[PATCH 1/4] USB: omap_udc: use devm_request_irq()

[PATCH 1/4] USB: omap_udc: use devm_request_irq()

[Aaro Koskinen]

The current code fails to release the third irq on the error path
(observed by reading the code), and we get also multiple WARNs with
failing gadget drivers due to duplicate IRQ releases. Fix by using
devm_request_irq().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 drivers/usb/gadget/udc/omap_udc.c | 37 +++++++++----------------------
 1 file changed, 10 insertions(+), 27 deletions(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 3a16431da321..1c77218c82af 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2867,8 +2867,8 @@ static int omap_udc_probe(struct platform_device *pdev)
 		udc->clr_halt = UDC_RESET_EP;
 
 	/* USB general purpose IRQ:  ep0, state changes, dma, etc */
-	status = request_irq(pdev->resource[1].start, omap_udc_irq,
-			0, driver_name, udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[1].start,
+				  omap_udc_irq, 0, driver_name, udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[1].start, status);
@@ -2876,20 +2876,20 @@ static int omap_udc_probe(struct platform_device *pdev)
 	}
 
 	/* USB "non-iso" IRQ (PIO for all but ep0) */
-	status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
-			0, "omap_udc pio", udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[2].start,
+				  omap_udc_pio_irq, 0, "omap_udc pio", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[2].start, status);
-		goto cleanup2;
+		goto cleanup1;
 	}
 #ifdef	USE_ISO
-	status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
-			0, "omap_udc iso", udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[3].start,
+				  omap_udc_iso_irq, 0, "omap_udc iso", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[3].start, status);
-		goto cleanup3;
+		goto cleanup1;
 	}
 #endif
 	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
@@ -2902,22 +2902,11 @@ static int omap_udc_probe(struct platform_device *pdev)
 	create_proc_file();
 	status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
 			omap_udc_release);
-	if (status)
-		goto cleanup4;
-
-	return 0;
+	if (!status)
+		return 0;
 
-cleanup4:
 	remove_proc_file();
 
-#ifdef	USE_ISO
-cleanup3:
-	free_irq(pdev->resource[2].start, udc);
-#endif
-
-cleanup2:
-	free_irq(pdev->resource[1].start, udc);
-
 cleanup1:
 	kfree(udc);
 	udc = NULL;
@@ -2961,12 +2950,6 @@ static int omap_udc_remove(struct platform_device *pdev)
 
 	remove_proc_file();
 
-#ifdef	USE_ISO
-	free_irq(pdev->resource[3].start, udc);
-#endif
-	free_irq(pdev->resource[2].start, udc);
-	free_irq(pdev->resource[1].start, udc);
-
 	if (udc->dc_clk) {
 		if (udc->clk_requested)
 			omap_udc_enable_clock(0);
-- 
2.17.0

[PATCH 2/4] USB: omap_udc: fix crashes on probe error and module removal

[Aaro Koskinen]

We currently crash if usb_add_gadget_udc_release() fails, since the
udc->done is not initialized until in the remove function. Furthermore, on
module removal the udc data is accessed although the release function
is already triggered by usb_del_gadget_udc() early in the function.
Fix by releasing the data manually.

The patch fixes omap_udc module probe with a failing gadged, and also
allows the removal of omap_udc. Tested by running "modprobe omap_udc;
modprobe -r omap_udc" in a loop.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 drivers/usb/gadget/udc/omap_udc.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 1c77218c82af..d98782ec254d 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2591,9 +2591,8 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	return buf;
 }
 
-static void omap_udc_release(struct device *dev)
+static void omap_udc_release(void)
 {
-	complete(udc->done);
 	kfree(udc);
 	udc = NULL;
 }
@@ -2900,16 +2899,14 @@ static int omap_udc_probe(struct platform_device *pdev)
 	}
 
 	create_proc_file();
-	status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
-			omap_udc_release);
+	status = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (!status)
 		return 0;
 
 	remove_proc_file();
 
 cleanup1:
-	kfree(udc);
-	udc = NULL;
+	omap_udc_release();
 
 cleanup0:
 	if (!IS_ERR_OR_NULL(xceiv))
@@ -2930,8 +2927,6 @@ static int omap_udc_probe(struct platform_device *pdev)
 
 static int omap_udc_remove(struct platform_device *pdev)
 {
-	DECLARE_COMPLETION_ONSTACK(done);
-
 	if (!udc)
 		return -ENODEV;
 
@@ -2939,8 +2934,6 @@ static int omap_udc_remove(struct platform_device *pdev)
 	if (udc->driver)
 		return -EBUSY;
 
-	udc->done = &done;
-
 	pullup_disable(udc);
 	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		usb_put_phy(udc->transceiver);
@@ -2960,7 +2953,7 @@ static int omap_udc_remove(struct platform_device *pdev)
 	release_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1);
 
-	wait_for_completion(&done);
+	omap_udc_release();
 
 	return 0;
 }
-- 
2.17.0

[PATCH 3/4] USB: omap_udc: fix omap_udc_start() on 15xx machines

[Aaro Koskinen]

On OMAP 15xx machines there are no transceivers, and omap_udc_start()
always fails as it forgot to adjust the default return value.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 drivers/usb/gadget/udc/omap_udc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index d98782ec254d..7c240b1921bd 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2041,7 +2041,7 @@ static inline int machine_without_vbus_sense(void)
 static int omap_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver)
 {
-	int		status = -ENODEV;
+	int		status;
 	struct omap_ep	*ep;
 	unsigned long	flags;
 
@@ -2079,6 +2079,7 @@ static int omap_udc_start(struct usb_gadget *g,
 			goto done;
 		}
 	} else {
+		status = 0;
 		if (can_pullup(udc))
 			pullup_enable(udc);
 		else
-- 
2.17.0

[PATCH 4/4] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E

[Aaro Koskinen]

On Palm TE nothing happens when you try to use gadget drivers and plug
the USB cable. Fix by adding the board to the vbus sense quirk list.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 drivers/usb/gadget/udc/omap_udc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 7c240b1921bd..0bf755e6acea 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2033,6 +2033,7 @@ static inline int machine_without_vbus_sense(void)
 {
 	return machine_is_omap_innovator()
 		|| machine_is_omap_osk()
+		|| machine_is_omap_palmte()
 		|| machine_is_sx1()
 		/* No known omap7xx boards with vbus sense */
 		|| cpu_is_omap7xx();
-- 
2.17.0