linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	netdev@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] net: stmmac: Move debugfs init/exit to ->probe()/->remove()
Date: Fri, 23 Nov 2018 13:21:22 +0100	[thread overview]
Message-ID: <20181123122122.18957-1-thierry.reding@gmail.com> (raw)

From: Thierry Reding <treding@nvidia.com>

Setting up and tearing down debugfs is current unbalanced, as seen by
this error during resume from suspend:

    [  752.134067] dwc-eth-dwmac 2490000.ethernet eth0: ERROR failed to create debugfs directory
    [  752.134347] dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration

The imbalance happens because the driver creates the debugfs hierarchy
when the device is opened and tears it down when the device is closed.
There's little gain in that, and it could be argued that it is even
surprising because it's not usually done for other devices. Fix the
imbalance by moving the debugfs creation and teardown to the driver's
->probe() and ->remove() implementations instead.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
This applies on top of net-next.

 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 076a8be18d67..3ced86ac2ab1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2550,12 +2550,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 			netdev_warn(priv->dev, "PTP init failed\n");
 	}
 
-#ifdef CONFIG_DEBUG_FS
-	ret = stmmac_init_fs(dev);
-	if (ret < 0)
-		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
-			    __func__);
-#endif
 	priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
 
 	if (priv->use_riwt) {
@@ -2756,10 +2750,6 @@ static int stmmac_release(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-#ifdef CONFIG_DEBUG_FS
-	stmmac_exit_fs(dev);
-#endif
-
 	stmmac_release_ptp(priv);
 
 	return 0;
@@ -4397,6 +4387,13 @@ int stmmac_dvr_probe(struct device *device,
 		goto error_netdev_register;
 	}
 
+#ifdef CONFIG_DEBUG_FS
+	ret = stmmac_init_fs(ndev);
+	if (ret < 0)
+		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
+			    __func__);
+#endif
+
 	return ret;
 
 error_netdev_register:
@@ -4432,6 +4429,9 @@ int stmmac_dvr_remove(struct device *dev)
 
 	netdev_info(priv->dev, "%s: removing driver", __func__);
 
+#ifdef CONFIG_DEBUG_FS
+	stmmac_exit_fs(ndev);
+#endif
 	stmmac_stop_all_dma(priv);
 
 	stmmac_mac_set(priv, priv->ioaddr, false);
-- 
2.19.1


             reply	other threads:[~2018-11-23 12:21 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-23 12:21 Thierry Reding [this message]
2018-11-23 12:44 ` [PATCH] net: stmmac: Move debugfs init/exit to ->probe()/->remove() Jose Abreu
2018-11-23 13:12   ` Thierry Reding
2018-11-26 15:34   ` Thierry Reding
2018-11-27  9:02     ` Jose Abreu
2018-11-27 14:35       ` Thierry Reding
2018-11-27 13:21 ` [PATCH v2] " Thierry Reding
2018-11-28  9:38   ` Jose Abreu
2018-11-28  9:41     ` Thierry Reding
2018-11-30 21:16   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181123122122.18957-1-thierry.reding@gmail.com \
    --to=thierry.reding@gmail.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).