); + if (ret) { + dev_err(dev, "failed to read qcom,vdd-voltage-level\n"); + return ret; + } + + size = of_property_count_u32_elems(dev->of_node, "qcom,init-seq"); + if (size < 0) + size = 0; + + priv->init_seq = devm_kcalloc(dev, (size / 3) + 1, + sizeof(*priv->init_seq), GFP_KERNEL); + if (!priv->init_seq) + return -ENOMEM; + + ret = of_property_read_u32_array(dev->of_node, "qcom,init-seq", + (u32 *) priv->init_seq, size); + if (ret && size) + return ret; + + /* terminator */ + priv->init_seq[size / 3].offset = -1; + + phy = devm_phy_create(dev, dev->of_node, &qcom_snps_hsphy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + priv->vbus_edev = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(priv->vbus_edev)) { + if (PTR_ERR(priv->vbus_edev) != -ENODEV) + return PTR_ERR(priv->vbus_edev); + priv->vbus_edev = NULL; + } + + if (priv->vbus_edev) { + priv->vbus_notify.notifier_call = qcom_snps_hsphy_vbus_notifier; + ret = devm_extcon_register_notifier(dev, priv->vbus_edev, + EXTCON_USB, + &priv->vbus_notify); + if (ret) + return ret; + } + + phy_set_drvdata(phy, priv); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id qcom_snps_hsphy_match[] = { + { .compatible = "qcom,usb-snps-hsphy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_match); + +static struct platform_driver qcom_snps_hsphy_driver = { + .probe = qcom_snps_hsphy_probe, + .driver = { + .name = "qcom-usb-snps-hsphy", + .of_match_table = qcom_snps_hsphy_match, + }, +}; +module_platform_driver(qcom_snps_hsphy_driver); + +MODULE_DESCRIPTION("Qualcomm Synopsys 28nm USB High-Speed PHY driver"); +MODULE_LICENSE("GPL v2"); -- 2.18.0