linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: grygorii.strashko@ti.com, davem@davemloft.net
Cc: linux-omap@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, alexander.h.duyck@intel.com,
	bjorn@mork.no, Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Subject: [PATCH v2 net-next 4/4] net: ethernet: ti: cpsw: fix vlan configuration while down/up
Date: Thu,  8 Nov 2018 22:27:57 +0200	[thread overview]
Message-ID: <20181108202757.30110-5-ivan.khoronzhuk@linaro.org> (raw)
In-Reply-To: <20181108202757.30110-1-ivan.khoronzhuk@linaro.org>

The vlan configuration is not restored after interface donw/up sequence
(if dual-emac - both interfaces). Tested on am572x EVM.

Steps to check:
~# ip link add link eth1 name eth1.100 type vlan id 100
~# ifconfig eth0 down
~# ifconfig eth1 down

Try to remove vid and observe warning:
~# ip link del eth1.100
[  739.526757] net eth1: removing vlanid 100 from vlan filter
[  739.533322] failed to kill vid 0081/100 for device eth1

This patch fixes it, restoring only vlan ALE entries and all other
unicast/multicast entries are restored by system calling rx_mode ndo.

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
---
 drivers/net/ethernet/ti/cpsw.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 0b18634d336c..9434fd5a5477 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -565,6 +565,9 @@ static const struct cpsw_stats cpsw_gstrings_ch_stats[] = {
 				(func)(slave++, ##arg);			\
 	} while (0)
 
+static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev,
+				    __be16 proto, u16 vid);
+
 static inline int cpsw_get_slave_port(u32 slave_num)
 {
 	return slave_num + 1;
@@ -1951,9 +1954,23 @@ static void cpsw_mqprio_resume(struct cpsw_slave *slave, struct cpsw_priv *priv)
 	slave_write(slave, tx_prio_map, tx_prio_rg);
 }
 
+static int cpsw_restore_vlans(struct net_device *vdev, int vid, void *arg)
+{
+	struct cpsw_priv *priv = arg;
+
+	if (!vdev)
+		return 0;
+
+	cpsw_ndo_vlan_rx_add_vid(priv->ndev, 0, vid);
+	return 0;
+}
+
 /* restore resources after port reset */
 static void cpsw_restore(struct cpsw_priv *priv)
 {
+	/* restore vlan configurations */
+	vlan_for_each(priv->ndev, cpsw_restore_vlans, priv);
+
 	/* restore MQPRIO offload */
 	for_each_slave(priv, cpsw_mqprio_resume, priv);
 
-- 
2.17.1


  parent reply	other threads:[~2018-11-08 20:31 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-08 20:27 [PATCH v2 net-next 0/4] net: ethernet: ti: cpsw: fix vlan mcast Ivan Khoronzhuk
2018-11-08 20:27 ` [PATCH v2 net-next 1/4] net: core: dev_addr_lists: add auxiliary func to handle reference address updates Ivan Khoronzhuk
2018-11-08 20:27 ` [PATCH v2 net-next 2/4] net: 8021q: vlan_core: allow use list of vlans for real device Ivan Khoronzhuk
2018-11-08 20:27 ` [PATCH v2 net-next 3/4] net: ethernet: ti: cpsw: fix vlan mcast Ivan Khoronzhuk
2018-11-08 20:27 ` Ivan Khoronzhuk [this message]
2018-11-09  4:32 ` [PATCH v2 net-next 0/4] " David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181108202757.30110-5-ivan.khoronzhuk@linaro.org \
    --to=ivan.khoronzhuk@linaro.org \
    --cc=alexander.h.duyck@intel.com \
    --cc=bjorn@mork.no \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH v2 net-next 4/4] net: ethernet: ti: cpsw: fix vlan configuration while down/up' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox