linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Eckert <fe@dev.tdt.de>
To: linus.walleij@linaro.org, tglx@linutronix.de, mingo@redhat.com,
	bp@alien8.de, andy.shevchenko@gmail.com, joe@perches.com,
	chunkeey@gmail.com, piotr.krol@3mdeb.com, dvhart@infradead.org
Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: [PATCH v3 2/2] kernel: Add reset button platform device for APU2/APU3
Date: Wed, 14 Nov 2018 08:26:58 +0100	[thread overview]
Message-ID: <20181114072658.11457-3-fe@dev.tdt.de> (raw)
In-Reply-To: <20181114072658.11457-1-fe@dev.tdt.de>

This will add a x86 platform device "gpio-keys-polled" which uses the
new gpio-apu drive for APU2 and APU3 boards from PC Engines.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
---
 arch/x86/Kconfig               | 14 ++++++++
 arch/x86/platform/Makefile     |  1 +
 arch/x86/platform/amd/Makefile |  1 +
 arch/x86/platform/amd/apu.c    | 72 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 88 insertions(+)
 create mode 100644 arch/x86/platform/amd/Makefile
 create mode 100644 arch/x86/platform/amd/apu.c

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9d734f3c8234..97c53286fdb6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2820,6 +2820,20 @@ config TS5500
 
 endif # X86_32
 
+if X86_64
+config APU
+	bool "PCEngines APU System Support"
+	help
+	  This option enables system support for the PCEngines APU platform.
+	  At present this just sets up the reset button control on
+	  APU2/APU3 boards. However, other system specific setup should
+	  get added here.
+
+	  Note: You must still enable the drivers for GPIO and LED support
+	  (GPIO_APU & LEDS_APU) to actually use the LEDs and the GPIOs
+
+endif # X86_64
+
 config AMD_NB
 	def_bool y
 	depends on CPU_SUP_AMD && PCI
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index d0e835470d01..a95d18810c29 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # Platform specific code goes here
 obj-y	+= atom/
+obj-y	+= amd/
 obj-y	+= ce4100/
 obj-y	+= efi/
 obj-y	+= geode/
diff --git a/arch/x86/platform/amd/Makefile b/arch/x86/platform/amd/Makefile
new file mode 100644
index 000000000000..bf04c5799d7f
--- /dev/null
+++ b/arch/x86/platform/amd/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_APU)		+=apu.o
diff --git a/arch/x86/platform/amd/apu.c b/arch/x86/platform/amd/apu.c
new file mode 100644
index 000000000000..a4b695881177
--- /dev/null
+++ b/arch/x86/platform/amd/apu.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Specific setup for PC-Engines APU2/APU3 devices
+ *
+ * Copyright (C) 2018 Florian Eckert <fe@dev.tdt.de>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/dmi.h>
+
+static struct gpio_keys_button apu_gpio_buttons[] = {
+	{
+		.code			= KEY_RESTART,
+		.gpio			= 20,
+		.active_low		= 1,
+		.desc			= "Reset button",
+		.type			= EV_KEY,
+		.debounce_interval	= 60,
+	}
+};
+
+static struct gpio_keys_platform_data apu_buttons_data = {
+	.buttons		= apu_gpio_buttons,
+	.nbuttons		= ARRAY_SIZE(apu_gpio_buttons),
+	.poll_interval		= 20,
+};
+
+static struct platform_device apu_buttons_dev = {
+	.name			= "gpio-keys-polled",
+	.id			= 1,
+	.dev = {
+		.platform_data		= &apu_buttons_data,
+	}
+};
+
+static struct platform_device *apu_devs[] __initdata = {
+		&apu_buttons_dev,
+};
+
+static void __init register_apu(void)
+{
+	/* Setup push button control through gpio-apu driver */
+	platform_add_devices(apu_devs, ARRAY_SIZE(apu_devs));
+}
+
+static int __init apu_init(void)
+{
+	if (!dmi_match(DMI_SYS_VENDOR, "PC Engines")) {
+		pr_err("No PC Engines board detected\n");
+		return -ENODEV;
+	}
+
+	if (!(dmi_match(DMI_PRODUCT_NAME, "APU2") ||
+	      dmi_match(DMI_PRODUCT_NAME, "apu2") ||
+	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2") ||
+	      dmi_match(DMI_PRODUCT_NAME, "APU3") ||
+	      dmi_match(DMI_PRODUCT_NAME, "apu3") ||
+	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu3"))) {
+		pr_err("Unknown PC Engines board: %s\n",
+			dmi_get_system_info(DMI_PRODUCT_NAME));
+		return -ENODEV;
+	}
+
+	register_apu();
+
+	return 0;
+}
+
+device_initcall(apu_init);
-- 
2.11.0


  parent reply	other threads:[~2018-11-14  7:35 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-14  7:26 [PATCH v3 0/2] Add device driver for APU2/APU3 GPIOs Florian Eckert
2018-11-14  7:26 ` [PATCH v3 1/2] gpio: Add driver for PC Engines " Florian Eckert
2018-11-14  8:53   ` Andy Shevchenko
2018-11-14  7:26 ` Florian Eckert [this message]
2018-11-14  9:00   ` [PATCH v3 2/2] kernel: Add reset button platform device for APU2/APU3 Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181114072658.11457-3-fe@dev.tdt.de \
    --to=fe@dev.tdt.de \
    --cc=andy.shevchenko@gmail.com \
    --cc=bp@alien8.de \
    --cc=chunkeey@gmail.com \
    --cc=dvhart@infradead.org \
    --cc=joe@perches.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=piotr.krol@3mdeb.com \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH v3 2/2] kernel: Add reset button platform device for APU2/APU3' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox