linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nadav Amit <namit@vmware.com>
To: Ingo Molnar <mingo@redhat.com>
Cc: <linux-kernel@vger.kernel.org>, <x86@kernel.org>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Peter Zijlstra <peterz@infradead.org>, <linux_dti@icloud.com>,
	<linux-integrity@vger.kernel.org>,
	<linux-security-module@vger.kernel.org>,
	Nadav Amit <namit@vmware.com>, Kees Cook <keescook@chromium.org>,
	Dave Hansen <dave.hansen@intel.com>
Subject: [PATCH v5 05/10] x86/alternative: initializing temporary mm for patching
Date: Tue, 13 Nov 2018 05:07:25 -0800	[thread overview]
Message-ID: <20181113130730.44844-6-namit@vmware.com> (raw)
In-Reply-To: <20181113130730.44844-1-namit@vmware.com>

To prevent improper use of the PTEs that are used for text patching, we
want to use a temporary mm struct. We initailize it by copying the init
mm.

The address that will be used for patching is taken from the lower area
that is usually used for the task memory. Doing so prevents the need to
frequently synchronize the temporary-mm (e.g., when BPF programs are
installed), since different PGDs are used for the task memory.

Finally, we randomize the address of the PTEs to harden against exploits
that use these PTEs.

Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
---
 arch/x86/include/asm/pgtable.h       |  3 +++
 arch/x86/include/asm/text-patching.h |  2 ++
 arch/x86/kernel/alternative.c        |  3 +++
 arch/x86/mm/init_64.c                | 35 ++++++++++++++++++++++++++++
 init/main.c                          |  3 +++
 5 files changed, 46 insertions(+)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 40616e805292..e8f630d9a2ed 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1021,6 +1021,9 @@ static inline void __meminit init_trampoline_default(void)
 	/* Default trampoline pgd value */
 	trampoline_pgd_entry = init_top_pgt[pgd_index(__PAGE_OFFSET)];
 }
+
+void __init poking_init(void);
+
 # ifdef CONFIG_RANDOMIZE_MEMORY
 void __meminit init_trampoline(void);
 # else
diff --git a/arch/x86/include/asm/text-patching.h b/arch/x86/include/asm/text-patching.h
index 5a2600370763..e5716ef9a721 100644
--- a/arch/x86/include/asm/text-patching.h
+++ b/arch/x86/include/asm/text-patching.h
@@ -39,5 +39,7 @@ extern int text_poke_kgdb(void *addr, const void *opcode, size_t len);
 extern int poke_int3_handler(struct pt_regs *regs);
 extern void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler);
 extern int after_bootmem;
+extern __ro_after_init struct mm_struct *poking_mm;
+extern __ro_after_init unsigned long poking_addr;
 
 #endif /* _ASM_X86_TEXT_PATCHING_H */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index ebe9210dc92e..d3ae5c26e5a0 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -678,6 +678,9 @@ void *__init_or_module text_poke_early(void *addr, const void *opcode,
 	return addr;
 }
 
+__ro_after_init struct mm_struct *poking_mm;
+__ro_after_init unsigned long poking_addr;
+
 static int __text_poke(void *addr, const void *opcode, size_t len)
 {
 	unsigned long flags;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 5fab264948c2..356a28569a19 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -53,6 +53,7 @@
 #include <asm/init.h>
 #include <asm/uv/uv.h>
 #include <asm/setup.h>
+#include <asm/text-patching.h>
 
 #include "mm_internal.h"
 
@@ -1388,6 +1389,40 @@ unsigned long memory_block_size_bytes(void)
 	return memory_block_size_probed;
 }
 
+/*
+ * Initialize an mm_struct to be used during poking and a pointer to be used
+ * during patching.
+ */
+void __init poking_init(void)
+{
+	spinlock_t *ptl;
+	pte_t *ptep;
+
+	poking_mm = copy_init_mm();
+	BUG_ON(!poking_mm);
+
+	/*
+	 * Randomize the poking address, but make sure that the following page
+	 * will be mapped at the same PMD. We need 2 pages, so find space for 3,
+	 * and adjust the address if the PMD ends after the first one.
+	 */
+	poking_addr = TASK_UNMAPPED_BASE +
+		(kaslr_get_random_long("Poking") & PAGE_MASK) %
+		(TASK_SIZE - TASK_UNMAPPED_BASE - 3 * PAGE_SIZE);
+
+	if (((poking_addr + PAGE_SIZE) & ~PMD_MASK) == 0)
+		poking_addr += PAGE_SIZE;
+
+	/*
+	 * We need to trigger the allocation of the page-tables that will be
+	 * needed for poking now. Later, poking may be performed in an atomic
+	 * section, which might cause allocation to fail.
+	 */
+	ptep = get_locked_pte(poking_mm, poking_addr, &ptl);
+	BUG_ON(!ptep);
+	pte_unmap_unlock(ptep, ptl);
+}
+
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 /*
  * Initialise the sparsemem vmemmap using huge-pages at the PMD level.
diff --git a/init/main.c b/init/main.c
index ee147103ba1b..a461150adfb1 100644
--- a/init/main.c
+++ b/init/main.c
@@ -497,6 +497,8 @@ void __init __weak thread_stack_cache_init(void)
 
 void __init __weak mem_encrypt_init(void) { }
 
+void __init __weak poking_init(void) { }
+
 bool initcall_debug;
 core_param(initcall_debug, initcall_debug, bool, 0644);
 
@@ -731,6 +733,7 @@ asmlinkage __visible void __init start_kernel(void)
 	taskstats_init_early();
 	delayacct_init();
 
+	poking_init();
 	check_bugs();
 
 	acpi_subsystem_init();
-- 
2.17.1


  parent reply	other threads:[~2018-11-13 20:25 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-13 13:07 [PATCH v5 00/10] x86/alternative: text_poke() fixes Nadav Amit
2018-11-13 13:07 ` [PATCH v5 01/10] Fix "x86/alternatives: Lockdep-enforce text_mutex in text_poke*()" Nadav Amit
2018-11-13 13:07 ` [PATCH v5 02/10] x86/jump_label: Use text_poke_early() during early init Nadav Amit
2018-11-20 18:10   ` H. Peter Anvin
2018-11-20 18:18     ` Peter Zijlstra
2018-11-20 18:23       ` H. Peter Anvin
2018-11-20 18:47         ` Nadav Amit
2018-11-13 13:07 ` [PATCH v5 03/10] x86/mm: temporary mm struct Nadav Amit
2018-11-13 13:07 ` [PATCH v5 04/10] fork: provide a function for copying init_mm Nadav Amit
2018-11-13 13:07 ` Nadav Amit [this message]
2018-11-13 13:07 ` [PATCH v5 06/10] x86/alternative: use temporary mm for text poking Nadav Amit
2018-11-13 13:07 ` [PATCH v5 07/10] x86/kgdb: avoid redundant comparison of patched code Nadav Amit
2018-11-13 13:07 ` [PATCH v5 08/10] x86: avoid W^X being broken during modules loading Nadav Amit
2018-11-13 13:07 ` [PATCH v5 09/10] x86/jump-label: remove support for custom poker Nadav Amit
2018-11-13 13:07 ` [PATCH v5 10/10] x86/alternative: remove the return value of text_poke_*() Nadav Amit
2018-11-20 12:42 ` [PATCH v5 00/10] x86/alternative: text_poke() fixes Peter Zijlstra
2018-11-20 18:52   ` Nadav Amit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181113130730.44844-6-namit@vmware.com \
    --to=namit@vmware.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=keescook@chromium.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=linux_dti@icloud.com \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --subject='Re: [PATCH v5 05/10] x86/alternative: initializing temporary mm for patching' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).