From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: stakanov <stakanov@eclipso.eu>
Cc: Takashi Iwai <tiwai@suse.de>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael Ira Krufky <mkrufky@linuxtv.org>,
Sean Young <sean@mess.org>, Brad Love <brad@nextdimension.cc>,
Malcolm Priestley <tvboxspy@gmail.com>
Subject: Re: DVB-S PCI card regression on 4.19 / 4.20
Date: Tue, 27 Nov 2018 16:09:11 -0200 [thread overview]
Message-ID: <20181127160911.2e4ba1fc@coco.lan> (raw)
In-Reply-To: <45396912.h74atscUxZ@roadrunner.suse>
Em Tue, 27 Nov 2018 16:58:58 +0100
stakanov <stakanov@eclipso.eu> escreveu:
> In data martedì 27 novembre 2018 13:49:46 CET, Mauro Carvalho Chehab ha
> scritto:
> > Hi Stakanov,
> >
> > Em Tue, 27 Nov 2018 11:02:57 +0100
> >
> > stakanov <stakanov@eclipso.eu> escreveu:
> > > In data lunedì 26 novembre 2018 14:31:09 CET, Takashi Iwai ha scritto:
> > > > On Fri, 23 Nov 2018 18:26:25 +0100,
> > > >
> > > > Mauro Carvalho Chehab wrote:
> > > > > Takashi,
> > > > >
> > > > > Could you please produce a Kernel for Stakanov to test
> > > > > with the following patches:
> > > > >
> > > > > https://patchwork.linuxtv.org/patch/53044/
> > > > > https://patchwork.linuxtv.org/patch/53045/
> > > > > https://patchwork.linuxtv.org/patch/53046/
> > > > > https://patchwork.linuxtv.org/patch/53128/
> > > >
> > > > Sorry for the late reaction. Now it's queued to OBS
> > > > home:tiwai:bsc1116374-2 repo. It'll be ready in an hour or so.
> > > > It's based on 4.20-rc4.
> > > >
> > > > Stakanov, please give it a try later.
> > > >
> > > >
> > > > thanks,
> > > >
> > > > Takashi
> > >
> > > O.K. this unbricks partially the card.
> >
> > From the logs, the Kernel is now working as expected.
> >
> > > Now hotbird does search and does sync
> > > on all channels. Quality is very good. Astra still does interrupt the
> > > search immediately and does not receive a thing. So it is a 50% brick
> > > still, but it is a huge progress compared to before.
> >
> > As I said before, you need to tell Kaffeine what's the LNBf that you're
> > using. The LNBf is a physical device[1] that it is installed on your
> > satellite dish. There's no way to auto-detect the model you actually have,
> > so you need to provide this information to the digital TV software you're
> > using.
> >
> > [1] It looks like this:
> > https://upload.wikimedia.org/wikipedia/commons/thumb/8/8c/Astra_lnb.jpg/
> 240
> > px-Astra_lnb.jpg
> >
> > The "Universal" one is for an old universal model sold in Europe about
> > 15 years ago. It doesn't support all transponders found on an Astra
> > satellite.
> >
> > For those, you need to use the LNBf that it is known as "Astra 1E"[2].
> >
> > [2] The name is there just for historical reasons. The actual Astra 1E
> > satellite was retired, but another satellite occupies the same orbital
> > position (19.2°E), and they keep adding/retiring satellites there as
> > needed (https://en.wikipedia.org/wiki/Astra_19.2%C2%B0E).
> >
> > As I pointed you on a past e-mail, when you set the DVB-S board on
> > Kaffeine, you should have explicitly set it.
> >
> > If you start Kaffeine in English:
> >
> > $ LANG=C kaffeine
> >
> > You'll see it at the following menu:
> >
> > Television -> Configure Television -> Device 0
> >
> > (assuming that your device is device 0)
> >
> > There, you need to tell that you'll be using a DiSEqC swith. It
> > will then allow you to select up to 4 satellite sources. Once you
> > set a source, it will allow you to edit the LNB <n> Settings
> > (where <n> will be 1 to 4). Clicking there, it will present you
> > a menu with all known LNBf models. Astra 1E is the third option[3].
> >
> > [3] yeah, on a separate discussion, we should likely rename "Astra 1E"
> > to just "Astra", and place it as the first option. I'll do such change,
> > but it will be at v4l-utils package (libdvbv5) and it will probably
> > take some time until distros start packaging the new version, even
> > if we add it to the stable branch.
> >
> > > I paste the output of the directory below, unfortunately the opensuse
> > > paste
> > > does not work currently so I try here, sorry if this is long.
> > >
> > > Content of the directory 99-media.conf created following the indications
> > > (please bear in mind that I have also another card installed (Hauppauge
> > > 5525) although it was not branched to the sat cable and i did change the
> > > settings in Kaffeine to use only the technisat. But my understanding is
> > > limited if this may give "noise" in the output, so I thought to underline
> > > it, just FYI.
> > > Output:
> > Looks ok to me.
> >
> > > [ 649.009548] cx23885 0000:03:00.0: invalid short VPD tag 01 at offset 1
> > > [ 649.011439] r8169 0000:06:00.0: invalid short VPD tag 00 at offset 1
> >
> > Those two above are weird... It seems to be related to some issue that
> > the PCI core detected:
> >
> > drivers/pci/vpd.c: pci_warn(dev, "invalid %s VPD tag
> > %02x at offset %zu",
> >
> > I've no idea what they mean, nor if you'll face any issues related to it.
> >
> > Thanks,
> > Mauro
> The two are known annoyances especially the cx23885 complaining in the logs
> about a "wrong revision". But as they AFAIK do not cause major issues or
> havoc, it is not a problem, at least for me.
Ok, good!
> Now, the card suddenly works. The only thing you have to do (limited to this
> technisat PCI card, not applicable to the Hauppauge PCI-e mounted on the same
> machine) is to set the "square" to high voltage, limited for Astra. Hotbird
> scans better without this, with "no setting send" as I do for the Hauppauge as
> well.
> This must be something weird related to our sat dish.
That setting is needed if you have a longer cabling, thinner wiring or
loses at the connectors. Not really an issue. Just a setup that makes the
DVB card to use a higher voltage when powering up the LNBf and switching
the polarization, in order to compensate for cable loses.
>
> But the GOOD news is: yes now you made it! The card works. And yes, you should
> really rename ASTRA E setting. Maybe also be more clear or give some hint in
> kaffeine when hovering over it, about how to set it, for some reason it came
> straightforward to me to click on the right radio button to select the type of
> satellite, but I did not understand, nor did suspect, I would be able to set,
> or that I would have to set the left button (must be a cultural deformation,
> or whatever). Once you told me about I did find it, but in my very limited
> experience, I think that could be enhanced.
Just pushed a patch renaming it. That patch will make Astra the default on
Kaffeine too:
https://patchwork.linuxtv.org/patch/53172/
It is for the DVB library used by Kaffeine.
>
> So congratulations. It works and now I am officially even more impressed about
> Linux and the spirit behind it. Compliments and thank you all for your work
> and time!
>
> Regards.
>
>
>
> _________________________________________________________________
> ________________________________________________________
> Ihre E-Mail-Postfächer sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de
>
>
Thanks,
Mauro
next prev parent reply other threads:[~2018-11-27 18:09 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4e0356d6303c128a3e6d0bcc453ba1be@mail.eclipso.de>
[not found] ` <20181120104217.5b487bcd@coco.lan>
[not found] ` <1593929.t9Y74Rdlh1@roadrunner.suse>
2018-11-20 16:08 ` DVB-S PCI card regression on 4.19 / 4.20 Mauro Carvalho Chehab
2018-11-21 21:20 ` Malcolm Priestley
2018-11-22 15:55 ` Mauro Carvalho Chehab
2018-11-22 16:19 ` Mauro Carvalho Chehab
2018-11-22 18:58 ` stakanov
2018-11-22 20:06 ` Mauro Carvalho Chehab
2018-11-22 20:19 ` stakanov
2018-11-22 20:35 ` Mauro Carvalho Chehab
2018-11-22 21:44 ` stakanov
2018-11-23 15:55 ` stakanov
2018-11-23 17:26 ` Mauro Carvalho Chehab
2018-11-26 13:31 ` Takashi Iwai
2018-11-27 10:02 ` stakanov
2018-11-27 12:49 ` Mauro Carvalho Chehab
2018-11-27 15:58 ` stakanov
2018-11-27 16:03 ` Takashi Iwai
2018-11-27 17:53 ` Mauro Carvalho Chehab
2018-11-27 18:09 ` Mauro Carvalho Chehab [this message]
2018-11-19 15:13 Takashi Iwai
2018-11-19 17:53 ` Mauro Carvalho Chehab
2018-11-19 19:07 ` Malcolm Priestley
2018-11-19 19:47 ` Takashi Iwai
2018-11-19 22:59 ` stakanov
2018-11-19 23:08 ` Mauro Carvalho Chehab
2018-11-19 23:19 ` stakanov
2018-11-19 23:58 ` Mauro Carvalho Chehab
2018-11-20 8:07 ` stakanov
2018-11-20 9:18 ` Mauro Carvalho Chehab
2018-11-20 9:51 ` stakanov
2018-11-20 9:54 ` Takashi Iwai
2018-11-20 10:26 ` Mauro Carvalho Chehab
2018-11-20 11:11 ` Takashi Iwai
2018-11-20 11:28 ` Mauro Carvalho Chehab
2018-11-20 7:12 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181127160911.2e4ba1fc@coco.lan \
--to=mchehab+samsung@kernel.org \
--cc=brad@nextdimension.cc \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mkrufky@linuxtv.org \
--cc=sean@mess.org \
--cc=stakanov@eclipso.eu \
--cc=tiwai@suse.de \
--cc=tvboxspy@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).