linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "mika.westerberg@linux.intel.com" <mika.westerberg@linux.intel.com>
To: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Wangzhou (B)" <wangzhou1@hisilicon.com>,
	Linuxarm <linuxarm@huawei.com>, Lukas Wunner <lukas@wunner.de>
Subject: Re: Qemu Guest kernel 4.20-rc1 PCIe hotplug issue
Date: Tue, 13 Nov 2018 14:59:10 +0200	[thread overview]
Message-ID: <20181113125910.GB2500@lahna.fi.intel.com> (raw)
In-Reply-To: <5FC3163CFD30C246ABAA99954A238FA8387DF43F@FRAEML521-MBX.china.huawei.com>

On Tue, Nov 13, 2018 at 12:36:20PM +0000, Shameerali Kolothum Thodi wrote:
> > @@ -156,9 +156,9 @@ static void pcie_do_write_cmd(struct controller *ctrl,
> > u16 cmd,
> >  	slot_ctrl |= (cmd & mask);
> >  	ctrl->cmd_busy = 1;
> >  	smp_mb();
> > +	ctrl->slot_ctrl = slot_ctrl;
> 
> Actually I tried this one, but it doesn't help in this case as the initial 
> pcie_capability_read_word() returns the slot_ctrl without PCI_EXP_SLTCTL_HPIE
> bit set.  It looks to me  pcie_enable_notification() function enables this,
> 
> 	if (!pciehp_poll_mode)
> 		cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
> 
> I don't know this is as per the spec or not as the initial cap read doesn't seems to
> have the PCI_EXP_SLTCTL_HPIE bit set.

If I read the code right cmd value should end up in ctrl->slot_ctrl
properly from pcie_enable_notification().

However, I think we are missing check for PCI_EXP_SLTCTL_CCIE in
pciehp_isr().

Here's an updated patch, can you try and see if it makes any difference?

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 7dd443aea5a5..da2cbe892444 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -156,9 +156,9 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 	slot_ctrl |= (cmd & mask);
 	ctrl->cmd_busy = 1;
 	smp_mb();
+	ctrl->slot_ctrl = slot_ctrl;
 	pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl);
 	ctrl->cmd_started = jiffies;
-	ctrl->slot_ctrl = slot_ctrl;
 
 	/*
 	 * Controllers with the Intel CF118 and similar errata advertise
@@ -522,7 +522,7 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 	 * in the Slot Control register (PCIe r4.0, sec 6.7.3.4).
 	 */
 	if (pdev->current_state == PCI_D3cold ||
-	    (!(ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE) && !pciehp_poll_mode))
+	    (!(ctrl->slot_ctrl & (PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE)) && !pciehp_poll_mode))
 		return IRQ_NONE;
 
 	/*

  parent reply	other threads:[~2018-11-13 12:59 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-13 11:45 Qemu Guest kernel 4.20-rc1 PCIe hotplug issue Shameerali Kolothum Thodi
2018-11-13 12:25 ` mika.westerberg
2018-11-13 12:36   ` Shameerali Kolothum Thodi
2018-11-13 12:56     ` Shameerali Kolothum Thodi
2018-11-13 12:59     ` mika.westerberg [this message]
2018-11-13 13:28       ` Shameerali Kolothum Thodi
2018-11-13 15:07         ` mika.westerberg
2018-11-13 15:57           ` Shameerali Kolothum Thodi
2018-11-14  9:52             ` mika.westerberg
2018-11-14 13:30               ` Lukas Wunner
2018-11-14 14:50                 ` mika.westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181113125910.GB2500@lahna.fi.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=lukas@wunner.de \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=wangzhou1@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).