From: Stefan Agner <stefan@agner.ch>
To: jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
l.stach@pengutronix.de, tpiepho@impinj.com
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH v2 2/3] PCI: imx6: introduce drvdata
Date: Tue, 20 Nov 2018 14:27:04 +0100 [thread overview]
Message-ID: <20181120132705.6917-2-stefan@agner.ch> (raw)
In-Reply-To: <20181120132705.6917-1-stefan@agner.ch>
Introduce driver data struct. This will simplify handling of device
specific differences.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
Changes in v2:
- Split drvdata introduction in a separate patch
- Use an array instead of individual struct imx6_pcie_drvdata declarations
drivers/pci/controller/dwc/pci-imx6.c | 38 +++++++++++++++++----------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 4a9a673b4777..7ac1a639fe91 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -39,6 +39,10 @@ enum imx6_pcie_variants {
IMX7D,
};
+struct imx6_pcie_drvdata {
+ enum imx6_pcie_variants variant;
+};
+
struct imx6_pcie {
struct dw_pcie *pci;
int reset_gpio;
@@ -50,7 +54,6 @@ struct imx6_pcie {
struct regmap *iomuxc_gpr;
struct reset_control *pciephy_reset;
struct reset_control *apps_reset;
- enum imx6_pcie_variants variant;
u32 tx_deemph_gen1;
u32 tx_deemph_gen2_3p5db;
u32 tx_deemph_gen2_6db;
@@ -58,6 +61,7 @@ struct imx6_pcie {
u32 tx_swing_low;
int link_gen;
struct regulator *vpcie;
+ const struct imx6_pcie_drvdata *drvdata;
};
/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
@@ -285,7 +289,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct device *dev = imx6_pcie->pci->dev;
- switch (imx6_pcie->variant) {
+ switch (imx6_pcie->drvdata->variant) {
case IMX7D:
reset_control_assert(imx6_pcie->pciephy_reset);
reset_control_assert(imx6_pcie->apps_reset);
@@ -327,7 +331,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
struct device *dev = pci->dev;
int ret = 0;
- switch (imx6_pcie->variant) {
+ switch (imx6_pcie->drvdata->variant) {
case IMX6SX:
ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
if (ret) {
@@ -430,7 +434,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
!imx6_pcie->gpio_active_high);
}
- switch (imx6_pcie->variant) {
+ switch (imx6_pcie->drvdata->variant) {
case IMX7D:
reset_control_deassert(imx6_pcie->pciephy_reset);
imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
@@ -468,7 +472,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
- switch (imx6_pcie->variant) {
+ switch (imx6_pcie->drvdata->variant) {
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
@@ -560,7 +564,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
/* Start LTSSM. */
- if (imx6_pcie->variant == IMX7D)
+ if (imx6_pcie->drvdata->variant == IMX7D)
reset_control_deassert(imx6_pcie->apps_reset);
else
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -585,7 +589,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
tmp |= PORT_LOGIC_SPEED_CHANGE;
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
- if (imx6_pcie->variant != IMX7D) {
+ if (imx6_pcie->drvdata->variant != IMX7D) {
/*
* On i.MX7, DIRECT_SPEED_CHANGE behaves differently
* from i.MX6 family when no link speed transition
@@ -703,8 +707,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
pci->ops = &dw_pcie_ops;
imx6_pcie->pci = pci;
- imx6_pcie->variant =
- (enum imx6_pcie_variants)of_device_get_match_data(dev);
+ imx6_pcie->drvdata = of_device_get_match_data(dev);
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
@@ -748,7 +751,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(imx6_pcie->pcie);
}
- switch (imx6_pcie->variant) {
+ switch (imx6_pcie->drvdata->variant) {
case IMX6SX:
imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
"pcie_inbound_axi");
@@ -835,11 +838,18 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
imx6_pcie_assert_core_reset(imx6_pcie);
}
+static const struct imx6_pcie_drvdata drvdata[] = {
+ [IMX6Q] = { .variant = IMX6Q },
+ [IMX6SX] = { .variant = IMX6SX },
+ [IMX6QP] = { .variant = IMX6QP },
+ [IMX7D] = { .variant = IMX7D },
+};
+
static const struct of_device_id imx6_pcie_of_match[] = {
- { .compatible = "fsl,imx6q-pcie", .data = (void *)IMX6Q, },
- { .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
- { .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, },
- { .compatible = "fsl,imx7d-pcie", .data = (void *)IMX7D, },
+ { .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], },
+ { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
+ { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
+ { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
{},
};
--
2.19.1
next prev parent reply other threads:[~2018-11-20 13:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-20 13:27 [PATCH v2 1/3] PCI: dwc: allow to limit registers set length Stefan Agner
2018-11-20 13:27 ` Stefan Agner [this message]
2018-11-20 14:36 ` [PATCH v2 2/3] PCI: imx6: introduce drvdata Lucas Stach
2018-11-20 13:27 ` [PATCH v2 3/3] PCI: imx6: limit DBI register length Stefan Agner
2018-11-20 14:37 ` Lucas Stach
2018-11-28 0:56 ` Andrey Smirnov
2018-11-28 1:12 ` Fabio Estevam
2018-11-28 1:28 ` Andrey Smirnov
2018-11-28 12:45 ` Stefan Agner
2018-11-20 14:35 ` [PATCH v2 1/3] PCI: dwc: allow to limit registers set length Lucas Stach
2018-11-20 15:14 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181120132705.6917-2-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=bhelgaas@google.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=tpiepho@impinj.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).